CNC basics - Beginners guide and tips and tricks for successful woodworking projects and setup
Вставка
- Опубліковано 8 лип 2024
- #cnc #tools #lifestyle #howto #diy
Amana Tool 6.2 Deg Tapered Ball Tip - amzn.to/3jgnval
SpeTool extra long 1/8" bit - amzn.to/3WzFozh
1/2" double flute 1/4 shank - amzn.to/3PHAWwg
Timestamps:
0:00 Introduction
1:26 Make a sturdy base
1:55 Square your machine
3:35 Wasteboards
5:13 Reference Lines
6:22 Hold down work pieces
9:45 Homing the machine?
12:05 Home Position
12:40 Bits to have
14:25 Z probing
16:48 Software
17:23 Have a process!
My IG page: / maxharvard
Check out the 3 books I've written!
4L80E Rebuilds - amzn.to/3hVsjOS
LT1 Performance book: amzn.to/2Fuip2n
LS Swap book: amzn.to/2BPv0NJ - Авто та транспорт
Process. Thanks. 😊
You're welcome!
Thanks Mate I learnt a lot. Need some help with Vcarve you able to help me out?
No need to buy these stl files (for the clamps) they are free to get from Marius Hornberger, who has a few video's on these things kind regards Hans
Yessir. Get the updated version though
process. Thanks, enjoyed the video. Machine you have looks 48 x 32, yes? Any regret on size? Too much / too little capacity?
You always wish you had gone bigger! This was the biggest at the time i could get.
@@GearheadDaily LOL! Ain't that the truth!
Nice video but the promised chapters to scroll through would have been actually nice you know...
You are 100% correct. I've looked into it and i've been able to add chapter before but for some reason this video won't let me. I'll try again.
@@GearheadDaily Oh okay so it's a technical issue! Thanks for trying again, but if it does not work I think a clarification in the description like "chapters no work, sorry" is more than enough for stuff like this, don't break your head over it
@@uncannysnake yessir I'll try agian
@@GearheadDaily Very much appreciated mate, thank you!
@@uncannysnake Thanks for the reminder, i think i got it fixed now. See if it worked.