@@ikeaeverything I did the same. So far success rate is 50%. I have to push really hard and two of the knobs(nickel part) are turning with the screw, the square shape didn’t stay as designed. I used the super glue to tight the white part with the nickel part, not sure if it will stand the force. Of course it causes a minor cosmetic issue. I am a bit disappointed with this one as ikea has been selling it like forever. This kind of issue shouldn’t be happening.
@@ikeaeverything thanks for the reply. Seems like superglue works ok but not sure for long term. I think I will reach out to ikea team see how can things get improved.
IKEA will fit a sink it you tell them the measurements (they should cut it for you normally). Don’t know all the sink sizes but they can be easily found online 👍🏼
Do you think this IKEA KNOXHULT can be a good base for making a Kitchen Island? Do you know if it is possible to buy other front doors from IKEA to use on this?
Hello there, Due to the fact that there is a (flimsy) back I don’t think it’d work as an island tbh. I used to have an island from ikea but it was about double the price.
Hello, i used regular wood clamps to hold the top (it’s written in the manual). That way you can screw it without the top moving (there are no pre-drilled holes) Cheers
c'est quoi le nom de ce plan de travail chez ikea ? j'ai des meubles bas KNOXHULT avec plan de travail je veux combler un coin avec le meme model vendu avec knowhult
I checked out the KNOXHULT line at my local IKEA and I was immediately disappointed in the quality. The in store display kitchen did not seem like a "real" kitchen. It seemed like a terrible quality It looked bad. Right away you could see it looked terrible compared to their other cabinet product lines.
Yup, the price tag goes along with the looks… you can also get 40k kitchens from them and boy do they look better but again, depends on the budget - you get what you pay for. Cheers
@@deehines5750 Yes It is all particle board, but the laminate foil was beyond cheap compared to the other IKEA cabinet lines that had more durable finishes. I think if anyone were to purchase this they would be having to spend additional money to replace it after two to four years.
@@deehines5750 I suppose if someone were very good at painting over laminate. However I noticed the interior drawers that also are made of particle board were very very "gritty" and not smooth because the laminate finish for the drawers were even worse than the cabinets themselves. I do not know if someone could smooth the interior drawer parts before painting. I would highly recommend you examine Knoxhult in person. Perhaps for a temporary kitchen that you plan to do a proper remodel of this set up will do. But do not use these for an office kitchen or if you are a landlord looking to rent because they will be damaged in no time. I would go with IKEA's Metod system instead. Metod is newer and cheaper than Sektion (IKEA's most expensive base cabinet), but better quality than Knoxhult. Please go to your IKEA to really see everything in person. Everyone's expectations are different.
for the knobs, I think putting on painters tape before drilling will reduce any damage and chipping from happening :)
Good tip 👍🏼
(Nothing chipped and/or was visible on mine but it is a great piece of advice in general - thanks!)
You put the back panel backwords. The white side should have been facing you.
Good to know 👌🏼
I noticed that as well
The drawer and doors look not in line. Are they afjustable
THanks for sharing
You’re very welcome
Bonjour, je n'arrive pas à insérer le tiroir dans la fente.
Comment avez-vous fait ?
Hi
I am interesting to buy this exact setup however I hoped you would demonstrate how to put the LAGAN oven as well. How did that procedure go?
hi, how is your cabinet comes with 2 drawers? the set should have 1 drawer only
🔥🔥🔥
😊
Can you modify which side of the cabinet you want the stove?
Interesting 🧐
👍🏼
Hi! Did you have to use the IKEA Utrusta oven holder to install that Lagan oven?
Hi ! is it possible to it set up the as to have the oven on the right hand side ?
Hi there, yes normally you can since there are holes on both sides AND the door doesn’t have the hole for the knobs. Cheers
Hi does the oven just plug into a normal.power outlet
Hello! No - it has to be cabled by an electrician and it’s a specific high-power outlet that you’ll need. Cheers
Do we need to fix this to the wall? Or it is safe to keep it unfixed?
Hello 👋🏼 I have it unfixed and no problems 👍🏼
How do you to keep the handle knob stay in place? It turns when I screw it. Can never get it tight.
Hello Jamie, i hold it on one side and use a screw gun to tight it up. Hope that helps 😊
@@ikeaeverything I did the same. So far success rate is 50%. I have to push really hard and two of the knobs(nickel part) are turning with the screw, the square shape didn’t stay as designed. I used the super glue to tight the white part with the nickel part, not sure if it will stand the force. Of course it causes a minor cosmetic issue. I am a bit disappointed with this one as ikea has been selling it like forever. This kind of issue shouldn’t be happening.
