i dunno why my hex isnt lit up in green....i installed my miner here 1st for a week then tried at my workplace(setup new location and paid 10$) i was mining helium even if on hotspotty i was 18000 blocs behind i was sync on the app....and then i received my 8dbi antenna so i switched back to my house paid the 10$ again and now its doing nothing....and the hex isnt lit in green but it was at 1st when i intalled it last month... im stable glass moose
I just for my BC 300 yesterday. Did all instruction and the status shows Online but doesnt show Syncing. And its been 1 day. Its alo shows this Hotspot has witnessed to beacons. Please let me know if its working or not. How to fix it? Is is because i didnt hang the antenna higher. I set up right next to window like you but i put the antenna same level with hotspot. Thank you .
Do you have your antenna outside of your window or inside? Give it a full 2 days of being online before you mess with it as well. Let me know if it's inside or out! And did you get rewarded for the 2 beacons you witnessed ?
Hey man. So I just setup my bobcat and it says sync status - syncing and network status - relayed in my bobber app. And i tried port forwarding and DHCP Static IP reservation but the port simply won't open up for me. I think it's because of the ISP. I tried all the other options(disabled router firewall, toggle UPnP and DMZ) as well and the port simply won't open up. Can I rely on this "light hotspot update"? How do I get that shit so it fixes itself?
@@happyeggfamily I didn't really do that. I tried setting it up last night but it showed some error while registering it so I let it sit overnight. The light went green almost immediately when I plugged it in for the first time. And I tried again today and it registered fine and showed up on the hotspot map in my hex. Actually, its up and running atm. I set it up 2 hours ago, on the hotspot map it says registered to block chain and status active in my hex. It also witnessed a beacon and earned 0.01 HNT. On the bobber app webdashboard it shows syncing and relayed
@@spchetan11 I would definitely let it sit for 48 hours before doing anything. I had done portforwarding and all that as well, the real culprit was that I didn't wait long enough for it to fully sync.😁
@@spchetan11 I have both still running. I’ve made a bit of an attempt to port forward with the Verizon home internet router but that didn’t work (probably didn’t do it properly). However it’s getting rewards and some success just the same. I have several HNT now
How long have you waited since plugging it in and just letting it sit? Mine took 48 hours on initial startup, which I had to restart many times because I didn't wait haha
@@whitebelt2905 so now you wait for a transaction or data to be sent! Depending on your setup, could be very quick or slow. I'm in a 4 story apartment with a good outlook of the whole city so I get data and transactions every 1-2 hours
@@happyeggfamily thank you, I didn't know that we could check out other helium miners income. I'm still waiting for my Bobcat Miner to be delivered any day soon. Wish you good luck and all the best!
@@V3N8MOUS Yes make sure to watch the video again I explain about downloading the helium app which is where you can search other miners! I'll post some update videos here soon(:
Hi cool video so I was wanting to do this what is step one download hnt wallet? I don’t own any yet but I been wanting to do looks easy enough I was thinking might be crazy complicated ,,
Yes, if you could do that other video on how you got your helium to synch up that would be great! Mind isn’t synching. I keep getting a message “Helium hotspot miner is waiting to synch. Please try again in a few minutes”.
Hey Elizabeth! I waited almost 48 hours the first time I set it up to fully sync. Has it been that long? Also where are you getting this error message from?
Yes about 50 cents to a dollar a day at its current price. I'll be running this miner until it stops working so it should theoretically be making money forever regardless of the amount (:
they state when buying it that it can take more than 20+ weeks. Or you can buy it in-hand on eBay for 900+ dollars. I've been making great rewards on it, so I actually recommend everyone to buy it lol.
how much hnt give me this machine with 8dbi antenna per day
Yep got my notice today it was shipped can’t wait
LFG😶🌫️😶🌫️
i dunno why my hex isnt lit up in green....i installed my miner here 1st for a week then tried at my workplace(setup new location and paid 10$) i was mining helium even if on hotspotty i was 18000 blocs behind i was sync on the app....and then i received my 8dbi antenna so i switched back to my house paid the 10$ again and now its doing nothing....and the hex isnt lit in green but it was at 1st when i intalled it last month...
im stable glass moose
Thank you so much for your video. I just my bc3C the other day, so fingers crossed.
Of course man ! Let me know if you have any trouble or questions. Be glad to help!(:
I just received my 2 bc300 yesterday and I'm preparing to join the network also. Good 🤞 luck
Hopefully see you on soon! Let me know if you have any questions.
Mine came in today. No idea where to start! 😂
Is it still worth installing this mod?
I just for my BC 300 yesterday. Did all instruction and the status shows Online but doesnt show Syncing. And its been 1 day. Its alo shows this Hotspot has witnessed to beacons. Please let me know if its working or not. How to fix it? Is is because i didnt hang the antenna higher. I set up right next to window like you but i put the antenna same level with hotspot. Thank you .
Do you have your antenna outside of your window or inside? Give it a full 2 days of being online before you mess with it as well. Let me know if it's inside or out! And did you get rewarded for the 2 beacons you witnessed ?
