Hi mark new to Rcs yr the first channel I found that explains the memory card,brilliant thank you.at the moment I got the hpi jump shot st v2 and it’s brushed I was wondering on yr video the set up would u be able to put this on my hpi?or would you recommend another set?thank you subscribed btw
Hello mate, thank you for subscribing I am glad you found the video help. As you have the V2.0 your gears should be able to handle brushless and this type of system would be perfect 👍
Hi mate, yeah it’s definitely a nice place to fly, it’s where I mainly go to fly, I have plenty of RC drone and plane videos flying in that spot, go check them out I’m sure your like them 👍
My 60 amp esc looks identical it's called "9imod" I even have that program card you have that works with my surpass esc fine....Problem is I want to use it on my 9imod and it does not work...I just need to increase the brakes..any idea how to ? Can it be adjusted without program card? Thanks for your help...😊
Thanks a lot mate, 👍 I’m looking forward to getting it in the TT01E and taking it for a rip, I’m also looking forward to seeing more of your t-maxx videos 😉
Just playing with these but whats a max voltage one could pump into one of these assuming its nit over speeding due to load? And what would be a good water cooled esc for such an application? Or even just a good esc thats cheap enough to modify.
Hi mate, 11.1v max for these. And I personally would not bother with water cooling, a good fan will work better then a water cooled system as the esc in not enclosed, water cooling is more for enclosed systems like boats or PCs.
@@MarcRCAddict I'm doing a boat lol what would be a good place to start for something that can take 48v moderately well? Kinda of a big boat lol. Ideally I wanna run it off tool batteries in series but I'm willing to try other things. I'm hoping for somewhere in the 3-10hp range as in 3 would work 10 would be as far as I'd be okay with going.
@@oliverscorsim lol ah that sounds cool mate. Unfortunately that’s not something I can help with though really as it’s not my field, your best bet would be ask the advice of someone has lots of RC boat experience..
Do you have any link for this ot know the brand, can I get in America, also do you know how it compared to the goolrc esc motor, that's mainly what I see in Amazon, thanks
Hi mate, no the rustler will not hit 50 on 2s, with this brushless system or any other really, the stock gear ratio is too low and 2s is not enough power, if you want it to hit 50mph you will need 3s and change the gearing👍 happy rcing
how reliable is it i dont have the best reputation with cheaper esc and motor combos as they tend to burn out on me claiming they can handle so much voltage but never can
@@rcpete7055 Pete if your in the uk mate and on Instagram come check out my cmvinyluk page I make custom Rc decals as well as led plaques and laser engraving too, I’m sure your see lots you like 👍
Using this motor in a school project and we have to spend the lowest amount of money and we have got this motor on the car to go 50mph and it is plenty fast enough
Hi mark new to Rcs yr the first channel I found that explains the memory card,brilliant thank you.at the moment I got the hpi jump shot st v2 and it’s brushed I was wondering on yr video the set up would u be able to put this on my hpi?or would you recommend another set?thank you subscribed btw
Hello mate, thank you for subscribing I am glad you found the video help. As you have the V2.0 your gears should be able to handle brushless and this type of system would be perfect 👍
After I mount the system with 2s battery is getting hotel and cut off all time ! What u think is the problem?
Beautiful scenery,looks like a nice place to fly.
Hi mate, yeah it’s definitely a nice place to fly, it’s where I mainly go to fly, I have plenty of RC drone and plane videos flying in that spot, go check them out I’m sure your like them 👍
My 60 amp esc looks identical it's called "9imod" I even have that program card you have that works with my surpass esc fine....Problem is I want to use it on my 9imod and it does not work...I just need to increase the brakes..any idea how to ? Can it be adjusted without program card? Thanks for your help...😊
Cool motor and ESC setup, cool information and video
Thanks a lot mate, 👍
I’m looking forward to getting it in the TT01E and taking it for a rip, I’m also looking forward to seeing more of your t-maxx videos 😉
Just playing with these but whats a max voltage one could pump into one of these assuming its nit over speeding due to load? And what would be a good water cooled esc for such an application? Or even just a good esc thats cheap enough to modify.
Hi mate, 11.1v max for these. And I personally would not bother with water cooling, a good fan will work better then a water cooled system as the esc in not enclosed, water cooling is more for enclosed systems like boats or PCs.
@@MarcRCAddict I'm doing a boat lol what would be a good place to start for something that can take 48v moderately well? Kinda of a big boat lol. Ideally I wanna run it off tool batteries in series but I'm willing to try other things. I'm hoping for somewhere in the 3-10hp range as in 3 would work 10 would be as far as I'd be okay with going.
