Thank you very much for your review of the FI and X1- mk2 I forgot that I can do so much with this set up it's brought new life into my music sets. At first I was just using 1 deck believe it or not now Im using 3 decks 2 track decks and one remix decks that Im capturing loops into.. .
Looks like the citronic djp1. I owned one before and it comes with two sizes of platform which is very useful, however in use its not the most sturdy of stands
I see that's a cdj stand them wee beauts are laying on. does traktor sell an upright facing stand for these 2 controllers by any chance iv only seen the hard back cases that lay flat an the carry cases. maybe a sturdy cdj stand is the way to go
Hi thank you for your video. I want to end up with Two F1's and 2X1's and a Machine. However Ill start off with a F1 and a X1, I noticed you could change your eq's for both straight from the mixer? Can you do this for each track deck and each mixing deck desperately? or is it the overall sound of the device? Do I need anything extra ie the audio Dj interface or a Z1?
Hi I have an DJM 800 and F1 and X1 can I set up all them together with an A6 or an A10 is needed to have the cue of remix deck ? Many thanks for your answer in advance
Great review and you have helped me make my mind up with what I'm buying... 1 question. The samples (High hats and kick drums etc) that you are dropping in via the F1. Do they come pre loaded from Traktor or do you need to add them all yourself?
Awesome video, thank you for the upload. But my question is Can you plug in a mic and headset into the mk2? If not, how do you integrate that if you're just utilizing the mk2?
Can you use the X1MK2 or F1 to crossfade between deck A and B? I play house music and blend my songs together would it hard to used the F1 and X1 ? Thank you very much for your video. Could you do a video with mixing or blending deck A to deck B?
Hi, I got the same set-up, 2CDJ2000 +DJM800, F1 ,X1. The question is, do I need an interface tractor audio 10 for that? or how it going to work all together?
yes unless you upgrade to a mixer that has a certified traktor audio card built into the actual mixer for example like the djm900 or djm-t1 or the native instruments z2
Fahad Almusallam Yes it's working all together with me without buying an interface, big thanks to Traktor just do these simple steps from that link: www.native-instruments.com/en/support/knowledge-base/show/774/how-to-use-two-pioneer-cdjs-for-audio-playback-in-traktor/
Dmitry Paranyushkin Yes it's working all together with me without buying an interface, big thanks to Traktor just do these simple steps from that link: www.native-instruments.com/en/support/knowledge-base/show/774/how-to-use-two-pioneer-cdjs-for-audio-playback-in-traktor/
Hi can you please explain me how to use my x1 and the dim 900 only. . i can't find the right settings. . i have all my drivers and softwares up to date and i thing i have to do something on the traktor settings. I'm using a mac book pro. no cdjs just the x1 + dim 900 nexus mixer. . please let me know . .
you need to download and instal this mac driver for djm900nxs, and a usb cable, in order the mixer to be recognized as a sound card. really it can't be more simple than this www.pioneer.eu/files/support/DJ/DJM-900/DJM-900nexus_M_1.3.0.dmg
Matthew McGibney The djm900 has an integrated sound card which you can use in traktor. You need to download the djm900 drivers from pioneer's site and launch the djm900 configuration utility when connected. Works very well, I hardly ever use my audio 8 anymore because of this. Just plug in the usb cable in the mixer, switch the cdj channels from line to usb and you're pretty much done. perfect for taking over at a party
I'm currently using an Traktor S4 MK II. I've been looking at buying additional hardware and the F1 & X1 we're first to look at. After watching this impressive review, the F1 seems to be a definate for me. However the X1 seems pretty pointless...all I want is a bit of hardware that I can use mainly for effects. The touch line...or scroller? is what attracted me to the X1. RMX 500 seems cool too! But i'm after something from native instruments. Please help! Thanks.
