JENS BOGREN Signature IR PACK - Rhythm
Вставка
- Опубліковано 1 лип 2024
- 27 killer sounding impulse responses for metal rhythm tones that are EQ'd, mic'd & mixed to fit a dense mix. I hope you find this interesting & informative. Cheers!
Use my affiliate link to get a discount from Bogren Digital IR pack
(55% now for Black Friday, 15% outside of sale time):
bogrendigital.com/?ref=Z9Abn2...
The original footage of the EV intro clip was shot by Dennis Henson and KJ Melgoza. Thanks guys!
The song on the clip is 'Feed The Fire' from my solo album 'Easy Does It': spoti.fi/2S3owRZ
The gear used:
- ESP Japan Custom Shop Euge Signature "GP #1"
- BOSS SD-1 Super Overdrive: bit.ly/3fqNDsT
- ISP Decimator: bit.ly/2W9LB8S
- Marshall JCM800 2203: bit.ly/2QLPPR2
- SUHR Reactive Load IR: bit.ly/3cxhEpj
- Tokai Precision bass: bit.ly/2zPbphU
- JST Tones Bassforge Rex Brown: bit.ly/2zdNb0K
- Focusrite Scarlett 2i2: bit.ly/36dC5oF
- Logic Pro X: apple.co/2WL4AGS
- Jens Bogren IR pack: bogrendigital.com/?ref=Z9Abn2...
- Ownhammer Marshall 1960B w/ V30's IR: bit.ly/2ALQOvl
- Addictive Drums 2: bit.ly/2zVMs45
Musamaailma: www.musamaailma.fi/
Bogren Digital: bogrendigital.com/?ref=Z9Abn2...
You can follow me also on:
/ eugeofficial
/ euge230v
/ euge230v
cyhra.com/
Check out our new album 'No Halos In Hell': media.nuclearblast.de/shoplan...
#EugeValovirta #JensBogren #IRpack
I have been telling people for ages NOT to listen guitar(s) alone because they would be too dark and mid heavy for the mix, especially when you quad track them.. That was great observation and extremely useful, cheers!
Indeed! Thanks! \m/
Isn't it the other way around? A scooped guitar tone sounds more impactful and exciting alone but a mid-focused (and darker in solo) guitar tone is heard better in a full mix? I'm new to this and confused by the varying opinions.
I’m having the same problem, and that brought me here ;-) I’ll try it, Thank you guys!😎
@@GaijinMo not even close…. You don’t need NEAR the midrange you think you do. Guitars in metal these days have PLENTY of midrange in their setups. Let’s take a look at a typical setup: 5150( tons of midrange) with an 808 boost ( more midrange) into a Mesa recto cab with V30s ( big mid spike) mic’d with a 57 ( mid focused)… the last thing you need to do is “boost your midrange”. Mixing is much different than playing live. And also, most guitars are far far FAR too dark to be applied to a modern metal mix. You’d be surprised to hear just how much high end solo’d guitars have that are in a heavy modern mix. There’s tons of UA-cam examples of solo’d guitars that show this. Listen to slipknots psychosocial solo’d guitars here on UA-cam. Bet you didn’t think they had that much high end.
Great and informative video, thank you! I am in the process of checking out different IR's and these are definitely going to be checked out!
Thanks Daddy-O! 😎. Yeah they are great!
After I watched this and your Mooer 005 video I just needed to try these excellent IR with the Mooer Radar and the micro 005. Sounds insanely good when recording. It's crazy when the total cost is around 250 euro or something for these three units. Keep up the good work with this channel and hyvää kiitos! 🤘🍻
Cool! Indeed 🔥👍. Thanks and ole hyvä! 🤘😎
4:32 marshall
3:00 bogren
5:11 bogren solo
7:04 marshall solo
Bought this pack today. Sounds sick I must say! Tried them with Kemper and also with pedalboard, tube amp, loadbox, daw combo. Works nicely with everything. Kiitti Euge hyvästä videosta!
Cool! Nasta kuulla! 🙏
Sounds great !!
They do indeed 💪
@@EugeValovirta230V Bought the Ir pack right after watching your video. Thanks for helping making it easy to choose.
Oh great! Glad to hear!
I think I would start with this pack first. Great Demo.
Good choise 👌. Thanks!
Very helpful video and great tones as usual!
I’ve bought this pack and I think it’s great, the guitars sound unbelievably full when tracking.
How do you use those IR’s in a live show situation?
Any little tweak on lows & highs?
Thanks!
