Epson NX400 Printhead Cleaning
Вставка
- Опубліковано 14 жов 2024
- Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT
Printer Ink: amzn.to/3p7Rsds
Epson Home XP 4000: amzn.to/3lBUuog
Disclaimer
Some links may be linked to an affiliate marketing account and Best Printers may take a small commission for any products you purchase. We are not sponsored and companies do not provide products that we review. All products on our channel have been purchased.
Claims made in repair videos are deemed reliable but not guaranteed. Each situation is unique and your printer may not be repairable. Brandon or Best Printers cannot be held liable for any damage caused to printers from the use or misuse of these instructions.
All Links above are resources to either a cleaning kit, printer, ink or other items/ services that we hope are helpful to you as the consumer. We wish you the best of luck with your printer repair and product purchase!
© 2021 Best Printers
Hey after cleaning the nozzle of the printer the ink not recognized what should i do
سلام اخي عندي ابسون x400 بعد تنظيفها لم تتعرف الى كرطوش دات اللون الازرق
Hi leave the printer off for 24 hours and try again.
Hi, any ideas why the printer (NX420) shows printer error after cleaning the nozzle heads?
If the cleaning was done properly and electrical components were wet in the process, and then the printer was powered on that would cause an error code. What you want to do is leave the printer off for 24 hours and then turn it back on try to reset it that way.
@@BestPrinters Thank you for your reply!! I restarted the printer and it seems to be making a clicking noise - as if there is friction within the components.
Error message is still displaying on the LCD screen. :/
Where does the dirty solution go ??? 😟
Onto the paper towel.
I did everything in the video, put in new ink, all was fine, put it on maintenance nozzle check, cleaned heads several
times, yellow didn't show up, re-cleaned yellow with solution, replaced yellow, and it went to "not recognizing ink, replace ink, remove replace same new ink, still reads not recognizing ink. Is this printer garbage now?