Thank you for this video. You are a patient person! I was hoping I could do this myself. Sadly, no. Who thought this design was a good idea? It would be simpler just to buy a new car!
My 2013 Ford escape went for $30,000 it was a woman that designed the 2013 Ford escape. Without any thoughts on how to change a bulb with a burnout it's absolutely ridiculous.
I agree. Ford has made the process to change bulbs is like you said a major PITA. Must be a money maker for them but even my favourite mechanic shop does t want to do it.
Yeah, it’s definitely that car that will sit in the shop for hours for such little maintenance work such as a bulb…. I was looking at the placement of the alternator and it’s horribly located in a difficult to access location
My wife changed the driver's turn signal with my guidance in about 3 min. Her small arm was able to reach it from inside the engine bay which was so nice after seeing how most are doing it. So, in short, get yourself a wife with thin arms and have a lifetime of free turn signal changes.
I just had to pull this bulb for the second time. First time I had scratches almost to my shoulder this time I looked a little deeper and figured out that only 3 screws hold the black box in place. 2 in front and one in back that can be reached with a 1/4 drive ratchet/8 MM socket then the box will swing right out of the way leaving the turn signal in plain sight and easily reachable. Much easier that way.
What is that black box? I dove into the driver's side today, ran into that box and wasn't sure what to do. I can not get to the turn signal unless I remove it. I am trying to switch all of those bulbs out to LED and I managed to pull a wire off of the fog light. Now I have to take that box off for sure.
This can be done without pulling the entire inner fender out. After you take out the 7mm flange screws, you can muscle the inner fender in a bit and insert your other arm to unplug and take out the bulb. You'll have to do it by feel, but it keeps you from having to take the whole inner fender/wheel off. Also, use your finger strength, otherwise your forearm flexes in the gap. The factory bulb is a 2827, which is higher wattage and twice the price of the standard 194NA bulb, but much brighter.
I did mine on the passenger side wasnt too bad. I jacked up the car, removed the wheel and the wheel splash cover. Also if you take the under engine cover down you can fit two hands in. This makes a big difference to hold on the socket with one hand while to change the bulb with the other. While the car is jacked up and splash cover down you might as well change the oil. Don't you love Fords?
I just went through this nightmare myself yesterday. The passenger side is much easier to do than the drivers side, as on the drivers side, the ECM box is in the way blocking most of the access unless youve got really skinny, long arms. Passenger side is super easy once you squeeze your hand up in front of the windshield washer reservoir. Left side: I think I developed Tourette’s Syndrome and peeled off the first 5 layers of skin off my arm trying to accomplish it.
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
Joe Barbieri I feel you brother. a lot of new vehicles you pretty much have to pull the bumper cover to replace bulbs and lights. more money for the stealership.
Just did this job. Required someone else with thinner arms to get the bulb in and socket back in place. I won't do it again. Shame on Ford for making this such an ordeal.
Funny. I’m watching this video again thinking I had never watched it. 2 min into the video I’m thinking, “I’d rather sell the car than try to change the parking light myself.” 😄
Hi everyone, 29 November, 2021 - on driver side, I was able to successfully replace bulb without wheel removal or splash guards, etc. i removed the airbox and was able to reach right down into the cavity next to radiator to reach the bulbs . You can see the turn signal and fog light bulb assembly from above where it inserts into lens area. Give it a try with high intensity light. I took me about 10 minutes to manipulate the bulb into the socket, but saved time on everything else. Good luck! -Will take a look for options on left side and comment if successful.
On Dec 12, 2021 - my son's 2013 Ford escape was hit by drunk driver at intersection after that driver ran a red light. sorry - car total loss and fortunate that nobody was hurt other than a few bumps.
@@alexanderhelton On Dec 12, 2021 - my son's 2013 Ford escape was hit by drunk driver at intersection after that driver ran a red light. sorry - car total loss and fortunate that nobody was hurt other than a few bumps. sorry i had no update.
