27 does not seems to be the correct value for RE. The following worked for me. set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac gpt attributes=0x8000000000000001
I am getting the same error again. I did all the steps and I allocated 1021 MB of space. During the Set Id, I used the "de94bba4-06d1-4d40-a16a-bfd50179d6ac" id because I have UEFI/GPT-based system. But, then this message popped up: "The selected volume or partition is in use. To continue with the operation use the OVERRIDE parameter." I used the OVERRIDE command to set the id, exited the diskpart, and tried to enable reagentc again, still getting the same error. What can I do? Please help. I am using Windows 11 64-bit system
ua-cam.com/video/9h2za6semYI/v-deo.html This video helped me fix the issue ... For windows 11 the options are lil different... Once u gave decryption it will take some time and after that it will work without issues...
As others pointed out - if your disk is GPT, then don't use id = 27, you need to use id=de94bba4-06d1-4d40-a16a-bfd50179d6ac and set the GPT attribute to 0x8000000000000001
Everything is done like u!! But in my 1Gb partion write like this Healthy (EFI SYSTEM PARTITION) Not like u ex in ur disk management writing like this Healthy (Recovery Partition) so if it's done or not im worried pls reply!!!
Here how i did it pls read i will help u .. I followed all his steps but unless like him my id is not 7 ... It's like 30-40 mix numbers and words So i read this comment that actually worked . U need to go to privacy and security then device encription and simply turn off that option and now open cmd and type reagentc /enable ..... And it worked .... I'm watching tons of video from past 2-4 days ..... Try this thing it may work for you THANK YOU 🙏🏼
Thanks for the great info- solved my problem (I had the wrong type on the recovery partition). And no thanks to Microsoft for a thoroughly misleading error message!
I was still getting the bitlocker issue, but found a fix for my issue: I deleted the recovery partition and created it again. With it still empty I bitlockered it, then immediately removed bitlocker. This seems to have cleared the bitlocker flag against that partition. I then set up the recovery partition as per remaining instructions and reagentc /enable now worked.
I had the same problem when trying to enable Windows RE. Unfortunately, the suggested method here did not work (deleted recovery partition and created a new one). I finally solved the issue by turning off Device encryption (from Privacy & Security -> Device encryption). Afterwards, I could enable Windows RE using REAGENTC /enable (at cmd window). Or you can try PowerShell Commands: Disable-BitLocker -MountPoint "". For example : Disable-BitLocker -MountPoint "C:" Thank you.
hi,, pls i need help from u, i saw ur videos how good u was on these partitions and i did sub direct, cause here i have much to learn,, but the help i need is 2TB partition is unallocated and i want files back like just attach back again without losing all files,, i will turn off pc i thing turning off will not be some problem to get back that partition on another day when u have time to reply to me.. im watching so much about it but i scare i will remove all, before i deleted 500GB also like this
I want to upgrade my 1 tb HDD by 500 gb SSD . i.e. i am going to replace main hard disc by new ssd and i will put HDD in caddy. I hv listened windows 10 in old hdd ... I have created HP recovery media usb. So i want to install fresh windows 10 on my new ssd . So don't use this HP recovery media USB to reinstall my licensed windows on the new SSD ????
With all respect your method does not solve the issue. This problem is happen when installing new system on old system partition without format and repartitions the whole disk. You need to remove the bitlocker deception then format or delete the old recovery partition and create new one if necessary.
i want to get my laptop out of all network acces i deleted all the system services that have a link to the internet but when i try to remove remote procedure call they say that my acces is denided i try every way i saw to gain acces and its impossible can you help?
