Fantastic! You have actually just solved the problem that came up a couple of days ago on my Jaguar. The check engine light came on and stayed on then randomly went off, been doing the same thing over the last few days. This video appeared in my suggested videos so I watched it, checked the valve on my car and it was in the open position. I moved it back and forth and as pointed out in the video, the spring was broken! This will be my little project when the extension spring arrives!
@@crystalclearmechanicsBeen working great however, just developed a red restricted performance message. Diagnostic code is P0490-72 which is EGR circuit high. From what I can see, the vacuum doesn't seem to switch off so the valve remains open, do you think that would be a solenoid issue? After watching your EGR removal video, I'm thinking of giving that a go to give it a really good clean and will give me a chance to check as many of the pipes as I can!
Hi, the coolant manifold is split internally into 2 sections / channels, one being direct the other being cooled, the vacuum unit only diverts the gas between the two.@@draven_7621
Fantastic this is mate, just had the engine management light come on, obd reader saying p245a, followed your video to a tee, lights now gone off thank you very much 🙏🏻
Great tip - thank you. I don’t usually do any work on my XF but I thought I’d give this a go. It took a while to locate a spring (EBay) but fitting only took a few minutes. The warning light stayed on initially, but went out after a few trips.
Hi, thank you for watching and for your feedback. I get the springs from a local fasteners ( nuts and bolts etc ) shop that keep boxes of assorted springs in stock. I'm glad it cured your issue.
Hi, thanks for your feedback. We shape and paint the bracket to finish off so it blends in, but for simplicity left it as is for the video. Many thanks again for your feedback.
Thank you very much for your feedback, I am glad the video was able to help you. I buy the springs from a fastener shop ( nuts and bolt shop ). I finish the brackets by shaping and painting to blend them in. Thanks again for watching.
I managed to locate a set of springs from Amazon for £16:99 which is a hell of a lot cheaper than taking it to JLR and then charging me £400+. Thank you so much for this video you have saved much stress, inconvenience and money lol 👍🏼
Fantastic! Great video and saved me a fortune! The engine management light remains on though. Do I need to reset the light via the OBD or will it go off eventually?
Great video, thanks so much. I've just done this to mine but the light is still on. Not sure if I need a stronger spring or if the light will go out on its own eventually? Thanks
Thanks for the feedback Mohammed we appreciate that, we left the bracket as it was for the video but we do shape and paint them to blend in to make it look original. Many thanks again.
Very useful tip but I seem to have a different problem with the egr solenoid on my XF. The spring looks to be intact but I cannot move the actuator arm freely in and out like you do at 6:22 in your video.
Hi Malcolm, thank you for watching and for your feedback. The arm you mention is connected to a diaphragm ( not a solenoid ), it works on vacuum. The spring gives some resistance but it should move in and out freely. Try disconnecting the arm from the lever to see which is causing the issue.
@@crystalclearmechanics Thank you for very prompt reply. I have just disconnected the arm and everything seems ok. The arm moves freely and the lever with the spring on does move with a fair bit of resistance. I will borrow my friends scanner to check codes and see if I am looking in the right place for my intermittent engine light. Thank you again.
Hello - this is a great video and thanks for sharing. I believe I have the same issue with my Jag XF. I have an engine management light on with the code relating to the EGR: P0407-16 Exhaust Gas Recirculation Sensor B Circuit Low. Will this hopefully get rid of the engine light?
Hi great video. Do you have a suggestion on how the little bracket could be fitted back on as my 1 has came of and i think the spring is broken as it just spins around?
Hi William, the plate with the ball joint that the plastic rod fits too that plate should go backwards and forwards, it should not spin around in a circle if it does spin then it has seperated where it joins the spindle at the top or it has seperated from the butterfly valve inside the manifold. On top could be spot welded, inside you would have to take the manifold or part of the manifold off to repair it. The vacuum solonoid sucks the butterfly valve in to close off the radiator side of the manifold and when it releases it opens it so the gas passes through. The vacuum valve controls your engine warning light not the butterfly valve. If you have more questions please ask@@williamdewar4662
Hello! I have a 2015 jaguar xf x250 2.2 D. I have been having recurring problems like you described in your video. I opened the hood and saw that I do not have a spring as you showed. I am from Sweden. Is it normal?
@@crystalclearmechanics the code is p245a. I get the engine light symbol, repeatedly. I saw your video, went to the car and saw that I don't have the spring.. The car behaves normally and normal performance. I bought CRC carp & ERG cleaner pro today, hope it works.