You rock man. Just got the driver side bulb out using your method. Was already under the hood to change the battery and got to thinking about replacing the burnt out turn signal bulb and saw your comment. Huge thanks for the tip.
Absolute nightmare to do. I tried taking off the screws referenced in the video and it's not enough to reach the turn signal housing. You'd need to remove the bottom lower fender to reach that housing. Moronic design for the express purpose of making customers do it during a Ford service. Changing a safety turn signal bulk should be 10 minutes as it is on the rear. This is now officially my last Ford car I'll ever buy.
There probably all the same now a days they want you to have to go to the dealer where they can charge you some outrages man hour rate to change a what used to be a 50 cent bulb now I am afraid to ask
Are you sure they are the same bulb? I bought them, but most people are saying they are 1787 bulbs not sure if they are the same. Just wanted to check if you changed the front ones.
I have done this twice already. By advice, do all the bulbs at the same time, and swap to LED so you don't have to do them so often. Changing a couple of directional bulbs should not take an hour.
Ok guys. Just had my learning curve on this one. My tech and I figured out it takes 5 minutes to pull the air box out and you can reach right down and change it. Also you can see everything your doing. Total tome start to finish is about 15 minutes max. Hope this helps.
Gonna be doing this in a couple days. I was just thinking "there has to be another way". lol. Do you have room to reach both sides doing this or will I have to muscle the right splash guard to do that side?
Edit: my vehicle is a 2015 .it is hollow behind the trim piece i stated. However i was informed by someone who tried with a 2014 (in my reply comments) and it didn't work for theirs because it was solid behind it. So if your vehicle is solid behind i apologize it definitely won't work for you. OK so I know this video is old . However on the front of the ford escape above the light is a black trim piece. You can safely pop that off with a skinny flat head and you will have access to the blinker bulb/turn signal bulb which ever you call it . Takes less time and definitely less of a headache. Idk why he did it this way.
I got my 2014 Escape a few months ago, and I've been wondering if this trim piece could be removed to access the fog lamp assemblies. One of my fog lamps burnt-out a couple of days ago (first one since purchasing the vehicle), so I'm going to give it a try tomorrow. Thanks @Summer Collett 🙂
Update: Not sure if all Escapes are the same, but I tried this on my 2014 Escape Titanium this morning and behind the trim is piece is solid bumper. No access to the fog lamp assemblies. Not to mention the little tabs on the trim piece are super thin and brittle, so a few snapped with the tiniest bit of pressure. I'll have to order a new trim piece now, but oh well. Now I know.
@@summercollett485 No worries. I wouldn't have known until I tried. Looking at it, I could probably cut a small access in the panel behind the trim piece just big enough to sneak a hand in. But that'll be another job for another day (and after more thought).
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
For me is the low beams headlight in my 2015 Ford Escape. I rather had it done at Ford for the running lights. I just had my fog lights replaced. I still need a light bulb for my running light for the blinker. It drives me nuts on it hearing the clicking clicked fast.
Don't go through the wheel well. Take out the airbox. I just did this on my car and it took 20 minutes and was easy with only an 8mm socket. This worked for the drivers side, passenger side may be different.
Evan M I know I’m 2 years late, but to be quite honest, the best way to do it is take the whole bumper off, if you don’t want to be on the floor struggling in weird angles. It’s not hard to take off a bumper imo.
2015 Ford Escape(No black box in mine) When you have a warped tire that ate through the fender wall but nothing else so you can stick your hand in there, and grab it because you have long arms.No tools required! 😆
Thanks for this video! I bought the car with some damage to the drivers side.(headlight/bumper cover/signal not working) I helped my buddy for 2 hours to find out it wasn’t the bulb. I will need to buy a part. I just had a question for you: what is the grey coloured “connector”piece that leads from wire attached to the socket holding the turn bulb? Its cracked and disconnected and I would like to purchase one but don’t know what it’s called. Thanks in advance!