getting 2 X1 the older ones and a F1 and then will be getting a new mixer looking at A&H xone 96 and just sell the rest of the equipment... love how Traktor lets you be more creative... use to have a Traktor S8 but the PS kept going bad and now it won't even start up now but when it was working was great... do you use STEMS also
The usb soundcard in the mixer will split the channels to simulate what is going on in traktor so deck a b c d will be channel 1 2 3 4 on your mixer, hope that helps mate
@@michaelcohen6272 one more question do you fancy the Pioneer mixer over a Allen & Heath... like the X96 have 6 channel mixer so i could plug up my RMX 1000 also
I use Allen and heath over the pioneers for sound quality mine is the xone db2, but the rmx is more compatible with the pioneer mixers, I still think you can route the rmx through a xone 96 though, mine not so easy as there are no send and return
hi,where do you buying the support platform for the x1&f1? thanks a lot...
Thank you very much for your review of the FI and X1- mk2 I forgot that I can do so much with this set up it's brought new life into my music sets. At first I was just using 1 deck believe it or not now Im using 3 decks 2 track decks and one remix decks that Im capturing loops into.. .
Say what’s that stand you have the Traktor units on?
sir i know this is really late but can you tell me where did you get the stand for these 2 items please thanks
I want to know also! Please
Looks like the citronic djp1. I owned one before and it comes with two sizes of platform which is very useful, however in use its not the most sturdy of stands
i get so excited when you can have 4 tracks playing together and have a whole different.... is more about how you play than what you play....
I see that's a cdj stand them wee beauts are laying on. does traktor sell an upright facing stand for these 2 controllers by any chance iv only seen the hard back cases that lay flat an the carry cases. maybe a sturdy cdj stand is the way to go
that is the kind of stand you use for the x1 and f1.?
All yours beats, samples, kicks where did you found them?! Is it with Traktor Pro?
Hi thank you for your video. I want to end up with Two F1's and 2X1's and a Machine. However Ill start off with a F1 and a X1, I noticed you could change your eq's for both straight from the mixer? Can you do this for each track deck and each mixing deck desperately? or is it the overall sound of the device? Do I need anything extra ie the audio Dj interface or a Z1?
The eq is for the whole deck
hi, which stand for the f1 and the x1 is? thanks
Hi I have an DJM 800 and F1 and X1 can I set up all them together with an A6 or an A10 is needed to have the cue of remix deck ? Many thanks for your answer in advance
sorry can you give me information on the traktor kontrol stand? Thank you
You use some kind of mapping ? or are samples you record each song?
How did you get the F1 led pads to glow with the beat
Great review and you have helped me make my mind up with what I'm buying... 1 question. The samples (High hats and kick drums etc) that you are dropping in via the F1. Do they come pre loaded from Traktor or do you need to add them all yourself?
Do u know what them pads are that he's using because I want to by some for mixers
Very nice. Thanks.
hi, can i know how to connect 2 controllers with a macbook 13? has only 2 usb port as standard. Thank you
So you're saying I could connect the f1 and X1 to the djm 900?
So would i need a usb hub to connect all these to my laptop? Or how do the channels work if you're using a djm 900?
The connection isn't with the laptop but with the DJM 900, it´s plug and play Very Nice!
Awesome video, thank you for the upload. But my question is Can you plug in a mic and headset into the mk2? If not, how do you integrate that if you're just utilizing the mk2?
Nope. Need a soundcard or Z1 etc.
Can you use the X1MK2 or F1 to crossfade between deck A and B? I play house music and blend my songs together would it hard to used the F1 and X1 ? Thank you very much for your video. Could you do a video with mixing or blending deck A to deck B?
That is what Traktor Kontrol x1 is for :)
Hi, I got the same set-up, 2CDJ2000 +DJM800, F1 ,X1. The question is, do I need an interface tractor audio 10 for that? or how it going to work all together?
yes, how?
yes unless you upgrade to a mixer that has a certified traktor audio card built into the actual mixer for example like the djm900 or djm-t1 or the native instruments z2
Fahad Almusallam Yes it's working all together with me without buying an interface, big thanks to Traktor
just do these simple steps from that link: www.native-instruments.com/en/support/knowledge-base/show/774/how-to-use-two-pioneer-cdjs-for-audio-playback-in-traktor/
Dmitry Paranyushkin Yes it's working all together with me without buying an interface, big thanks to Traktor
just do these simple steps from that link: www.native-instruments.com/en/support/knowledge-base/show/774/how-to-use-two-pioneer-cdjs-for-audio-playback-in-traktor/
You used "X1"and F1 " with the CDJ's audio interface? or audio 6/10 ?