Hey man. So I just setup my bobcat and it says sync status - syncing and network status - relayed in my bobber app. And i tried port forwarding and DHCP Static IP reservation but the port simply won't open up for me. I think it's because of the ISP. I tried all the other options(disabled router firewall, toggle UPnP and DMZ) as well and the port simply won't open up. Can I rely on this "light hotspot update"? How do I get that shit so it fixes itself?
Have you let your Hotspot sit for a full 48 hours without touching it or restarting it or anything of that sort?
@@happyeggfamily I didn't really do that. I tried setting it up last night but it showed some error while registering it so I let it sit overnight. The light went green almost immediately when I plugged it in for the first time. And I tried again today and it registered fine and showed up on the hotspot map in my hex. Actually, its up and running atm. I set it up 2 hours ago, on the hotspot map it says registered to block chain and status active in my hex. It also witnessed a beacon and earned 0.01 HNT. On the bobber app webdashboard it shows syncing and relayed
Quick update. It says 'Synced' and 'Relayed' now
@@spchetan11 I would definitely let it sit for 48 hours before doing anything. I had done portforwarding and all that as well, the real culprit was that I didn't wait long enough for it to fully sync.😁
@@happyeggfamily Hmmm.. But mine says it's Synced. But it's relayed now. What do you suggest? Do I reset it?
I have had 2 bobcat miners for 9 months...just recieved 3 more,do u still need to do the portforwarding ? And so on
You shouldn't need to with the new light Hotspot Update!
@@happyeggfamily Brilliant thank u.
Curious about this. Mine is fully synced but it still says “relayed”. Is this PF thing still a thing?
@@tna2me197 Any updated regarding this?
@@spchetan11 I have both still running. I’ve made a bit of an attempt to port forward with the Verizon home internet router but that didn’t work (probably didn’t do it properly). However it’s getting rewards and some success just the same. I have several HNT now
how much are you making with the price that helium is at atm
I couldn’t get mine to pair
How long have you waited since plugging it in and just letting it sit? Mine took 48 hours on initial startup, which I had to restart many times because I didn't wait haha
@@happyeggfamily you were right! It’s working after 24 hrs. But it’s not mining yet. Is that normal?
@@whitebelt2905 so now you wait for a transaction or data to be sent! Depending on your setup, could be very quick or slow. I'm in a 4 story apartment with a good outlook of the whole city so I get data and transactions every 1-2 hours
How much helium are you mining per day? Please advise
Before the Light Hotspot Update I was making .5 HELIUM a day or about 5-6 dollars. But they are having issues with the update I'm getting .1-.2
@@happyeggfamily and how long have you had this bobcat miner for?
@@V3N8MOUS about a month exactly. My miner name is "Cool Chambray Opossum". You can check me out on the helium app to see my earnings as well!
@@happyeggfamily thank you, I didn't know that we could check out other helium miners income. I'm still waiting for my Bobcat Miner to be delivered any day soon. Wish you good luck and all the best!
@@V3N8MOUS Yes make sure to watch the video again I explain about downloading the helium app which is where you can search other miners! I'll post some update videos here soon(:
I think its better if you make sure your antenna is straigth up, instead of angled a bit forward 😊 signal will reach further then.
I couldn't do straight up as my windowsill is curved.. but I'm moving today to a new place going to do some update videos their !
Hi cool video so I was wanting to do this what is step one download hnt wallet? I don’t own any yet but I been wanting to do looks easy enough I was thinking might be crazy complicated ,,
It's super easy! Yeah you can download the app, and once you get the bobcat just follow my video it's super simple! And just plug it in and set it up!
Yes, if you could do that other video on how you got your helium to synch up that would be great! Mind isn’t synching. I keep getting a message “Helium hotspot miner is waiting to synch. Please try again in a few minutes”.
Hey Elizabeth! I waited almost 48 hours the first time I set it up to fully sync. Has it been that long? Also where are you getting this error message from?
Hey Elizabeth! That's what it says for me too. :( Has the problem been solved? What did you do?
Yes my issue seems to have resolved and it did take 48 hrs.
@Elizabeth Stein Thank you. I am waiting patiently. :) I am writing from Hungary. 🇭🇺
@@attilakarl let us know if yours synced and how it's going!
Like you I waited 7 months, arrrrrrrg. Thanks for the video. So the big question, are you still making money???
Yes about 50 cents to a dollar a day at its current price. I'll be running this miner until it stops working so it should theoretically be making money forever regardless of the amount (:
I have a bobcat miner 300. that I want to sell if someone wants to connect me.
Need more just got mine
Are you having any issues ? Let me know so I can address them (: thanks for watching!
Eu tenho um bobcat miner 300. Que eu quero vender se alguém quiser me conectar.
Bobcat company has major delivery issues dont buy it
they state when buying it that it can take more than 20+ weeks. Or you can buy it in-hand on eBay for 900+ dollars. I've been making great rewards on it, so I actually recommend everyone to buy it lol.
@@happyeggfamily I do hope your not wrong, but waiting way longer than 20 weeks
@@happyeggfamily ok my miner arrived
@@jenniferlittle1905 woohoo! Make sure to follow the video closely and let me know if you have any questions. HAPPY MINING *:)