Setting up Torque pro on an Android phone with ford enhanced. Powerstroke
Вставка
- Опубліковано 5 вер 2024
- I tried to show a complete install on a virgin phone. Most of the videos I've seen left out too much for me to do it without research so I made my own. Included are some special pids needed for the Powerstroke.
The fact that most problems that I have researched and videos that I have watched, have mentioned the knowledge that this man took so much time out of his life just to help others on how to diagnose, and repair these diesels is amazing. It is the simple fact that people like him make owning these diesels possible without breaking the bank. Manufacturers these days want you to spend your hard earned money on these common problems that should actually be recalls. People all over the united states have been educated and have noted that they learned something from Ron. It is sad and as I have written this post I have welled up with tears because he is in heaven now. This world we live in needs more people like Ron. He is gone but in a better place, and he's still to this day teaching people. I wish I could have been a friend or even met this down to earth gentleman. RIP Ron, you're truly truly missed by so many, and my heart goes out to his family because they were so blessed to have him in there lives. God bless you Ron and the family.
Phillip you're exactly right! When I found Ron's channel I was excited beyond words. I had only watched maybe three of his videos only to find out that he was killed only two days prior, my excitement turned to tears and I didn't even know of him. I've been watching and learning and he has educated me on diesel mechanics in so many ways, I'm forever grateful and thankful.
To Ron's family, Thank you for leaving up his videos and Thank you for sharing such a wonderful man with us, God Bless you all ❤
I concur with Phillip Ross > I have learned so much from Ron the Lord bless his family. Ernie Hernandez
Still helping us powerstroke owners everyday, respect.
Ive learned more about my 6.0L from Ron then anyone else. Thankyou to the family for not removing his very valuable lessons we learn from.
yes absolutely greatly thankful!
I just found this channel and I'm so thankful to Ron and his family!
It's 2019 and never knew a single thing about Ford powerstroke Diesel's, my son purchased an 05 f250 6.0 no start, I have watched every video, from Ron, and because of him I have learned alot and fixed this vehicle, I just wanted to say I am very sorry for your loss, to his family, lot's of prayers and thank you for allowing Ron to continue to help people, and touch there lives, God bless!!
Can you give me some ideas of where to look from your experience? I'm buying the same type for truck as you did.
This man was a legend. RIP Ron. Thanks for all your help.
Here I am buying yet another 6.0 after not having one for 5 years. Thank you Ron for all your help over the years and to to the huxell family for leaving his content up! Ron helped a TON thru his videos with my first 6.0 and I’m scouring his vids yet again! RIP Ron 🙏
To Ron's family and himself thanks for sharing your knowledge and wealth of information with the world you've helped many people over the years and you still are today. God bless your family for keeping your UA-cam account active not a easy thing to do I would imagine. RIP Ron you're a legend!
I was bummed to hear of his passing but im thankful the family has left his awesome videos up RIP DTR!
Had to revisit to learn how to set up my torque pro again on s new phone, thanks again to the family for keeping Ron's videos up.
Ron has been so helpful during his time on youtube. I bought my first truck yesterday, an 06 crew cab lariat, and there's no way I would have felt comfortable with the purchase without Ron's way of explaining the 6.0L system.
Again and again I keep coming back to Ron's channel Thank You so very much for keeping the channel up and running
This is best presentation I have ever come across. I have had Torque Pro for 3 years. Thank you. I have '08 Equinox 3.4L 6 cyl. I tow a small pup camber with it, about 2900 lbs, this Equinox's limit for towing is 3000 lbs (with electric brakes on camper). So I am close to the limit and worry what may happen to the transmission, so I monitor the transmission's temperature sensor when towing. Recently I messed up something in the app and wasn't getting the temperature readings correctly. Now it's fixed.
Your video clarifies everything for me, again. Thank you.
Sorry for your loss. Thank you for keeping your dads channel going. I am in the middle of building an OBD 2 blue tooth, Torque Pro, & 8in Tablet setup for my 99 7.3L. This video has helped me a bunch! I will be pulling a camper with her and need to keep an eye on the Temps and Pressures.
I 2nd your thoughts @Truck Farm. Deepest condolences to Ron’s family.
I am struggling to get my adapter talking to my ‘02 7.3L.
If I plug in Blue WiFi super OBS (mini) adapter into modern car everything is working, so I’m sure it has to do with tweaking the settings for an ‘02 7.3L. TF what protocol/settings are you using?
i took my truck to dealer it lasted a week 6.0 fixing myself now and thanks to this man Ron ......i miss him !!!!!!!!!! wish i could of called him ..
Ron's videos have helped me soo much over the years, Thanks for keeping his videos up. God Bless.