I recently had to replace the battery on my 2014 escape. Although it was doable it was equally involved with removing other parts to get to the battery. Ford engineers have done a wonderful job designing the car so that you need to take it to a dealership were labour charges will be ridiculous because of time to do the repair. Total win for Ford total loss for the customer
Is there a trick to getting the bulb out of the housing? My right side is out. I can get the bulb assembly out of the lens area, but can't unclip the bulb with one hand. I can't quite reach with two hands. I haven't tried taking off the wheel, since I don't have a paved driveway and don't trust the jack stand on gravel.
There seems to be a lag in the turn signals on the 2013-2019 Escapes. They illuminate rather slow compared to normal turn signals found in cars like GM, Honda, Toyota, etc
For the left one I just removed the air filter box and you can access it that way. 10 min. i uploaded a video of it. 2013 escape easy front left signal light replace
If you arm is small enough, you can reach in from the top and change the bulb with one hand. My wife just did it. You don’t have to remove anything. It’s not easy though
Going price from the dealership to do this is over $100, they said it took them over an hr to do this. They also said they gave us a deal for changing the bulb.
willijnm should only take maybe 1/2 hour if you know what's involved. personally I think it's crap to go through that much work to change a bulb. This is easy through, try changing a headlight bulb on an late model Audi. usually have to pull the bumper cover.
Wtf? I found this video after realizing I had already removed too many things but Jesus, I’m putting everything back, got to have my break pads replaced soon anyway so I’ll try replacing the damn bulb then
It’s the wife’s Escape, and if you think the turn signal bulb replacement sucks. Wait till you have to replace the battery. Ya all but have to remove the windshield. My 2008 Acadia is the same BS to replace the headlights. Pull tire, pull splash guard and blindly reach.
How do you even take the bulb out? Probably the easiest part but i haven't found one video of that. Pull it straight out once it's been removed but isn't there something holding it in?
But, you didn't show how to get the bulb out of the socket. I can't get both hands on it and I don't want to break it. I just need to know how it is attached.
Don't listen to this... I just did mine... come from the front. Like your trying to change the oil ... and reach for it... and do it from that way... 5 minutes instead of 30 to 45 minutes....
I tried this last week on my daughter's 2013 on teh driver's side but i can't get past the black module there and have no idea what it is so I can't look to remove it. I will try the airbox route this weekend.
That’s Also a horrible location for the brain box of the car to be right next to the tire and where water comes in horrible design , just remove engine splash guard no need to remove tire I did it in 5-10 min
I will save a lot of time for everyone: go under the car. I was able to swap out bulbs on both sides in about a minute. I used my 6” ramps to make it easier, but my big butt could easily get under there without them.
Well you should try changing the bulbs while the stupid pcm is floating around right in the way cuz the idiots that had the car b4 me broke the mounting brackets for it and left it floating around inside the bumper
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
Terrible design Ford. This job takes only 30 seconds on my wife's Honda. Other stupid design flaws include changing wiper blades, and orange warning lights that come on but don't tell you what they're for without going to the garage for a diagnostic check. I've only had my Ford 3 months but I think I'll be going back to Honda soon it's such a PITA!
I like my Ford, but damn. Why did they destroy the ease of working on the First escapes with this malarkey. I swear they don’t want people working on their own cars these days . I would think taking off the Skid guard then the black box would be easier ? Crazy though 😮👈
I was able to do this by feel without removing the tire, just loosening the splash shield and reaching in. Slide the bulb out, put the new one in and twist it back into place. Helps if you have tiny feminine arms too haha!
I have nothing to ease the install process.... just a reflection on how easy it " used to be " decades ago.. In addition, the battery change is either an $ 80 job or do it yourself in over an hour.. Just ridiculous..
LOL I own a 2013 Escape, I paid a mechanic to do it, screw that shit, to change a bulb, wait till you have to change the battery on it, just as tedious.
So disassemble the front end take half the engine apart all to change a fucking single light. 4 hour job. What happened to take out 2 screws and your done. 30 second job.