Never seen this request before and you can't disable the Master File Table. If your MFT is bloated, I suspect what you're asking for is to "Defrag the MFT" and then "Compact the MFT" - I know Paragon HDM has these wizards offhand but I'm sure Acronis, Macrium, etc. do as well. Afaik, Windows can't do that natively
it didn't work for me. they showed my partition type is ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 i typed set id=27, they showed "The specified type is not in the correct format. For more information on the command type: HELP SET" then i exited and typed reagentc /enable, and they again showed RE cannot be emable on a volume with bitlocker
Hi @o_j_edits, I hope you were able to resolve the issue, but if not, user @Kirkaiya has pointed out the solution for this. For your information, this is because your system is using a style of partition called GUID Partition Table or GPT and in the video, IT Army has a style of partition called the Master Boot Record or MRB. SOLUTION: In your case you can create the partition using disk manager as shown in the video. and then as shown run diskpart: Select the current drive you want the RE partition to be on. >sel part >set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac >gpt attributes 0x8000000000000001 it should already be formatted as NTFS if you used the wizard to create the partition, if not you can use this: >format quick fs=ntfs label="Windows RE tools"
At timeline 3:52 you are setting id as 27. Where are you getting it from? I see you said id as 07. Confused! Could you please clarify?
By default id is 7, I changed it to 27 to use it at a recovery partition
@@itarmy2778 is it same for gdt type drives?
27 does not seems to be the correct value for RE.
The following worked for me.
set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
gpt attributes=0x8000000000000001
I just read somewhere today that 27 is where the disk is MBR. For GPT format, the other big number is the one.
It's also not working
It's in use, use override parameter
I'm getting "REAGENTC.EXE: The Windows RE image was not found." error when attempting your steps. Am I missing something?
Thank you man this was starting to look like a nightmare to do but you made it super easy!
Glad I could help
I am getting the same error again. I did all the steps and I allocated 1021 MB of space. During the Set Id, I used the "de94bba4-06d1-4d40-a16a-bfd50179d6ac" id because I have UEFI/GPT-based system. But, then this message popped up:
"The selected volume or partition is in use.
To continue with the operation use the OVERRIDE parameter."
I used the OVERRIDE command to set the id, exited the diskpart, and tried to enable reagentc again, still getting the same error. What can I do? Please help. I am using Windows 11 64-bit system
ua-cam.com/video/9h2za6semYI/v-deo.html
This video helped me fix the issue ...
For windows 11 the options are lil different...
Once u gave decryption it will take some time and after that it will work without issues...
were you able to fix this issue ?
UEFI gpt based system ...set the I'd and attributes as given in another video of urs ...still facing bit locker error ...pls help
Is the point that if you give a partition an ID of 27, reagent will find it?
As others pointed out - if your disk is GPT, then don't use id = 27, you need to use id=de94bba4-06d1-4d40-a16a-bfd50179d6ac and set the GPT attribute to 0x8000000000000001
Right
could you please elaborate? i'm struggle with this. i typed set id=27 and it said the specified type is not in the correct format
Thanks. Should it be set back to what it was originally now then winre is enabled in the partition?
I did per this, but still cannot run reagentc /enable
Even it's not working
Isn't it enough to just Disable Bitlocker?
Everything is done like u!! But in my 1Gb partion write like this Healthy (EFI SYSTEM PARTITION)
Not like u ex in ur disk management writing like this Healthy (Recovery Partition) so if it's done or not im worried pls reply!!!
Here how i did it pls read i will help u ..
I followed all his steps but unless like him my id is not 7 ... It's like 30-40 mix numbers and words
So i read this comment that actually worked .
U need to go to privacy and security then device encription and simply turn off that option and now open cmd and type reagentc /enable ..... And it worked .... I'm watching tons of video from past 2-4 days ..... Try this thing it may work for you
THANK YOU 🙏🏼
Mine type in gui what should i keep set id=
Its the guide thats working like charm ! Liked your video thank you for solving this
Is it safe to perform this change?
Thanks for the great info- solved my problem (I had the wrong type on the recovery partition). And no thanks to Microsoft for a thoroughly misleading error message!
I was still getting the bitlocker issue, but found a fix for my issue:
I deleted the recovery partition and created it again. With it still empty I bitlockered it, then immediately removed bitlocker. This seems to have cleared the bitlocker flag against that partition. I then set up the recovery partition as per remaining instructions and reagentc /enable now worked.
