Spaghetti bridge contest 2010 TU Delft - Team RVS
Вставка
- Опубліковано 22 сер 2024
- Spaghettibruggenbouwwedstrijd 2010 op de TU Delft. Team RVS won de 2e prijs bij de studentenwedstrijd met 38.8 kg, 45 x zijn eigen gewicht. Onze lijmsponsor is BISON International.
Spaghetti bridge contest 2010 at the TU Delft. Team RVS won the second prize in the student competition with 38.8 kg, 45 times it's own weight. Our adhesive is sponsored by BISON International.
![CONCURSO SPAGHETTI BRIDGE 2019 en UAH - Concurso Puente de Espaguetis [Real Poly Bridge 😀]](http://i.ytimg.com/vi/SIqtGDYTJSA/mqdefault.jpg)
ขอบคุณครับ เป็นการทดลองที่เป็นความจริงที่คนนอกห้องเรียนยอมรับว่าโครงถักแบบทรัสรับน้ำหนักได้มาก และขึ้นอยู่กับวัสดุที่จะนำมาใช้ เช่นไม้และเหล็กมีคุณลักษณะไม่เหมือนกัน การรับแรงย่อมต่างกัน...
"U hebt de tweede prijs in een spaghettibruggenbouwwedstrijd gewonnen en ontvangt 700 euro"
An English subtitles is now available!
@cellophaan Zowel de foto's als de film is eigen beeldmateriaal! Maar we hebben het bezwijken van bijna alle bruggen gefilmd.
Desde Colombia. Por esperiecia enpirica le digo SOS bueno con las estructuras de puentes
@DanFrederiksen All spaghetti rods are glued together. The tubes are hollow to save weight and the connections are massive.
Student did not make the road structure very supported at the edge. This was a roof truss roughly made to look like a bridge.
Beautiful bridge and near perfect form...great job! I predicted shear failure at the end--just too narrow. Bet it could have held 50% more otherwise. Re the above note though, carrying the conversion to .9003847 is meaningless. You can't weigh a dust particle to that precision! 1.9 lbs is close enough. ;-)
You can make all models you now ....................................... but the maximum force is in the first diagonal near the foot.Ever colaps are similars. Ft/ndiagonalsx sen45 = force in the diagonal; 460Kgf/cm2=f/area; area = ......x, find the Moment inercia.
was it glued together?
Just over 85 lbs , a remarkable achievement !
what type of bridge is this? If truss, then what type of truss
you're right! 1.9 lbs is close enough... it was just google calculator that gives that answer. It was not just shear failure, the end of the bar buckles due to the compression force in that bar.
@kleinernilsliebhaber the widt of the bridge is 1 meter and the angle is about 30 degrees
@DanFrederiksen The tensile forces are absorbed by the glue in the joints.
couldn't spaghetti be used as glue?
@B3N1GMA It's a truss bridge. But specially build for one point load.
@harleygaray We didn't use any type of treatment. We just used regular spaghetti from the supermarket.
@DanFrederiksen There was only spaghetti and glue allowed, so epoxy glue was the best option. Without using glue you can never make a strong bridge.
@msHLC96 the weight of the bridge was 862 g (1.9003847 pounds)
@DanFrederiksen The epoxy is much stronger than the spaghetti so we want to use glue instead of cooked spaghetti.
@rpearce14 it's failure load was 38.8 kilograms = 85.5393577 pounds
How many kilogram Spaghetti did you use all in all?
How much did it hold
force in the worst diagonal = (fvA - force diagonal)x sen 45 ; fvA=fvB = ft/2; after find the area minimum, tesc flambagem
Hello, does anybody can explain me how to make the connections between the legs?
@zocker057 probably you can use thinner tubes to reduce the weight of spaghetti.
Tof! Ik had me destijds niet gerealiseerd dat jullie ook bij de teambouw de tweede prijs hadden gepakt.
Is dat het beeldmateriaal dat de organisatie had gemaakt, of hebben jullie het zelf gefilmd?
how much did your bridge weigh?
@rowisj I ask because we have to build at school in grupos also a Spaghetti bridge
and the group where I am think that your bridge is a real good one.But we have only 0,500 kg spaghetti we are allowed to use
@msHLC96 You can use a truss bridge (see the 4th picture in google images). The best shape is to use a triangle, a little bit like our bridge in the movie, but than with single spaghetti truss members.
@addi1403 The span of the bridge is 1 meter
@sn0wD Ja... 45 keer z'n eigen gewicht en goed voor een 2e plaats. Dus best veel!
how much spagetti did u use
@zocker057 We used 0.8528 kg spaghetti.
@rowisj if the spaghetti is strong then why in joints too..
38 kg is neem ik aan best veel?
how the heck did you build that thing
okay, so in my physics class we have to make a bridge out of any type of pasta and glue but the requirements are it must be longer than 12 inches, no heavier than 100 grams, and has to be able to withstand the weight of a bucket full of water hanging from it. Any advice?? Pleeease. :)
@rowisj why not..
Hello!! I'd like to get more information about this project of yours... because I'm quite interesed in doing my own Spaghetti Structure. Can you answer me these questions?: Which is the lenght of the structure? Which spaghetti type did you use? (Eg. Penne, Rigatonni, etc) Any advices?
wtfuuu 38 kilo
which glue you used for that oversized construction
epoxy glue
breaks at 3:00
We used 0.8528 kg spaghetti.
@rowisj alright cool I'll try it, thank you :)
Which kind of glue did you use?
We used epoxy glue.
Maybe this could be your next challenge: 'Imtech promotes GreenTalent', a GreenTech ideas contest for a more sustainable world. As an ambassador I would like to invite you all to join! For more information check out the Imtech website.
38 kilos is 85 pounds
say wat? mabey next time in english!
@rowisj sig figs dude...
cu
.