Is this seriously what needs to be done?! I can't afford to pay them for this shit. But hell I don't want to do all this on my own either I don't have all the tools to take the damn wheel off my car fuck.
Thank you for this video. You are a patient person! I was hoping I could do this myself. Sadly, no. Who thought this design was a good idea? It would be simpler just to buy a new car!
lmao! true
Same
🤣 yeah the passenger side marker light bulb blows you might as well invest in good 🔥 insurance 🤣🤣
That's the dumbest thing I've heard
My 2013 Ford escape went for $30,000 it was a woman that designed the 2013 Ford escape. Without any thoughts on how to change a bulb with a burnout it's absolutely ridiculous.
HOLY COW!!! Thanks for the video because it made it easier but I don’t think the manufacturers want us to take care of the cars ourselves. Crazy!
This was without a doubt the biggest PITA EVER for a parking light bulb replacement!! It took me almost 2 hours!!
I agree. Ford has made the process to change bulbs is like you said a major PITA. Must be a money maker for them but even my favourite mechanic shop does t want to do it.
Yeah, it’s definitely that car that will sit in the shop for hours for such little maintenance work such as a bulb…. I was looking at the placement of the alternator and it’s horribly located in a difficult to access location
Wait till you need to replace the front headlight bulb!!! The entire front end has to come apart!
So basically changing ford escape turn signals, is like giving birth to a baby calf...
A breech birth at that...
lol, probably so or mayne like 'you can't get there from here' ;)
Yup my method for changing out the lites was to just sell the Ford instead. Much easier …..
😂😂😂😂
Changing the battery on this car is the same way.. oh and the cabin air filter lol
My wife changed the driver's turn signal with my guidance in about 3 min. Her small arm was able to reach it from inside the engine bay which was so nice after seeing how most are doing it. So, in short, get yourself a wife with thin arms and have a lifetime of free turn signal changes.
Yeah I saw a video of a person with a thin arm do that somewhere...
Thank you so much for this! I got my wife to pop it out and new one in in a few minutes. Saved a ton of time
Try the passenger side one yet😅
You haven't mentioned she is good looking too!
Fucking stupid ass cars
Leave it to ford to make the simplest of repairs one of the most difficult things to do.
That's just cars as a whole these days.
I just had to pull this bulb for the second time. First time I had scratches almost to my shoulder this time I looked a little deeper and figured out that only 3 screws hold the black box in place. 2 in front and one in back that can be reached with a 1/4 drive ratchet/8 MM socket then the box will swing right out of the way leaving the turn signal in plain sight and easily reachable. Much easier that way.
this is the best way for driver side for sure
Can you to post pics? Or vid?
What is that black box? I dove into the driver's side today, ran into that box and wasn't sure what to do. I can not get to the turn signal unless I remove it. I am trying to switch all of those bulbs out to LED and I managed to pull a wire off of the fog light. Now I have to take that box off for sure.
This can be done without pulling the entire inner fender out. After you take out the 7mm flange screws, you can muscle the inner fender in a bit and insert your other arm to unplug and take out the bulb. You'll have to do it by feel, but it keeps you from having to take the whole inner fender/wheel off. Also, use your finger strength, otherwise your forearm flexes in the gap. The factory bulb is a 2827, which is higher wattage and twice the price of the standard 194NA bulb, but much brighter.
The best answer so far. Thats exactly how I did it
Thank you, I was about to do all this.
No shit, this guy figured out how to climb a mountain to get up the little hill hey.
In case anyone stumbles on this, the 2827 bulb is the PARKING LIGHT, the TURN SIGNAL is 7440A.
@@kenneththomas2032qp❤
I did mine on the passenger side wasnt too bad. I jacked up the car, removed the wheel and the wheel splash cover. Also if you take the under engine cover down you can fit two hands in. This makes a big difference to hold on the socket with one hand while to change the bulb with the other. While the car is jacked up and splash cover down you might as well change the oil. Don't you love Fords?