This is worked for me after trying absolutely everything else to no avail. Thank you!
how did you set the bitlocker and remove it?
@@o_j_edits with bit locker management console
but in my case it is still showing the same error
My Type like: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 . Can you help me to find set id?
I have the same problem too
@@adam_-de3yb same too
I'm also facing the same problem 😢
@@adam_-de3ybit was ok or not
still doesnt work
I had the same problem when trying to enable Windows RE. Unfortunately, the suggested method here did not work (deleted recovery partition and created a new one). I finally solved the issue by turning off Device encryption (from Privacy & Security -> Device encryption). Afterwards, I could enable Windows RE using REAGENTC /enable (at cmd window).
Or you can try PowerShell Commands: Disable-BitLocker -MountPoint "". For example : Disable-BitLocker -MountPoint "C:"
Thank you.
But it's giving an error saying "BitLocker drive encryption cannot be turned off on the operating system drive"
In my pc det par
Type : ebd0a0a2.............. is showing.
How to handle it ?
ua-cam.com/video/uGn7YGwmS1Y/v-deo.html
i did everything following you, same error.
hi,, pls i need help from u, i saw ur videos how good u was on these partitions and i did sub direct, cause here i have much to learn,, but the help i need is 2TB partition is unallocated and i want files back like just attach back again without losing all files,, i will turn off pc i thing turning off will not be some problem to get back that partition on another day when u have time to reply to me..
im watching so much about it but i scare i will remove all, before i deleted 500GB also like this
I want to upgrade my 1 tb HDD by 500 gb SSD . i.e. i am going to replace main hard disc by new ssd and i will put HDD in caddy. I hv listened windows 10 in old hdd ...
I have created HP recovery media usb. So i want to install fresh windows 10 on my new ssd . So don't use this HP recovery media USB to reinstall my licensed windows on the new SSD ????
same issue still here
My id is a long string of characters instead of 07 wtf
SAME FFS
how to doooo!!
what tf should i do
I swear to god man what to doooo
i went to the service centre...had to reinstall the whole os @@CrackJack1209
Samee
Why i can't set id to 27 bro
Your disk partition style is MBR or GPT?
Gpt
This all started for Windows KB444 update. Anyone else?
With all respect your method does not solve the issue.
This problem is happen when installing new system on old system partition without format and repartitions the whole disk. You need to remove the bitlocker deception then format or delete the old recovery partition and create new one if necessary.
i want to get my laptop out of all network acces i deleted all the system services that have a link to the internet but when i try to remove remote procedure call they say that my acces is denided i try every way i saw to gain acces and its impossible can you help?
Can u make video on how to disable $MFT files to shrink volume
Did you find solution
@@crux7534 no
Never seen this request before and you can't disable the Master File Table. If your MFT is bloated, I suspect what you're asking for is to "Defrag the MFT" and then "Compact the MFT" - I know Paragon HDM has these wizards offhand but I'm sure Acronis, Macrium, etc. do as well. Afaik, Windows can't do that natively
it didn't work for me.
they showed my partition type is ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
i typed set id=27, they showed "The specified type is not in the correct format. For more information on the command type: HELP SET"
then i exited and typed reagentc /enable, and they again showed RE cannot be emable on a volume with bitlocker
Hi @o_j_edits, I hope you were able to resolve the issue, but if not, user @Kirkaiya has pointed out the solution for this.
For your information, this is because your system is using a style of partition called GUID Partition Table or GPT and in the video, IT Army has a style of partition called the Master Boot Record or MRB.
SOLUTION: In your case you can create the partition using disk manager as shown in the video. and then as shown run diskpart:
Select the current drive you want the RE partition to be on.
>sel part
>set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
>gpt attributes 0x8000000000000001
it should already be formatted as NTFS if you used the wizard to create the partition, if not you can use this:
>format quick fs=ntfs label="Windows RE tools"
@@770tim thx buddy
👍
id 27 is working for me
Lifesaver
thankssssssss🎉
🙆♂️☺
thank you bro ❤🩹