God bless this man he just saved me a ton of money on a scanner. This video is great. R.i.p god bless him and his family.
I just found Ron's channel today and he helped me with this video, thank you for keeping up his content.
I have been watching your videos because I am learning so much from you on working on my 2006 Ford F350 Lariat 6.0L Diesel. I downloaded the Torque Pro app and just finished watching this tutorial video. You explain it in detail and I really appreciate you taking the time for making the videos. Hats off to the person for filming you (I assume it is your wife-of course her and the kids get 95% of the profits!). Thank you so much, it is greatly appreciated.
This man left a wealth of information. I just watched this video and I'll have to watch it 10 more times to try to understand everything he's talking about, what an amazing guy. I just bought my first 7.3L van and his info is a huge help. He will continue to help me and others for a long time to come. What a tribute to his life, thank-you Ron.
James-
Wow, it doesn't surprise me. People from all over the globe are being taught by Ron. May ✌️ be with you.
Even a year later he's still a great help!
Trust me he will always be even for years to come.I still feel like I am dreaming thinking that somebody will wake me up.So hard to believe that he is dead.I have been having my F 350 Super Duty Lariat Crew Cab PowerStroke 6.0 for almost seven years now and I have always been able to be on top of the game because of his technical help the truck never gave me any issue for once and guess what for the first time since I bought the truck I am now having an issue with it and have not been able to see who to talk to about it. May God rest his soul.
STILL HELPFUL! RIP Ron!
And I second that, enduro trucker ernie. Thanks to the family for leaving his material up.
Thank you Ron you was awesome we still learn how to repair our vehicle. Rest in peace and God bless your family...
Thanks for your legacy Ron. You are still helping me even after your gone. RIP bother.
Go to his channel it's like the second to the last video where his son Explains It All it happened around 2017 I think bad car accident wasn't wearing seatbelt
@@jamesturner6949 LORD!!! May he RIP!
MyYTChannel Amen...a good man good father and helps so many people with his videos!
Thank you and God bless the family for leaving your posts up.
What a nice and helpful person. It's such a shame that bad things happen to good people.
RIP. Thanks for all your help on UA-cam.
I had no idea it could do all that. I’m amazed at how much I’m still learning from Ron. RIP you have always been such great help.
We've gone from massive 70's era Sun scopes to a smart phone the size of a wallet and 1/000th of the price in less than 25 years. wow.... Great video.
crazy cheap as dirt!
🇺🇸 AND AROUND THE 🌎 MISS YOU
REST IN PEACE DIESELTECHRON
THANK YOU VERY MUCH
FROM NICK AYIVOR FROM LONDON ENGLAND UK 🇬🇧
Rip Ron.
Ron is the MAN and may his Family be blessed :)
You are still the king. Thank you
I don't even have a diesel, but this was certainly helpful with my Crown Vic. Thanks Ron!
Wow this helped a lot, I was confused on why I couldn’t find some of the info/gauges I wanted, and have been using the app for a while, and now ik a lot more
Howdy DTR, I know that this video was done 7 or so years ago but still find it very useful. If your still around, I have a couple questions for ya. Hope to hear back from you.
Great how to. Just ordered adapter and downloaded torque pro. It looks pretty cool.
Yep. Set up torque pro app with the elm 327 mini plug in. Works great
I'd learned so much from this video. Thank you Ron! RIP my friend!
Did he die? What happened?
You have provided a fantastic video. Thank you for taking the time to do this.
Really good job, sitting here testing it out and determined that the OBD Link LX makes the truck stall after a bit, not immediately.It will not start at that point, take the LX out and starts right away. Interesting..working through it.
Leave up Ron's video's..to help all the 6.0 owner's..
Rest in peace bud
Thank you for your very helpful video. Such a clear instruction. Great
Thanks Ron!!! Eres la mera paipa, dondequiera que estes!!!
I'm sorry to hear about his passing..
Thank's Ron .... R.I.P.
You are the best Ron.. Thank you
I'm late, but THANK YOU SIR!
I have a 2019 f350 6.7 , my question is, will obd2 Bluetooth elm 327 connected to torque pro give false codes , was driving and check engine light comes on , at different times, goes off when torque pro is disconnected
Thanks Ron, that was great, im downloading it now,
R.I.P buddy thank you 🤙
9:34 Select "US Gallon, Not Imperial" if in USA. Great instructional video.
that is amazing video, a real master class, thanks for that, top man
Kauai - Fabulous!
Witch model Elm 327 mini Bluetooth for Andriod works for diesel 2006 F 250 sd ,6.0?
I been using the RD9 adapter. It works great.