I just went through this nightmare myself yesterday. The passenger side is much easier to do than the drivers side, as on the drivers side, the ECM box is in the way blocking most of the access unless youve got really skinny, long arms.
Passenger side is super easy once you squeeze your hand up in front of the windshield washer reservoir.
Left side: I think I developed Tourette’s Syndrome and peeled off the first 5 layers of skin off my arm trying to accomplish it.
Kilo Delta just did my left tonight and my arm is all scraped up. What a stupid design.
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
😃
You've got to be kidding me! This will get done at my next oil change at the dealer.
Joe Barbieri I feel you brother. a lot of new vehicles you pretty much have to pull the bumper cover to replace bulbs and lights. more money for the stealership.
200.00 dollars later. No thanks!
You just convinced me to take it to a shop. Helpful & Great video though.
Just did this job. Required someone else with thinner arms to get the bulb in and socket back in place. I won't do it again. Shame on Ford for making this such an ordeal.
Funny. I’m watching this video again thinking I had never watched it. 2 min into the video I’m thinking, “I’d rather sell the car than try to change the parking light myself.” 😄
Hi everyone, 29 November, 2021 - on driver side, I was able to successfully replace bulb without wheel removal or splash guards, etc. i removed the airbox and was able to reach right down into the cavity next to radiator to reach the bulbs . You can see the turn signal and fog light bulb assembly from above where it inserts into lens area. Give it a try with high intensity light. I took me about 10 minutes to manipulate the bulb into the socket, but saved time on everything else. Good luck! -Will take a look for options on left side and comment if successful.
And he was never heard from again :(
On Dec 12, 2021 - my son's 2013 Ford escape was hit by drunk driver at intersection after that driver ran a red light. sorry - car total loss and fortunate that nobody was hurt other than a few bumps.
@@alexanderhelton On Dec 12, 2021 - my son's 2013 Ford escape was hit by drunk driver at intersection after that driver ran a red light. sorry - car total loss and fortunate that nobody was hurt other than a few bumps. sorry i had no update.
You rock man. Just got the driver side bulb out using your method. Was already under the hood to change the battery and got to thinking about replacing the burnt out turn signal bulb and saw your comment. Huge thanks for the tip.
I just replaced the dirver's side turn signal and running light on my 2013 by removing the airbox. Piece of cake. Thanks for the suggestion!
Thanks for the video. Glad I found it before going too far. Definitely paying a mechanic to do it. Then getting rid of the POS.
Absolute nightmare to do. I tried taking off the screws referenced in the video and it's not enough to reach the turn signal housing. You'd need to remove the bottom lower fender to reach that housing. Moronic design for the express purpose of making customers do it during a Ford service. Changing a safety turn signal bulk should be 10 minutes as it is on the rear. This is now officially my last Ford car I'll ever buy.
There probably all the same now a days they want you to have to go to the dealer where they can charge you some outrages man hour rate to change a what used to be a 50 cent bulb now I am afraid to ask
Talk about an irritation! Just for a directional.
Thanks for the video! Really appreciate it!!
If anyone needs to know........2013 yellow turn signal bulbs (front and back) are Sylvania Longlife #7440A
Are you sure they are the same bulb? I bought them, but most people are saying they are 1787 bulbs not sure if they are the same. Just wanted to check if you changed the front ones.
I have done this twice already. By advice, do all the bulbs at the same time, and swap to LED so you don't have to do them so often. Changing a couple of directional bulbs should not take an hour.
What kind of light bulbs is it?
7440A LED
Ok guys. Just had my learning curve on this one. My tech and I figured out it takes 5 minutes to pull the air box out and you can reach right down and change it. Also you can see everything your doing. Total tome start to finish is about 15 minutes max. Hope this helps.
+fishin rod72 thanks for that info. Next time I get one in the shop I'll check it out and try to film it.
