yeah..most of us do. i have seen the later generation escapes with rear fender well rust also. it seems to be a characteristic of the car, but if you don't have it yet, then you know that it can happen, so you protect the area now. another common and much more dangerous rust area is the passenger side rear shock mount, which can completely rust away and leave the top of your shock hanging free under there. it's so common that full replacement inner fenders are sold.
Gotta say, got myself an 07 zc xls escape and I've been looking around for anyone who's modded it. And honestly great job! It's so unique, I'm planning to do something similar down here in Australia. It to sure turn some heads ;) Once a again, props to you man. #maaadddd
я живу в Сибири, покупал форд маверик в салоне у дилера, в 2004 году летом, сегодня я наездил 210000 тыс км, в итоге он у меня 13 лет, добью до конца и сдам в утиль, автомобиль супер!!!!!
Are those rims {20" DIAMETER (20" x 8.5") [+32 Offset, 5x114.3 Bolt Pattern, 73.1mm Hub} or {20" DIAMETER (20" x 10.5") [+30 Offset, 5x114.3 Bolt Pattern, 73.1mm Hub} for the XXR 521's
Very cool man! I don't care for low riders but I like that yours is different. I used to have an 05 Escape and recently upgraded to a 2010. I live where it snows so I need ground clearance. lol But still, very cool ride dude. Escapes are very nice cars and you can do a lot to customize them. Thanks for the ideas.
Truly a clean build, I’ve got a 06 Mazda Tribute (same thing just others than cosmetics) but where would be the best place to find lowering kits and stances wheels along with wheel spacers
How much for all the modifications in total. I have a Ford Escape 2008 switching from a Acura MDX sport 02 and I was planing on starting fresh and wondering how much would it be for the ford
can you link where you got your headlight units??? i have an 03 3.6 v6 4x4 with led headlights, deleted exhaust, wide stacked all terrain tires and new american racing deep dish rims, getting fender flares and headlight units but i like yours a lot
I got an 06 hybrid that needs suspension work and I'm looking to lower mine. Any suggestions? Like brand of lowering struts and such? Different mods needed?
Sick build, I’ve gotta 06’ Mazda Tribute S. 3.0 auto and looking to do some cheap mods since it’s at 220k miles. Thinking of a doing a matte black finish body and wheels then a tan finish for the spoiler mirrors, and underbody plastics
hi and very nice escape. Here a 2002 Mazda Tribute 2.0 with 260K km :) and rock solid - with me since 2003, one of the few sold in Spain-. question, how do you lower the susp?.
This is the cleanest and sickest escape ive ever seen.,. Absolutely immaculate car... I like the extension in your front bumper that makes it more look lowered?.. What is that called and where can i buy one?,. Thanks for those who will answer...
I have 05 Escape V6 but my shift knob position at steering wheel side, not like you..are you V6 too? & i want lift up my escape not low..but hard to get the lift up kit, & i use Borla muffler no cat..sounds is pretty cool with stock headers
Eric Pfaff mariner owner here. No they don’t really make a lot of things for these cars best bet is to creep escapecity forums see what people used there
Damn, I was thinking about putting a leveling kit on my escape to raise the front end but idk now… I’m kinda thinking about lowering it…😅 I’ve got similar wheels on my Escape, they are black with the polished aluminum lip… That mf looks good man…
hi, can i have information about shops, where i can buy parts to modified my escape? i'm in italy and this research for me is very difficult, so please help me;-) thank's so much
Those head lights tho... and they only make those spec-D for 05 and up ...and just my luck cause I got an 04 lol. Although they can physically fit perfectly.. the wiring is different... dam... the headers are a good upgrade from the oem cat/manifold but in California it would be too much of a risk imo.. but magnaflow has a high flow stainless steel cat/manifold that's c.a.r.b legal and it's pretty good if looking for "legal performance"(I hate that term). I'm I California tho and c.a.r.b sucks with all its regulations..
This is the same kinda @ss clown that told me I couldn't hot rod a 69 Rambler American inline 6 cylinder back in the day. Three ways to make a car go fast. Cubic inches. Cubic money. Or cubic brains. I mostly had brains and a little money. It was quick, handled like a slot car, and a TOTAL surprise!
I've got an 04 escape with aftermarket rust on the rear fender
LCH_Entertainment same but mines all under too
yeah..most of us do. i have seen the later generation escapes with rear fender well rust also. it seems to be a characteristic of the car, but if you don't have it yet, then you know that it can happen, so you protect the area now.
another common and much more dangerous rust area is the passenger side rear shock mount, which can completely rust away and leave the top of your shock hanging free under there. it's so common that full replacement inner fenders are sold.