Hi thanks for watching the video, the code P245a is for the exhaust gas recirculation cooler manifold. The fault code will show for a few reasons, these being the most common. 1. The broken spring. 2. Vacuum feed or vacuum actuator fault 3. Electrical sensor ( integral too vacuum actuator ) or connection. The good news is, all the above faults are easy to access and diagnose. Remember the vacuum actuator will return back if released so best to check the spring with the ball joint seperated from the lever if it is not obvious. Thanks again for watching.
@@crystalclearmechanics ehhhh guys, today took a look and prised off that ball joint, and the spring didnt move !!! Perfect just as u said, spring broken ! So i made a temp spring out of a circlip i had lying about and made a bracket much like ur own. Put it all back and spring working. Only issue is u cant tell if it all works as u need the engine to kick into that situation that it opens that valve ?? Well, we will c ? I also erased the p245a fault code. So thanx again, time will tell. Wish i cud send u the short vid i made !
@@arnietwo11 Hi, glad it worked. Jaguar will only sell the 2 parts together ( part with the spring and the coolant manifold ) £400 + then you have to fit it all. If it does not cure the issue, your code will register again. Thanks again for the feedback.
@@crystalclearmechanics so if it doesnt cure issue, is it then take off egr and clean it manually ? Ive seen a few vids showing egr cleaner spray and it appears they do nothing ?
@@arnietwo11 Hi, no the code P245a is specific to the coolent manifold / vacuum unit. The vacuum unit stuck in one position ( broken return spring ) or faulty due to another cause will register that code only.
Hi Ian, thank you for watching and for your feedback. The vacuum valve fitted on top of the manifold with the electrical connection ( check the electrical connection is good ) triggers the fault code if it does not open and shut correctly, it's the spring coil that snaps which is hard to see but if you're sure the spring is sound then check the vacuum valve arm is moving freely , if not then check the vacuum pipe to the vacuum valve has vacuum also disconnect the vacuum arm to the lever (spring end) and check the lever moves freely and is tensioned. The diaphragm in the vacuum valve could be faulty or the valve itself could be faulty. The lever (spring end) operates a butterfly valve inside the manifold which allows exhaust gas to go through or bypass the radiator in the manifold. .
@crystalclearmechanics thank you kindly for a quick reply and details. I have disconnected the arm, and the gate returns fully. When the engine is switched off. Around 4 minutes later, the vacuum releases the arm and shuts again. But it looks like the arm is full in the diaphragm, i.e., in the open possession all the time. I will check the connections and wiring. Thank you kindly once again 🙏
Also I have had my jaguar remapped which they have took the egr of the software to stay shut but when I looked at it it is open still would this be because the spring is broke which it is would that be why the ECU won't close the egr valve cheers.
Hi Zack, thank you for watching. I use and cut to size brackets i had, but you can buy them from car shops / builders merchants etc. cut them to size drill holes if neccessary and to finish, shape and paint them. You can drill a small hole in the side of the plastic cam belt cover to connect the spring without a bracket if you want too.
@@ZackArmstrong-jb1nq Hi Zack, The EGR coolant manifold has 2 sections, a butterfly valve operates between them, one allows exhaust gas to flow through the section / half containing the coolant radiator, the other section / half is a bypass. The vacuum solenoid is designed when needed, to shut / or partly shut off the radiator side via the butterfly valve, The return spring ( that breaks ) opens up the radiator side via the butterfly valve.
Fantastic! You have actually just solved the problem that came up a couple of days ago on my Jaguar. The check engine light came on and stayed on then randomly went off, been doing the same thing over the last few days. This video appeared in my suggested videos so I watched it, checked the valve on my car and it was in the open position. I moved it back and forth and as pointed out in the video, the spring was broken! This will be my little project when the extension spring arrives!
Hi, thank you for watching and for your feedback. Glad it helped.
@@crystalclearmechanicsBeen working great however, just developed a red restricted performance message. Diagnostic code is P0490-72 which is EGR circuit high. From what I can see, the vacuum doesn't seem to switch off so the valve remains open, do you think that would be a solenoid issue? After watching your EGR removal video, I'm thinking of giving that a go to give it a really good clean and will give me a chance to check as many of the pipes as I can!
Hi, the coolant manifold is split internally into 2 sections / channels, one being direct the other being cooled, the vacuum unit only diverts the gas between the two.@@draven_7621
Fantastic this is mate, just had the engine management light come on, obd reader saying p245a, followed your video to a tee, lights now gone off thank you very much 🙏🏻
Hi, thank you for watching and for your feedback. Glad the video was helpful.