Gonna be doing this in a couple days. I was just thinking "there has to be another way". lol. Do you have room to reach both sides doing this or will I have to muscle the right splash guard to do that side?
fishin rod72 thats huge, thanks! I spent 3 hours trying to go in through the wheel and still didn’t get it done!
Can you give more details on air box removal?
Doesn't work on the 2015
Edit: my vehicle is a 2015 .it is hollow behind the trim piece i stated.
However i was informed by someone who tried with a 2014 (in my reply comments) and it didn't work for theirs because it was solid behind it.
So if your vehicle is solid behind i apologize it definitely won't work for you.
OK so I know this video is old . However on the front of the ford escape above the light is a black trim piece. You can safely pop that off with a skinny flat head and you will have access to the blinker bulb/turn signal bulb which ever you call it . Takes less time and definitely less of a headache. Idk why he did it this way.
I got my 2014 Escape a few months ago, and I've been wondering if this trim piece could be removed to access the fog lamp assemblies. One of my fog lamps burnt-out a couple of days ago (first one since purchasing the vehicle), so I'm going to give it a try tomorrow. Thanks @Summer Collett 🙂
Update: Not sure if all Escapes are the same, but I tried this on my 2014 Escape Titanium this morning and behind the trim is piece is solid bumper. No access to the fog lamp assemblies. Not to mention the little tabs on the trim piece are super thin and brittle, so a few snapped with the tiniest bit of pressure. I'll have to order a new trim piece now, but oh well. Now I know.
Sorry to hear that mine is a 2015 and it's hollow behind it. So I'm assuming the older years is why he showed it that way.
@@summercollett485 No worries. I wouldn't have known until I tried. Looking at it, I could probably cut a small access in the panel behind the trim piece just big enough to sneak a hand in. But that'll be another job for another day (and after more thought).
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
What a pain in the ass that was. Thanks for the video. It would have taken me significantly longer to figure out without it.
yeah I actually painted and replaced that bumper cover before I checked the lights. Would have been way easier with that bumper cover off.
Who ever designed it needs a good slap definitely getting rid of this next mot
Me too. This sucks! I'm going to trade this car. Something so simple so damn hard for no got damn reason!!! Ugh.
For me is the low beams headlight in my 2015 Ford Escape. I rather had it done at Ford for the running lights. I just had my fog lights replaced. I still need a light bulb for my running light for the blinker. It drives me nuts on it hearing the clicking clicked fast.
Don't go through the wheel well. Take out the airbox. I just did this on my car and it took 20 minutes and was easy with only an 8mm socket. This worked for the drivers side, passenger side may be different.
I read this,Jacked up the car
I have an Edge - probably the same procedure? In that case, I'll be taking it to the shop and never trying it myself! LOL
I died laughing after seeing the wheel out lol
Francois Edmond yea no shit. Should have been the first thing. Nothing like feeling your way though it.
wtf I wanted to do this on my own but Jesus.
Evan M I know I’m 2 years late, but to be quite honest, the best way to do it is take the whole bumper off, if you don’t want to be on the floor struggling in weird angles. It’s not hard to take off a bumper imo.
2015 Ford Escape(No black box in mine)
When you have a warped tire that ate through the fender wall but nothing else so you can stick your hand in there, and grab it because you have long arms.No tools required! 😆
what a pain in the butt?!?! cool channel. very informative. keep up the good work. 529
Thanks for this video! I bought the car with some damage to the drivers side.(headlight/bumper cover/signal not working) I helped my buddy for 2 hours to find out it wasn’t the bulb. I will need to buy a part. I just had a question for you: what is the grey coloured “connector”piece that leads from wire attached to the socket holding the turn bulb? Its cracked and disconnected and I would like to purchase one but don’t know what it’s called. Thanks in advance!
I have this same issue, did you ever find the answer?
@@hunterharper5521 Yes ordered the part and installed.