My 02 escape came with the factory exhaust leak
My 03 had a fluid leak because the brake lining was rusted
I have a 2006 Ford escapeimited and I want to make it faster
Thumbs up if you want him to make it turbo!!! He has all the supporting mods already! It just might be the fastest Ford Escape on a drag strip!
not anymore 😈
Sweet ride i gotta 02 escape xlt not many people appreciate escapes like this keep up the good work
I agree with u
Gotta say, got myself an 07 zc xls escape and I've been looking around for anyone who's modded it.
And honestly great job! It's so unique, I'm planning to do something similar down here in Australia.
It to sure turn some heads ;)
Once a again, props to you man.
#maaadddd
i love this car. its the most durable car ive ever owned.
Same here I beat the living piss out of mine and it just don’t give up
Have a white 06 & yours is super low key sharp..✍🏻✨
я живу в Сибири, покупал форд маверик в салоне у дилера, в 2004 году летом, сегодня я наездил 210000 тыс км, в итоге он у меня 13 лет, добью до конца и сдам в утиль, автомобиль супер!!!!!
Yoooo I had no idea an escape can look so fresh 😮
I’ve Got ‘01 V6 XLT Escape With Redneck Carbon Fiber, And I’ve Been Looking For So Long For Someone Who’s Modded An Escape
Modded mine 2
dude i love ur ford! i have the 2005 v6 and is my favorite car in the universe!
Bro I got a 2004 Ford Escape it got a abs and a check engine light and it still drive
I have a 02 escape 5 speed and I love it. I'm doing mine one of a kind to. good for u man looks great
Are those rims {20" DIAMETER (20" x 8.5") [+32 Offset, 5x114.3 Bolt Pattern, 73.1mm Hub} or {20" DIAMETER (20" x 10.5") [+30 Offset, 5x114.3 Bolt Pattern, 73.1mm Hub} for the XXR 521's
man, where did you get the parts to get the ponnies out of the engine. I need extra HP on the wheel to pull my 5x10 trailer with no hazle...
Cleanest escape ever!!! Great job keep up the good work👏👏👍👍👍
I didn't realize how fast this model was until i checked the stats. I want to mod one now
Awesome dude.. From Jakarta indonesia 👌🏿👌🏿
Bruh I’m now instantly in love with what’s to come 🙈 can’t wait!!!
Awesome ride!! Keep up the great work.
Very cool man! I don't care for low riders but I like that yours is different. I used to have an 05 Escape and recently upgraded to a 2010. I live where it snows so I need ground clearance. lol But still, very cool ride dude. Escapes are very nice cars and you can do a lot to customize them. Thanks for the ideas.
Where'd you get that grille from?
Truly a clean build, I’ve got a 06 Mazda Tribute (same thing just others than cosmetics) but where would be the best place to find lowering kits and stances wheels along with wheel spacers
Nice Escape!.... I have a 2006 as well but it doesn't run like yours! Great video too....
You get it fixed Richard?
Those Escape V6's put out some nice HP's stock. I have one.
How much for all the modifications in total. I have a Ford Escape 2008 switching from a Acura MDX sport 02 and I was planing on starting fresh and wondering how much would it be for the ford
What are the dimensions of that wheels? I want to buy those for my escape.
Me too did you find out ??
@@jimmyeastwoodjonnyfleeeast1578 Same here
Still have it? Got a 05 Hybrid in August.!! Same color.
not sure that was my buddy maxx
Good looking escape. It's different I like it.
That’s exactly what I want to do my escape what kit did you get for that?
where did u get those headlights? my fiance is wanting to make her escape stand out with different lights and cant find any decent ones.
Mine stands out hehe mines changed dpending on lighting
He deleted the cats? Did he have it reprogrammed or tuned?
where did you get all the parts
can you link where you got your headlight units??? i have an 03 3.6 v6 4x4 with led headlights, deleted exhaust, wide stacked all terrain tires and new american racing deep dish rims, getting fender flares and headlight units but i like yours a lot
Any pictures?
What size rims do you have
Hey I'm too from South Carolina and i too have a ford Escape
I got an 06 hybrid that needs suspension work and I'm looking to lower mine. Any suggestions? Like brand of lowering struts and such? Different mods needed?
where u get ur headers looking for some for my escape
friend can you give me a list of the modifications you made to the car I would like to leave mine similar to yours
Sick build, I’ve gotta 06’ Mazda Tribute S. 3.0 auto and looking to do some cheap mods since it’s at 220k miles. Thinking of a doing a matte black finish body and wheels then a tan finish for the spoiler mirrors, and underbody plastics
hi and very nice escape. Here a 2002 Mazda Tribute 2.0 with 260K km :) and rock solid - with me since 2003, one of the few sold in Spain-. question, how do you lower the susp?.
Dude thats bad ass I'm just starting to mod my 06 escape
Did it last, or did it kill the transmission?
what are the headlights name ?
