Це відео не доступне.
Перепрошуємо.
How to Replace Door Latch Assembly 1994-2004 Chevy S-10
Вставка
- Опубліковано 11 кві 2021
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/21/az...
A rusted or frozen door latch assembly could cause problems with your door closing or securing properly, so it should be replaced. This video shows you how to install a new door latch assembly on your 1994-2004 Chevy S-10.
• Check here for more videos on the 1994-2004 Chevy S-10 • Chevy S-10 2nd Generat...
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Flat Blade Screwdriver 1aau.to/otN/1AX...
• Phillips Head Screwdriver 1aau.to/otN/1AX...
• Trim Tool Set 1aau.to/oga/1AX...
• Marker / Writing Utensil
Subscribe: / @trq
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: • Chevy S-10 2nd Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
No results found for "Door Latch Assembly", on a 2000 Blazer Chevrolet
Such a clear, concise video. If there were an Oscar award for instructional videos, you would take home the trophy
I am about to do this on my S10, with 330,000 miles. Not surprised it broke, but your video shows me EXACTLY how to do it. Great video and explanations. Thank you so much.
Thank you. Helped me out so much! And saved me money doing it myself!
This is INSANELY complicated. I will just cut the door off.
Very good clear instructions. Easy to.understandn very good video also. This is the best instructional video on You Tube.
Thank you. P.s
This does work on a 2001 blazer.
100% Went to the junkyard and used a trailblazer door for my S10
Excelent vid. My 98 Blazer dome and floor lights stay on while driving.
Thinking it’s somewhere in that switch but after seeing this, if I can’t diagnose I’m going to pull the bulbs….
+MCAlife Thanks for watching our video! 1aau.to/m/Shop-TRQ
The steps are the same but parts are very different. I just put s driver door of a 2000 bla,er on my 2003 s10. I had to change lots of parts inside the door .the wiring was different ,because it was a 4 door blazer and the latch is different my latch has 1 harness that plugs into it. The blazer latch had 2 harnesses so I had to swap it.
definitely needed this. My door locks barely work should I just do the motors or save for the actual latch assembly? my phobe for door locks also is broken so can I program in a new one without it?
Thank you for posting this.
I have a 2004 blazer and just recently replaced the locking mechanism. In the video it shows 3 electrical connectors but my car only has 2 but the locking mechanism had 3 electrical ports as well. I did buy this car used to I'm wondering if the electrical connectors were replaced or if it's fine to have only two?
What size are the 2 bolts that hold the outside handle in place? I lost one and the handle feels like its coming off
Great informational video!
does this work for 01 chevy blazer?
It would. Same base vehicle with the same interior.
thanks