I see! Strange indeed. Maybe a set of faulty knobs? Mine went fine (I’ve put 4 of them). Sorry to hear that it didn’t work as planned
@@ikeaeverything thanks for the reply. Seems like superglue works ok but not sure for long term. I think I will reach out to ikea team see how can things get improved.
Hi, can you tell me if I can put a dishwasher instead of one of the doors? Thanks
That’s an excellent question! Am sure there is a way it could be done but I did not try. You might want to ask ikea directly. Cheers
Hi do you know what’s the widest sink that fits? Or can you cut into the frame to fit a wider sink?
IKEA will fit a sink it you tell them the measurements (they should cut it for you normally). Don’t know all the sink sizes but they can be easily found online 👍🏼
the widest sink will fit around 24 inches
Is the white is melamine? Is it mate white or glossy? Thanks
Do you think this IKEA KNOXHULT can be a good base for making a Kitchen Island? Do you know if it is possible to buy other front doors from IKEA to use on this?
Hello there,
Due to the fact that there is a (flimsy) back I don’t think it’d work as an island tbh. I used to have an island from ikea but it was about double the price.
@@ikeaeverything Ok not possible to buy a better back, or paint it? Do you have link for the kitchen island you had?
can you please say what type of clamps did you use and for what? Thank you.
Hello, i used regular wood clamps to hold the top (it’s written in the manual). That way you can screw it without the top moving (there are no pre-drilled holes)
Cheers
Thank you was looking at getting one of these can you tell me if the doors are glossy or matt?
Thanks mark. They are Matt 😙 take care
Any way to find a 24 in over so e cabinet vs 30 inch?
The back panel is the wrong way round. Brown at the back and white inside!
Yep I know, but I won’t be changing it anymore 😫🤦🏻
Hi, can I place the frying pan on the top of the table right after I cook? Can it withstand the heat from frying pan directly?
I would strongly recommend not to do that, but I didn’t test personally
c'est quoi le nom de ce plan de travail chez ikea ? j'ai des meubles bas KNOXHULT avec plan de travail je veux combler un coin avec le meme model vendu avec knowhult
Bonne question! Je l’ai acheté directement avec donc je ne sais pas le nom exact mais je pense qu’il doit avoir un nom similaire probablement
How long did it take you to build it?
Couple hours if I recall right
Does it attach to the wall? Can I put a sink in it?
It does attach to the wall. Don’t think it’s particular model can have a sink put into it (but maybe IKEA has custom ones that can)
Can the knoxhult use the havsen sink?
You’ll need them to cut it out for you
back wall upside down
Yep - that’s known (see other comments)
Is the back open? Or is it boarded up?
It has a very thin board - but y’a it’s boarded up
Does this come with the oven?
Thanks, no the over gets purchased separately
Hola,cuanto mide el hueco del horno?
I checked out the KNOXHULT line at my local IKEA and I was immediately disappointed in the quality. The in store display kitchen did not seem like a "real" kitchen. It seemed like a terrible quality It looked bad. Right away you could see it looked terrible compared to their other cabinet product lines.
Yup, the price tag goes along with the looks… you can also get 40k kitchens from them and boy do they look better but again, depends on the budget - you get what you pay for. Cheers
All of their stuff is particle board, how much of a difference could there be?
@@deehines5750 Yes It is all particle board, but the laminate foil was beyond cheap compared to the other IKEA cabinet lines that had more durable finishes. I think if anyone were to purchase this they would be having to spend additional money to replace it after two to four years.
@@juztnlast953 Thanks for the info. Do you think there would be an issue if it were painted first?
@@deehines5750 I suppose if someone were very good at painting over laminate. However I noticed the interior drawers that also are made of particle board were very very "gritty" and not smooth because the laminate finish for the drawers were even worse than the cabinets themselves. I do not know if someone could smooth the interior drawer parts before painting. I would highly recommend you examine Knoxhult in person. Perhaps for a temporary kitchen that you plan to do a proper remodel of this set up will do. But do not use these for an office kitchen or if you are a landlord looking to rent because they will be damaged in no time. I would go with IKEA's Metod system instead. Metod is newer and cheaper than Sektion (IKEA's most expensive base cabinet), but better quality than Knoxhult. Please go to your IKEA to really see everything in person. Everyone's expectations are different.
How wide is the inside of the center drawer?