Whats the stay high remix? I gotta find this
This is the cleanest and sickest escape ive ever seen.,. Absolutely immaculate car... I like the extension in your front bumper that makes it more look lowered?.. What is that called and where can i buy one?,. Thanks for those who will answer...
Theres all types out there mine is the same way
What wheels are those?
How did you lower it? I have an 05 I wanna lower
Cut the sprins
I don't like the rims exactly, but everything else is awesome. It's hard to turn an SUV into something... cool, but you did it
Сan you tell me the parameters of the disks and tires? Size, span, width.
What headlights are those? I have a 2002 Escape Xlt and i cant find any halo/projector aftermarket headlights..any website suggestions?
J Lawx28 you'd have to modify to 05 and up headlight assemblies
Nice very nice.
Where do you get your offset wheels from ???
I have 05 Escape V6 but my shift knob position at steering wheel side, not like you..are you V6 too? & i want lift up my escape not low..but hard to get the lift up kit, & i use Borla muffler no cat..sounds is pretty cool with stock headers
What kind of spacers did you use for the wheels
Please tell me how you did this exhaust? What set?
Where did you buy those headlamps
What aero exhaust is that? Is it just the muffler or a whole kit?
does the original cluster light. just bought one
Hi there, can u please tell what kind of rims are those or brand of rims plz
Wheels 18?
Man Ive been trying to find cat delete headers for a 2.3 escape for a while now.
The wheels fitment looks really nice, any problems with tries rubbing?
What size tires are those?
what springs are you running?
Where did you get the headlights at
What is the exhaust you use for your ford?
Nice car and i like
Hi Max.. how much did cost u to lower the Ford Escape.?
Where you get the bumper from
I love the stance
where did you get the headers? I have the weapon R cold air intake... just want headers to remove cats now
Msds, In California.. it's like 10 miles from where I live.. but I'm pretty sure they can ship em to ya..
Very good car
Hi, could you please tell me the size of the wheels
hey, i have 2006 escape too. 3.0 xlt can you help me? where can i buy front bumper spoiler?
+Mamuka Tevzadze He used the front lip off of a year model new escape
I like it. I have a mariner I'm gonna do some of that stuff to. Do they not make a cold air for these rigs?
Eric Pfaff mariner owner here. No they don’t really make a lot of things for these cars best bet is to creep escapecity forums see what people used there
I really like it. You've done a good job. Very tasteful. And lowering it really works. Must make you happy to drive it. How does it corners?
What’s this song?
What is the suspension?
I’m inspired !🤩😆
What wheel and tyre size please?
how much hp it add after mod?
i really came here to modify my subdash for a touch screen radio but this car makes my 2005 ford escape look like what he it can look like fully fixed
podemos saber que tubo de escape o sistema usas,
Escape looks great. One of the best i've seen. What wheels are those? What is the offset. Are they 20's?
Wondering if you could list the parts that you used, also are you still on ig ?
Damn, I was thinking about putting a leveling kit on my escape to raise the front end but idk now… I’m kinda thinking about lowering it…😅 I’ve got similar wheels on my Escape, they are black with the polished aluminum lip… That mf looks good man…
got a link for the parts?
hi, can i have information about shops, where i can buy parts to modified my escape?
i'm in italy and this research for me is very difficult, so please help me;-)
thank's so much
is this video from 2002??????
Super
how many horsepower has it?
the exact same he started at unelss you burn more fuel
Not much you can do with these so 10/10
I guess my parents are the only ones the own a manual Ford Escape bro I’ve yet to see another one
What’s the hp?
Those head lights tho... and they only make those spec-D for 05 and up
...and just my luck cause I got an 04 lol.
Although they can physically fit perfectly.. the wiring is different... dam... the headers are a good upgrade from the oem cat/manifold but in California it would be too much of a risk imo.. but magnaflow has a high flow stainless steel cat/manifold that's c.a.r.b legal and it's pretty good if looking for "legal performance"(I hate that term). I'm I California tho and c.a.r.b sucks with all its regulations..
Nice. Next step is Forced Induction 👍
I have a 01 straight piped black rims and a brush guard with a light bar on it
What are your wheels specs?
Good job man
That is fire ! OML
Wheel spacers - dimensions? Nice work Looks good.
This is the same kinda @ss clown that told me I couldn't hot rod a 69 Rambler American inline 6 cylinder back in the day.
Three ways to make a car go fast. Cubic inches. Cubic money. Or cubic brains. I mostly had brains and a little money.
It was quick, handled like a slot car, and a TOTAL surprise!
Sad he totaled it. Cant wait to see what he does with the next one
How did you lower it?
+leonardo naula coil overs I think
+Pat. D. I can't find coilovers for my escape. ..all I found was lowering springs
I'll ask the dude when I see him
+Pat. D. ok thank you bro
It's custom work!