Great tip - thank you. I don’t usually do any work on my XF but I thought I’d give this a go. It took a while to locate a spring (EBay) but fitting only took a few minutes. The warning light stayed on initially, but went out after a few trips.
Hi, thank you for watching and for your feedback. I get the springs from a local fasteners ( nuts and bolts etc ) shop that keep boxes of assorted springs in stock. I'm glad it cured your issue.
That is a superb tip. Thanks for sharing.
Hi, thanks for your feedback. We shape and paint the bracket to finish off so it blends in, but for simplicity left it as is for the video. Many thanks again for your feedback.
I’m having this issue but struggling to locate a spring I have a suitable bracket, but your video has helped me a lot thank you 👍🏼
Thank you very much for your feedback, I am glad the video was able to help you. I buy the springs from a fastener shop ( nuts and bolt shop ). I finish the brackets by shaping and painting to blend them in. Thanks again for watching.
I managed to locate a set of springs from Amazon for £16:99 which is a hell of a lot cheaper than taking it to JLR and then charging me £400+. Thank you so much for this video you have saved much stress, inconvenience and money lol 👍🏼
@@SJG81 Many thanks.
Definitely worth a thumbs up :)
Hi, thank you fo.r watching and for your feedback
Fantastic! Great video and saved me a fortune! The engine management light remains on though. Do I need to reset the light via the OBD or will it go off eventually?
Great video, thanks so much. I've just done this to mine but the light is still on. Not sure if I need a stronger spring or if the light will go out on its own eventually? Thanks
Fantastic thank you very much
Hi, thank you for watching and for your feedback.
HI Nick, Really helpful, thanks for the video. I'll have a go at mine tomorrow. Where are you based? Thanks
fantastic thank you so much
Hi, thank you for watching the video and for the feedback, it's much appreciated.
thank you
Hi, thank you for watching and for your feedback.
thanks mate
£1 instead of £400, Love it!!!
Thank you for watching and for your feedback.
excellent very helpful thx
Thanks for the feedback Mohammed we appreciate that, we left the bracket as it was for the video but we do shape and paint them to blend in to make it look original. Many thanks again.
Very useful tip but I seem to have a different problem with the egr solenoid on my XF. The spring looks to be intact but I cannot move the actuator arm freely in and out like you do at 6:22 in your video.
Hi Malcolm, thank you for watching and for your feedback. The arm you mention is connected to a diaphragm ( not a solenoid ), it works on vacuum. The spring gives some resistance but it should move in and out freely. Try disconnecting the arm from the lever to see which is causing the issue.
@@crystalclearmechanics Thank you for very prompt reply. I have just disconnected the arm and everything seems ok. The arm moves freely and the lever with the spring on does move with a fair bit of resistance.
I will borrow my friends scanner to check codes and see if I am looking in the right place for my intermittent engine light. Thank you again.
Hello - this is a great video and thanks for sharing. I believe I have the same issue with my Jag XF. I have an engine management light on with the code relating to the EGR:
P0407-16 Exhaust Gas Recirculation Sensor B Circuit Low.
Will this hopefully get rid of the engine light?
Hi, thank you for watching and for your feedback. The fix shown has the fault code P245a.
After changing egr, did you have to reprogram anything or map it? I have changed mine, car drove for 2mins, died, won't start
Great video, but did you film it whilst on the hard shoulder of the M1. Lol
Hi, yes I watched the video and see what you mean but I did pick a quiet spot on the M1. Lol
Hi great video.
Do you have a suggestion on how the little bracket could be fitted back on as my 1 has came of and i think the spring is broken as it just spins around?
Hi William, thank you for watcing and for your feedback. Could you clarify the bracket etc, not sure what you mean. Thanks.
@@crystalclearmechanics the small metal plate that sits above the spring and is attached to the plastic rod. my spring and plate has broken
Hi William, the plate with the ball joint that the plastic rod fits too that plate should go backwards and forwards, it should not spin around in a circle if it does spin then it has seperated where it joins the spindle at the top or it has seperated from the butterfly valve inside the manifold. On top could be spot welded, inside you would have to take the manifold or part of the manifold off to repair it. The vacuum solonoid sucks the butterfly valve in to close off the radiator side of the manifold and when it releases it opens it so the gas passes through. The vacuum valve controls your engine warning light not the butterfly valve. If you have more questions please ask@@williamdewar4662
👏
The dealer blanked my EGR and deleted both out the cooler was same and also knackered my EGR valve
@ianbloxham-co1xz Hi Ian thank you for watching. Did the dealer blank the EGR valve because of the fault shown in my video or for another reason.