I recently had to replace the battery on my 2014 escape. Although it was doable it was equally involved with removing other parts to get to the battery. Ford engineers have done a wonderful job designing the car so that you need to take it to a dealership were labour charges will be ridiculous because of time to do the repair. Total win for Ford total loss for the customer
Is there a trick to getting the bulb out of the housing? My right side is out. I can get the bulb assembly out of the lens area, but can't unclip the bulb with one hand. I can't quite reach with two hands. I haven't tried taking off the wheel, since I don't have a paved driveway and don't trust the jack stand on gravel.
thanks for your explanation
There seems to be a lag in the turn signals on the 2013-2019 Escapes. They illuminate rather slow compared to normal turn signals found in cars like GM, Honda, Toyota, etc
For the left one I just removed the air filter box and you can access it that way. 10 min. i uploaded a video of it. 2013 escape easy front left signal light replace
If you arm is small enough, you can reach in from the top and change the bulb with one hand. My wife just did it. You don’t have to remove anything. It’s not easy though
Going price from the dealership to do this is over $100, they said it took them over an hr to do this. They also said they gave us a deal for changing the bulb.
willijnm should only take maybe 1/2 hour if you know what's involved. personally I think it's crap to go through that much work to change a bulb. This is easy through, try changing a headlight bulb on an late model Audi. usually have to pull the bumper cover.
This vid was me feeling my way through it. should have taken the wheel off from the start
Wtf? I found this video after realizing I had already removed too many things but Jesus, I’m putting everything back, got to have my break pads replaced soon anyway so I’ll try replacing the damn bulb then
Wow...what were they thinking?? It was WAY easier on my 2011 Escape.
I’m just wondering if you can take that black grill off instead?if not, this is a punishment just to change the bulbs.
It’s the wife’s Escape, and if you think the turn signal bulb replacement sucks. Wait till you have to replace the battery. Ya all but have to remove the windshield. My 2008 Acadia is the same BS to replace the headlights. Pull tire, pull splash guard and blindly reach.
I took out the air filter box. carefully and gentle because plastic is delicate.
How do you even take the bulb out? Probably the easiest part but i haven't found one video of that. Pull it straight out once it's been removed but isn't there something holding it in?
I replaced my passenger side and its still not F###### working. Any ideas? Great job Ford!
Thanks. I was afraid that was the direction I had to go in from.
You have got to be freaking kidding me.
The 2013 Ford Escape is by far one of the worst designed vehicles I have ever had the displeasure of owning. What a POS design. Thanks for your video.
But, you didn't show how to get the bulb out of the socket. I can't get both hands on it and I don't want to break it. I just need to know how it is attached.
What type of build it’s that?
Don't listen to this... I just did mine... come from the front. Like your trying to change the oil ... and reach for it... and do it from that way... 5 minutes instead of 30 to 45 minutes....
From the top or bottom?
Never seen a car that every little maintenance item was such a pain in the ass.
I tried this last week on my daughter's 2013 on teh driver's side but i can't get past the black module there and have no idea what it is so I can't look to remove it. I will try the airbox route this weekend.
That’s Also a horrible location for the brain box of the car to be right next to the tire and where water comes in horrible design , just remove engine splash guard no need to remove tire I did it in 5-10 min
Do you know the kind of bulbs these are? Size and model
What kind of light bulb is it code?
I guess I’ll ride around another year with that bulb out, or take it to Ford let them replace it, their design!
Back to "hand" signals
Easy peasy ... but how does the actual bulb come out of the socket??
Lucas Johnson it just pulls out not like the old style.
Got it out but man, pushing it back in is taking me so long i came back here just to complain before i try shoving it a few more times XD
I will save a lot of time for everyone: go under the car. I was able to swap out bulbs on both sides in about a minute. I used my 6” ramps to make it easier, but my big butt could easily get under there without them.
Well you should try changing the bulbs while the stupid pcm is floating around right in the way cuz the idiots that had the car b4 me broke the mounting brackets for it and left it floating around inside the bumper
Do you have to use resistors for 194 LED parking light replacements?