I don’t use amps, cabs / loads but just this: ua-cam.com/video/B0A6s9M-fPQ/v-deo.html
Do you know of any old school death metal impulses? I know theres trvecab but id like to load some into my helix
Not unfortunately but these work on everything IMO and I use these from country to metal 👌.
And it’s more about what & how one plays anyway than the gear. Well mostly anyways 😎. Throw a BOSS HM-2 first in the signal chain and everything sounds old school death metal 😊.
so you payed your marshall through the IR?
wish I could hear a clean guitar through this with a Amp sim, neural DSP Nameless etc
Hello Euge, sorry for bothering you with my stupidity, but I could need some help. I am trying to load the Bogren IR´s onto the Suhr RL IR like you are using them. I haven´t loaded any third party IR´s onto the Suhr before. I have followed (several times now) like it says in the manual, choosing the 24 bit 48 kHz IR´s, dragging them each into the before cleaned up folders, pressing "eject" for the Suhr RL on the computer, then disconnecting the USB cable and then disonnecting the power cable for about 3 seconds. But when I try the Suhr the with my amp then, I only hear the direct nasty amp signal then on those spot where the new installed Bogren IR´s would supposed to be then. When I connect the Suhr back again to the computer, all the Bogren IR´s can still be seen where I put them inside the folders, but they are not functioning when I play through them. Any idea what my mistake might be? Any help would be much appreciated! Thanks! :)
Not at all man! I had the same experience 😁. Just send an email to Bogren (I believe it’s on their website) and they’ll send you versions that works with the Suhr 😎👌.
@@EugeValovirta230V Aaah okay, that was indeed extremely helpful, thank you a lot my friend!! :)
You’re welcome! 👌
I`m interested in those IR`s but not sure if I want to pick`em, I already have like a 1000 Ir`s free and (Redwire, Ownhammer, etc) paid and haven`t yet to find "that" tone (s). Bogren says his collection is different for that matter but what could possibly be different in Ir`s... not bad tone here though, you play tight, kick and snare are too loud in my monitors though, they push guitars to background imho
They’re great! Kinda like EQ:d to fit in the mix. I’ve been using basically ”Sound of God EQ2” on everything lately: rhythms, leads & cleans. Just recorded an album and used a few different amps but only that one IR. The first single coming out next month. Strong recommendation for that pack 🤘👍.
@@EugeValovirta230V oh, so they`re mixed ready and no need to EQ, that`s cool. I`ll definitely check them, thanks! There are other instruments waiting for me to Eq them lol
😊👍. I’ve only used a bit low pass filter every now & then if I’ve felt that there’s too much ”high freq air” but other than that nothing else.
@@EugeValovirta230V I also bought that pack and it is the best from all of my IRs! Thanks for recommendations!
Glad to hear!
HiMan , which one is yours favs with Jens IR Pack?
SoundOfGod EQ2 & GreasyBeard EQ1 👌.
@@EugeValovirta230V Thanks🤘🤘🤘
I´m looking for some 80´s traditional metal style IR´s, can you recommend any?
Sure! Here's a few I've been using:
- Ownhammer Heavy Hitters Collection 1:
www.ownhammer.com/store/index.php?main_page=product_info&cPath=183&products_id=382
There's four cabs, each with 3 different speaker options, so you get sounds / IRs for all kinds of styles from a bit more vintage to a really tight metal.
- Ownhammer (r)Evolution Series 412 MRCB - 1970's Marshall 4x12 with a Celestion V30 speakers:
www.ownhammer.com/store/index.php?main_page=product_info&cPath=192_201&products_id=455
This is the one I've been probably using the most. Suits for everything 'cos it's a classic combination being used in rock / metal.
ML Sound Lab's Hair Metal pack:
ml-sound-lab.com/collections/frontpage/products/mars-hair-metal-cab-pack
This can be a bit scooped and "muddy" ('cos of the G12-T75 speakers) but suits well with a bright amp and the name is pretty self explanatory :-)
I haven't tried this one but should work really well for what you're looking for:
ml-sound-lab.com/collections/frontpage/products/cab-pack-for-destruction
Classic Marshall with V30's
Thank´s a lot, Euge!
Can we use Jen's IR on Cab sim pedal?
I guess it depends on the pedal?
@@EugeValovirta230V - Yeah the pedal does.
Ok! Then just upload the IRs to the pedal 😎👌.
@@EugeValovirta230V - Perfect! Thank you for your time today 😊
👌🤘☺️
Oh... IR's sounds great but... there is no miracle( One more point to experience that i've bought for the 66euros.
I know how that's sound, but it is non-sweet true, your still need a lot of good stuff for all rest of your sound chain
Good playing mostly, an amp & a reactive load and off you go 👌😎.