Hello! I have a 2015 jaguar xf x250 2.2 D. I have been having recurring problems like you described in your video. I opened the hood and saw that I do not have a spring as you showed. I am from Sweden. Is it normal?
Hi, thank you for watching and for your feedback. Can you tell me the symptoms and the codes if you have them.
@@crystalclearmechanics the code is p245a. I get the engine light symbol, repeatedly. I saw your video, went to the car and saw that I don't have the spring.. The car behaves normally and normal performance. I bought CRC carp & ERG cleaner pro today, hope it works.
Thanx, got the fault code, P245a, so think this might be the problem. Will need to check and see if spring is broken ??
Hi thanks for watching the video, the code P245a is for the exhaust gas recirculation cooler manifold. The fault code will show for a few reasons, these being the most common. 1. The broken spring. 2. Vacuum feed or vacuum actuator fault 3. Electrical sensor ( integral too vacuum actuator ) or connection. The good news is, all the above faults are easy to access and diagnose. Remember the vacuum actuator will return back if released so best to check the spring with the ball joint seperated from the lever if it is not obvious. Thanks again for watching.
@@crystalclearmechanics ehhhh guys, today took a look and prised off that ball joint, and the spring didnt move !!! Perfect just as u said, spring broken ! So i made a temp spring out of a circlip i had lying about and made a bracket much like ur own. Put it all back and spring working. Only issue is u cant tell if it all works as u need the engine to kick into that situation that it opens that valve ??
Well, we will c ? I also erased the p245a fault code. So thanx again, time will tell.
Wish i cud send u the short vid i made !
@@arnietwo11 Hi, glad it worked. Jaguar will only sell the 2 parts together ( part with the spring and the coolant manifold ) £400 + then you have to fit it all. If it does not cure the issue, your code will register again. Thanks again for the feedback.
@@crystalclearmechanics so if it doesnt cure issue, is it then take off egr and clean it manually ?
Ive seen a few vids showing egr cleaner spray and it appears they do nothing ?
@@arnietwo11 Hi, no the code P245a is specific to the coolent manifold / vacuum unit. The vacuum unit stuck in one position ( broken return spring ) or faulty due to another cause will register that code only.
I have the exact same problem with the code. Unfortunately, the sprung is intact. Please advise me.
Cheers
Ian
Hi Ian, thank you for watching and for your feedback. The vacuum valve fitted on top of the manifold with the electrical connection ( check the electrical connection is good ) triggers the fault code if it does not open and shut correctly, it's the spring coil that snaps which is hard to see but if you're sure the spring is sound then check the vacuum valve arm is moving freely , if not then check the vacuum pipe to the vacuum valve has vacuum also disconnect the vacuum arm to the lever (spring end) and check the lever moves freely and is tensioned. The diaphragm in the vacuum valve could be faulty or the valve itself could be faulty. The lever (spring end) operates a butterfly valve inside the manifold which allows exhaust gas to go through or bypass the radiator in the manifold. .
@crystalclearmechanics thank you kindly for a quick reply and details. I have disconnected the arm, and the gate returns fully.
When the engine is switched off. Around 4 minutes later, the vacuum releases the arm and shuts again. But it looks like the arm is full in the diaphragm, i.e., in the open possession all the time. I will check the connections and wiring. Thank you kindly once again 🙏
What size spring was the one you used mate?
Hi, thank you for watching and for your feedback. I show the measurements of the spring at 4.19 minutes into the video.
@@crystalclearmechanics that's why I get for getting excited and not watching the whole video 😅 Thanks mate
Hi, did you experience P088 code with xf 2.2 diesel?
Hi, no I didn't, that code refers to fuel rail pressure to high.
Thank you
Hello where abouts could I purchase a bracket cheers.
Also I have had my jaguar remapped which they have took the egr of the software to stay shut but when I looked at it it is open still would this be because the spring is broke which it is would that be why the ECU won't close the egr valve cheers.
Hi Zack, thank you for watching. I use and cut to size brackets i had, but you can buy them from car shops / builders merchants etc. cut them to size drill holes if neccessary and to finish, shape and paint them. You can drill a small hole in the side of the plastic cam belt cover to connect the spring without a bracket if you want too.
@@ZackArmstrong-jb1nq Hi Zack, The EGR coolant manifold has 2 sections, a butterfly valve operates between them, one allows exhaust gas to flow through the section / half containing the coolant radiator, the other section / half is a bypass. The vacuum solenoid is designed when needed, to shut / or partly shut off the radiator side via the butterfly valve, The return spring ( that breaks ) opens up the radiator side via the butterfly valve.
buy honda.