Спасибо за видео! Но добавлю от себя! Если у вас перестал вращаться выходной вал, но мотор работает, то это срезало шплинт на паре шестерня-червяк. В принципе, можно даже без разборки корпуса вставить новый 3мм шплинт. Главное - найти то место, где он вставляется. А доступ к месту, появляется, если снять большой мотор. Мотор снимается очень легко - надо открутить лишь две гаечки на торце, где крыльчатка. Кстати, можно и не снимать крыльчатку, а демонтировать весь мотор и после всех манипуляций, опять его поставить.
Hi Chris, Thanks for the kind comment. Good luck with yours. The way I see it, anything designed to be left stored in a field for years - the caravan chassis etc and the mover - has to be basic, rigid engineering or it wouldn't last 5 minutes!
Hi Mark, I looked around for bellows of a similar size for a different application then tried to narrow it down to the exact size. For instance: bicycle suspension bellows. I never did find anything the right size because I gave up when I realized the bellows are compressed and covering the threads when travelling anyway. I reckon that Truma like any manufacturer, would try to use standard size parts where ever they could and I would be surprised to find they have these bellows made to a specific size. If only someone could find a source (probably China) we could probably get them via Ebay. Good luck and if you find a source please let us know. 😎
Super fin gennemgang. Jeg skal til at ordne min mover for første gang. Godt lige at se hvordan det hele er skruet sammen, før man går i gang selv. Jeg kan ikke engang få plastik coveret af. 😂
Спасибо за видео! Но добавлю от себя! Если у вас перестал вращаться выходной вал, но мотор работает, то это срезало шплинт на паре шестерня-червяк. В принципе, можно даже без разборки корпуса вставить новый 3мм шплинт. Главное - найти то место, где он вставляется. А доступ к месту, появляется, если снять большой мотор. Мотор снимается очень легко - надо открутить лишь две гаечки на торце, где крыльчатка. Кстати, можно и не снимать крыльчатку, а демонтировать весь мотор и после всех манипуляций, опять его поставить.
Great video...I'm gonna take a look at mine even though its a manual powertouch mover...its making hum noise but not turning....?
Hi Chris, Thanks for the kind comment. Good luck with yours. The way I see it, anything designed to be left stored in a field for years - the caravan chassis etc and the mover - has to be basic, rigid engineering or it wouldn't last 5 minutes!
Brilliant video, helped me out so much. Well filmed and with charisma.
Thanks Bob, that's the first time I've ever been accused of having charisma! 🤣
Great to be of help. For me it's what UA-cam is for.
Realy good! It will help me a lot tomorrow.
Great video, I need to replace the bellows on both sides. Can you tell me where you got a bellow for £40ish , a spare I have found is £51 a piece!!😮😮
Hi Mark, I looked around for bellows of a similar size for a different application then tried to narrow it down to the exact size. For instance: bicycle suspension bellows. I never did find anything the right size because I gave up when I realized the bellows are compressed and covering the threads when travelling anyway.
I reckon that Truma like any manufacturer, would try to use standard size parts where ever they could and I would be surprised to find they have these bellows made to a specific size. If only someone could find a source (probably China) we could probably get them via Ebay. Good luck and if you find a source please let us know. 😎
Great Video will definately make my job easier Thank You and Well done
Super fin gennemgang. Jeg skal til at ordne min mover for første gang.
Godt lige at se hvordan det hele er skruet sammen, før man går i gang selv.
Jeg kan ikke engang få plastik coveret af. 😂
Tak for kommentaren. Held og lykke.😊