No
Man! What a pain in the ass. It would have been so easy to make an external cover for this.
How to remove blinker bulb from holder
I need the light fixture. Whats it called
stupid hard job, not surprised
The wife thought I was joking when I told her I couldn't change it myself, my arm just couldn't reach the housing
Just did this on a 2014 Escape. This video helped a great deal. In advance, you better have long, skinny arms. I have neither. I will have scrapes and lines on my right forearm for the next couple weeks, guaranteed. To "fishin rod72", please state what model year and motor you have and post a video because not saying the year, your post is unqualified. My 2.0 Ecoboost.....thre air box would not have made any difference.
Once I got there, How does the bulb come out?
After twisting the bulb socket out of the back of the lens, just pull the bulb straight out of the socket.
Yeah you dont have to remove inner fender or tire i put led fog lights in my wifes escape just taking bolts out
I don’t think that that was it like he said at the end of the video. It was much more than that!!
I just take it to a professional n let him worry about it
This is the harder thing I had ever done in a car. I scrash every part of my arms.
What is the bulb part number?
What is the bulb size
Why not through the hood?
Terrible design Ford. This job takes only 30 seconds on my wife's Honda. Other stupid design flaws include changing wiper blades, and orange warning lights that come on but don't tell you what they're for without going to the garage for a diagnostic check. I've only had my Ford 3 months but I think I'll be going back to Honda soon it's such a PITA!
I woulda just pulled the bumper on that PoS. Full access lol
and thats why my signals been out for a year already
I like my Ford, but damn. Why did they destroy the ease of working on the First escapes with this malarkey. I swear they don’t want people working on their own cars these days . I would think taking off the Skid guard then the black box would be easier ? Crazy though 😮👈
Hey Ford, make this friggin harder!!!!! Jeez.
I was able to do this by feel without removing the tire, just loosening the splash shield and reaching in. Slide the bulb out, put the new one in and twist it back into place. Helps if you have tiny feminine arms too haha!
How can u come up with a worse design??! I now understand why so many people don't use their turn signals
Engneers don't are how hard it s to work on these things!
I have nothing to ease the install process.... just a reflection on how easy it " used to be " decades ago.. In addition, the battery change is either an $ 80 job or do it yourself in over an hour.. Just ridiculous..
ugh f*ck new cars... need my 72 Chevelle back!
Ridiculous.........just plain ridiculous. They make it so you don't want to work on your cars anymore.
That is a dangerously bald tire.
That's it! You're effing hilarious! How do you get the bulb out? Ford can go screw on this BS!
Funny, just dropped the car off this morning for service!
This is why I don't buy Ford, (junk) but I have to do this for my girlfriend😕
I don't know why they need to make everything so difficult these days. lol
Not exactly accurate for passenger side considering the washer fluid is blocking everything.
can they make it more harder 😒
And I thought changing the third brake light was annoying oml
Who ever invented this ludicrous idea should've fitted non blowing bulbs
LOL I own a 2013 Escape, I paid a mechanic to do it, screw that shit, to change a bulb, wait till you have to change the battery on it, just as tedious.
MDKArtist i have a 2016 nd the battery is just horrible smh thanks ford
this is effen ridiculous! is this why the dealer wanted to charge me over $150 bucks... no way Jose. Really FORD???
buy a bulb from halfords UK and they will fit it for 5 quid!
So disassemble the front end take half the engine apart all to change a fucking single light. 4 hour job.
What happened to take out 2 screws and your done. 30 second job.
Don't do it this way - way too hard and time consuming. Just take the belly pan off and stick your hand in. Not hard.
I own one of these God forsaking pos cars.After putting a starter on it yesterday,I believe I aged 5 years.All of this just to change a bulb🤣🤣insane!
Is this seriously what needs to be done?! I can't afford to pay them for this shit. But hell I don't want to do all this on my own either I don't have all the tools to take the damn wheel off my car fuck.