Alex Colle DJM9OO NXS is Traktor ready so no need for additional Audio interface.
hi i just want to ask where can i download a good hi hat like what you playing in f1
how about numark mixdeck quad it is compatible?
can these work alongside the pioneer DDJ-SR?
Hello there...What is the name of the stand that f1 and x1 on? really need one for my setup
DJF137137 Looks like Citronic DJP3 DJ Platform Stand
Hi can you please explain me how to use my x1 and the dim 900 only. . i can't find the right settings. . i have all my drivers and softwares up to date and i thing i have to do something on the traktor settings. I'm using a mac book pro. no cdjs just the x1 + dim 900 nexus mixer. . please let me know . .
You need a sound card like the Audio 2 or 6.
you need to download and instal this mac driver for djm900nxs, and a usb cable, in order the mixer to be recognized as a sound card.
really it can't be more simple than this
www.pioneer.eu/files/support/DJ/DJM-900/DJM-900nexus_M_1.3.0.dmg
Matthew McGibney The djm900 has an integrated sound card which you can use in traktor.
You need to download the djm900 drivers from pioneer's site and launch the djm900 configuration utility when connected. Works very well, I hardly ever use my audio 8 anymore because of this. Just plug in the usb cable in the mixer, switch the cdj channels from line to usb and you're pretty much done. perfect for taking over at a party
Nice vid what is the thing holding the x1 and f1 and where to buy ?
this is the stand it is on mate www.djtechdirect.com/citronic-djp3-dj-platform.html
thank you :D
I'm currently using an Traktor S4 MK II. I've been looking at buying additional hardware and the F1 & X1 we're first to look at. After watching this impressive review, the F1 seems to be a definate for me. However the X1 seems pretty pointless...all I want is a bit of hardware that I can use mainly for effects. The touch line...or scroller? is what attracted me to the X1. RMX 500 seems cool too! But i'm after something from native instruments. Please help!
Thanks.
Touch strip***!!
I like your table
ok question how do you have the remix deck setup on different channels on the mixer if it all is setup through USB
getting 2 X1 the older ones and a F1 and then will be getting a new mixer looking at A&H xone 96 and just sell the rest of the equipment... love how Traktor lets you be more creative... use to have a Traktor S8 but the PS kept going bad and now it won't even start up now but when it was working was great... do you use STEMS also
The usb soundcard in the mixer will split the channels to simulate what is going on in traktor so deck a b c d will be channel 1 2 3 4 on your mixer, hope that helps mate
@@michaelcohen6272 one more question do you fancy the Pioneer mixer over a Allen & Heath... like the X96 have 6 channel mixer so i could plug up my RMX 1000 also
I use Allen and heath over the pioneers for sound quality mine is the xone db2, but the rmx is more compatible with the pioneer mixers, I still think you can route the rmx through a xone 96 though, mine not so easy as there are no send and return
what track is it when video start?
saba nadiradze sounds like a snippet from Percolator - Cajmere ..
this is incredible. when i just have the money for that. i have an NI Mikro mk2 for now :(
what size laptop are you using?
15" Macbook Pro Retina mate
amazing man
Hi, can an S4 do this?
Thank you.
can i use both x1 and f1 with an audio 6 soundcard???
Yes
Cool, you sound like Slick Rick.
I am a pro Native Instruments,it was a real shit !
Scary
Hi there, neat video! Listen to our recent DJ Clips!
OMG... talking, talking, and talking... where is the music ????? STOP talking, let's the music play, and show us simply !!