This is fantastic. Thank you
I followed your instructions to a 'tee', but I can't get the FICM Sync function to respond. Also, would you explain the 'boost' feature? It's tied into MAF somehow?? Why is it at zero unless accelerating?
+Phillip Herder well ur better then me haha when i plugged mine in my dash looked like a christmas tree saying tow haul was on 4x4 and a tbc fault anyone else or u get that problem ?
Mine cannot connect with ECU, no matter which protocol...Also Ford, any ideas?
Excellent tutorial!
Thank you Ron
Great Video THANKS!
We have a crank no start condition on a 2003
HPOP has been replaced once
The ICP was replaced when the turbo was replaced a few months ago
This started out as a Hot no start then got worse to a no start at all
Air tested the oil system with no leaks
We did find a hole in the IPR screen, cleaned IPR and replaced screen, then air tested it. Opening and closing with the OTC IPR tool
Cranking we have the following
FICM=52.0Volts (Aftermarket)
FICM Sync=1
ICP Voltage = .5
IRP=83.5%
HPOP=221PSI
How high is the icp building? did you air leak it? Did you make sure the ipr valve is seating
+DieselTechRon
ICP gets up to 0.5 Volts Cranking
Air tested the oil system with the IPR Air fitting tool with no leaks
We did find a hole in the IPR screen, cleaned IPR and replaced screen, then air tested it.
Opening and closing with the OTC IPR control tool, it seemed to open and close just fine.
We did get her started just now with Brake Clean and a new battery
The new battery got our HPOP pressure up to 350psi
once we shot the brake clean in she fired up
while running
HPOP=811psi
IPR=32.1%
ICP=1.1 Volts
bumping the throttle the HPOP would climb up to 1200psi then fall as expected
But the most she will make on the HPOP is 350+psi while cranking.
I'm an Instrument and Controls technician so I have a question about the IPR
QUESTION; Does the computer control and monitor the position of the IPR to display the % closed, or just send a voltage value to the solenoid to open or close the valve based on the voltage sent?
Could the % be a false value? Meaning the computer thinks the IPR is 84% when really its hung up and not truly closing?
Hoping this is not a bad HPOP, as we know it was replaced at some point in its life prior to us purchasing the truck, the former owner did the head studs, HPOP and aftermarket EGR cooler.
We have replaced the FICM (Bullet Proof 52Volt), Garret Powermax Turbo, ICP sensor, and IPR screen twice
Thanks for
your advice
*If you need good Torque Pro , working version, get here:* plus.google.com/101372446964255129776/posts/Q5JdRKpvVNq
Sounds like a faulty Cam Position Sensor(CPS) does your tachometer move when cranking? Always carry a spare CPS in your glovebox with a ratchet, 10mm socket and short extension sensor's typically under $30 only buy Ford Motorcraft sensors never knock off junk from auto part stores. It's a 10 minute sensor change laying down under the truck.
Please don't take down this channel
Awesome
thank you worked for me
What sending unit is he using the blue one all I can find is the blue elm 327 is that the one?
Hi mate, I just keep getting a message saying (can not connect to OBD interface), any ideas. It is connected to the phone on Bluetooth but nothing works.
Can you please help me? I purchased an OBDII for Android. My car is 2004 Lexus RX330. I have navigation system but not bluetooth. So I use a Nulaxy Wireless In-Car Bluetooth FM Transmitter Radio Adapter Car Kit for bluetooth with my phone, I assumed the Torque Pro app and OBD scanner would work with it but whike it shows up on my list it won't pair, is there anything I could/should be doing??
Hey i am trying this app but after add predefined set nothing changes, in other words under the PIDS screen is still says normal instead of Custom. I have a 7.3 2000 model powerstroke. Any help would be great , Thanks
Having much the same problems as Milton is having. The Ford Dealer would only tell me that the #8 injector coded as the problem, after reading Miltons fuel filter problem wondering how common it is for the filter to deteriorate and cause injector problems, or if I have an injector problem at all.
Fuel filters don't just deteriorate. Change them once a year or every 15k only use Ford Motorcraft specific ones. As for the injectors if you download the Forscan app from the Google Play Store you can do injector buzz tests, cylinder tests among other stuff. The Forscan app is a Ford specific app while it's not free the apps benefits are worth the price I think it's around $5 I don't recall though.
THANK YOU FOR VIDEO Will you either demonstrate for me or tell me how to set up i.e. 2 graphs comparing o2 sensors 1 and 2 (only have one bank) so i can see if i have a bad cat. i have looked endlessly directions for doing things on torque and kind find them. I would like to set up couple of graphs and save them prior to pairing up the phone. i don't know if i have bad cat or bad 02 downstream sensor on dodge with 90000 miles. wish there was a pamphlet or active forum to get on.