@@oliverscorsim lol ah that sounds cool mate. Unfortunately that’s not something I can help with though really as it’s not my field, your best bet would be ask the advice of someone has lots of RC boat experience..
@@MarcRCAddict thanks for the lead
I need a sheap motor like this but I want less speed any recommandations pls ?
Interesting video. Would this be suitable for converting a 4wd 1:8 nitro buggy to electric, or would it need something beefier?
Yeah definitely go with something bigger mate 👍
Do you have any link for this ot know the brand, can I get in America, also do you know how it compared to the goolrc esc motor, that's mainly what I see in Amazon, thanks
What gearing do you recommend running this on
Depends on the model your running it in mate but to be honest I run these in 4 different models and all have different gearing 👍
I completely agree I just bought one for my tamyia tt02 and it's a rocket now
Planning on putting it on a Traxxas Ruster 2wd on a 2s lipo, stock gearing. do you think it will hit 50? how fast did the stampede go?
sorry, I forgot it hit 50.
Hi mate, no the rustler will not hit 50 on 2s, with this brushless system or any other really, the stock gear ratio is too low and 2s is not enough power, if you want it to hit 50mph you will need 3s and change the gearing👍 happy rcing
@@MarcRCAddict Thanks mate!
@@twoguyspies2056 pleasure mate any more info just ask👍
how reliable is it i dont have the best reputation with cheaper esc and motor combos as they tend to burn out on me claiming they can handle so much voltage but never can
I’ve been using there’s for a few years now on 2s and 3s not had an issue as yet mate
Epic combo my brother 👍 👍 👍 cracking review. 👍 😊
Thanks gaz, 👍
Yeah for this kind of money the system is awesome, best £25 I spent this year lol
Can you use a hobbywing pragramming card?
I’m not sure mate I have never tried that, it would definitely not give the esc the extra features though I know that for sure.
@@MarcRCAddict so u think I would need to buy the stock card on ebay?
@@rcpete7055 definitely mate or from banggood 👍
@@rcpete7055 Pete if your in the uk mate and on Instagram come check out my cmvinyluk page I make custom Rc decals as well as led plaques and laser engraving too, I’m sure your see lots you like 👍
Just ordered one for my 2wd Slash.
What gearing on a traxxas slash 4x4 1/10 I’m tryna go fast
Stock gearing will be fine mate
Will it work on a 2wd 2s Traxxas slash
Hello, yes it will, I have one in my 2wd stampede 👍
@@MarcRCAddict thank you
@@Lucascausey no problem 👍
Will it work on a 4wd Traxxas Stampede, 2 or 3s?
I just put one in my Rustler 2wd, and it's incredible on 3s.
Glad to hear it, these are great value for money aren’t they 👍
@@MarcRCAddict I got a bit of change from £40, so yeah, when you compare it to the big brand motors, it's a steal.
@@69jonhill I’m in the same situation. How did you attach the esc to the vehicle? There’s no mount with the esc…
@@Jigsou I used double sided, 3M sticky pads.
@@69jonhill where did you put it? At the same place as the original esc?
Where to buy that truck body shell?
I got mine as a kit from my local Rc shop, Modelsport but you should be able to find them online..
Do you run the 4370 motor on 3s? Its only rated for 12v max? 3s is a little bit more volts
3s is 11.1v
@@ffran41 4.2 x 3= 12.6
@@daveg5420 3.7*, each lipo cell is rated at 3.7v. 3.7v*3=11.1v
a fully charged lipo cell is 4.2v. 3.7v is 50% of usable capacity.
Hi mate. Which way do these cables go into the Esc
anyway if reversed just sawp 2
Using this motor in a school project and we have to spend the lowest amount of money and we have got this motor on the car to go 50mph and it is plenty fast enough
That’s awesome, nicely done 👍
Hi am looking for a brushless 1/18 scale motor for my son any recommendations thanks wow that motor can go
Hi mate, what is the model your going to put it in?
@@MarcRCAddict hi it's a himoto Barren
isnt 3.1 volts really bad for a 2s lipo???? i thougth 3.2v is the lowest you should go
How would you know the voltage
just bought 2 of them Esc & 4370kv motor £25.99 on Amazon ... and a 3rd Esc & 5200kv motor £32.99 Amazon
I bought one for £60 from my local hobby shop and shortly after it went up in smoke on a 2s lipo 💀
That’s insane, first off they charged way too much and it also sounds like it was faulty, did they refund or replace it for you?
I must of had a bad one, ran mine 5 minutes and set my truck on fire
Sh mate that’s insane, hopefully the truck survived, these things can happen though, I’ve even had arrma and traxxas stuff smoke in an instant..
Damn... Still got the stampede!!!
Still into you'r Heli's? eSky Co-Comanche..