Great info thanks i was looking all over for something like this.
Been using TorquePro for almost 3 years. Works great but a lot of initial setup. Got tired of searching for a reliable BT adapter. They seemed to not work far too often. Gave in and spent money on a high end adapter. Hasn't given a single connectivity issue.
+rts Which adapter did you go with?
carey lee It's the Kiwi PLX adapter. I paid $100. Pricey, but it was worth it. It has a long cord. Needs to be zip tied under the dash.
+rts Did you use this on a Android phone or tablet?
+carey lee android phone. Keep in mind this was 3 years ago, so there may be a better version available now.
The ELM327 now has a USB cable for windows PC. Looks like a great unit. In the words of Ron I'll be testing it shortly.
10:44 PowerStroke extra PID's
What?
@@swashington942 The extra sensors/readings you can read that the app doesn't load as part of the default set for the Powerstrokes.
Are you not selling them anymore? I cant seem to find the one that you are using.
Thank you .
curious if the app is updatable for feature vehicle specific code. The old styles used special circuit board keys you slide into the slots of the odb2 scan tool as well as cartilages now. The new ones must have a way to upgrade them thru an upgrade of apps or something ( i am guessing or are they going to be throw away after a certain period of time in future) . My other curiosity is if they have ELM327 bidirectional read/writters/flashers...like you can actually open vents , turn on compressors , turn on fans ,...etc as well as flash new wireless key codes to BCM , change engine performance values etc... :)
The app software is used to monitor stuff not do custom modifications per vehicle. You can do injector buzz tests and cylinder tests with the Forscan app it's a Ford specific app available in the Google Play Store.
How i can select One of the not green functions?
I Love you.
can you check fuel injector pressure for each cylinder? My truck is not pulling any codes but feels like kinda like a misfire. I have a programmer that was hooked up to it but since I have started having problems I disconnected the programmer.
Ron, what's the code for torque pro for an 05 F350 dually transmission temperature?
thank youfor your explictionappreciated
God bless
Hi dieseltechron ...can you do a video for a I phone.....please..!!!!! And also if you can tell me what is the best scanner (or program for a laptop)........to work on diesel pickups ......I looking for one but no sure what to buy......thank you appreciate..!!!
Typically the best OBD2 reader for a laptop would be a wifi one. Amazon has the ELM327 available with USB connection for laptops.
What should I read on my Ficm Sync? I am reading .6 2006 F250 sd 6.0.
Hi. Mine shows Transmission temperature NOT transmission FLUID temperature. Is it the same?
Rip Ron
such a great video. If I have a 2006 trailblazer, do i need to set up Pids and custom PID and what would that be for a trailblazer. Not sure where to search or find that info. thanks for making the video
i bought one of these and well when i plugged it in it gave me a tbc fault thing what should i do i got pretty scarted so i unpluigged it but now the trucks all fine
THANKS a LOT.
Tried to find you on Ebay to buy the Bluetooth adaptor and couldn't find you Ron
Ron passed away on May 10th, R.I.P
he left good things to people
R.I.P :(
I want to add high pressure oil pump reading for startup. How? please help
R.I.P
did any one have a hard time to get the ecu to work with your powerstroke mine will not work
Have you turned your key to the on position after being paired and starting the app?
vnmsenior I had to buy a better one the blue one didn't work
I got the ELM327 with firmware V2.1 and everything talks. Had Android 4.4.4 but flash my tablet to use android 5.1.1. The software seems to favor kernels that have better and more stable support for bluetooth.
Everything would work for a few seconds on 4.4.4 Kitkat but I heard Android 5 on up has better support and stability. I guess it depends on the hardware you use the android hardware/software and its compatibility with bluetooth
vnmsenior Who can I order the 327 from like you have ?
how to connect obd with ecu and show us how to set up an profile
Very cool
Hi Ron, does the torque pro app also do the injector buzz test on the powerstrokes (97 7.3)?
No buzz test or special test. Monitoring or pulling codes
If your looking to do buzz tests or cylinder tests download the Forscan app located in the Google Play Store it's a Ford specific app designed to run tests among other things. It's not free but the app is worth the cheap price for the benefits of the app.
I was wondering if anyone knows if the app is Android Auto compatible? Thanks
Does the Dash Boss read fuel pressure and egt's with the kit when used with a 7.3 powerstroke? I have read they aren't compatible with the older trucks with regards to egt and fuel pressure.
7.3 Powerstroke Diesel's don't have factory fuel pressure sensors or EGT probes. You'll need to buy gauges to monitor them. Glowshift gauges are decent quality for the price and work well for me. There's better more expensive gauges on the market available.
What will the van Ficm internal voltage drop to?