Be sure to remember this Tip from Experienced Plumbers! Few people know this technique.
Вставка
- Опубліковано 21 чер 2023
- Be sure to remember this Tip from Experienced Plumbers! Few people know this technique.
#shorts #plumbing #diy #usefull #ideas #lifehack #homemade #diycrafts #tips #tricks #plumber - Навчання та стиль
New tip -> ua-cam.com/users/shortsh8j_AnCTgXA
Pésimo tu consejo, jamas se debe raspar una rosca
I'd sooner test my gas line with a lighter
Pooo....
😊😊😊
@@TheJoshissaxy that’s funny you say that…….. that is how you test newly installed gas lines for leaks.
I think they hired this guy to build the Oceangate submersible.
Bruh your cruel🤣 fuc it tho
😂😂😂
Yooo😮
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Ah brother u sank to a new low
Pipe tape is 98 cents
I recently bought 2 for 98 cents
Literally lmao
Teflon is generally fine until the nut is moved slightly. In such circumstances, hemp swells as a result of the (liquid) leakage weep, and reseals. Teflon leaks.
@@Gottenhimfella that's why you use the Teflon. Put a dab of pipe dope and never have to worry about it
*Thread Tape
Когда затягиваете гайку ключом, необходимо 2-ым ключом в обратном направлении поддерживать вентиль, чтобы не сбить подмотку вентиля и не сломать вентиль !
Та нах.надо,и так сойдет😂😂
А что за вазелин они используют или какую можно использовать в этом случае?
@@albeck1329тоже заинтересовало, думаю это герметик. Аналогичный ABRO красный использую в ремонтах разных
@@albeck1329пасту юнипак купи, лучше этого красного варенья, только тянуть сильно нельзя - порвёт воротник
@@albeck1329 похоже на фиксатор резьбы или анаэробный клей герметик.
При этом "правильном" варианте намотки потечет с шансом 80%. Чтобы не потекло, нужно мотать раза в три больше и помимо укладки пакли в витки резьбы, нужно еще немного мотнуть сплошняком. При том, обязательно мотать конусом: к концу - меньше, а к основанию резьбы - больше. Тогда, вот это увеличенное количество пакли у основания будет хорошо обжиматься резьбой, давая гарантированную герметизацию. Насечки же нужны, чтобы пакля не съежжала по виткам резьбы при закручикании, чего в данном варианте достигнуто не будет, потому, что вся пакля уложена в витки резьбы и практически не контактирует с вершинами резьбы, где расположены эти насечки.
Автор видео, явно, себе сантехнику ни разу в жизни своими руками не делал. А без объяснений, что, как и зачем делается, ролик абсолютно бесполезен.
Сказал как отрезал 🎉
Но при этом он ещё герметиком промазал резьбу!
@@user-kn9fn9ff1w герметик, сам по себе не герметизирует. Он не способен держать высокое давление. Его основное предназначение консервация пакли, чтобы она не сгнила за несколько лет.
Иначе бы все без пакли собирали. Промазал резьбу герметиком, закрутил и готово.
Видели таких сантехников. Намотают пакли и газовым ключом закручивают. Потом гайка лопается ночью и привет соседям.
@@chezelenskiy4339не, ну если используется анаэробный герметик, тогда лен не нужен.
Teflon tape left the chat
i think this is better than teflon :D
my teflon tape rusted along with a piece of pipe and broke off
@@chesnok8358Your Teflon tape rusted...? The tape...? Surely you only mean the pipe rusted
@@colebyrnes7889Jesus Christ how have you made it this far through life without fuckin knowing a joke when you see one??
@@chesnok8358what you do with not rusted taflon tape in a broken rusted pipe?
You know, experienced plumbers are usually aware of the existence of plumbers tape.
Так лен с герметиком все равно лучше ленты держит
I guess you talk about teflon, i find way less reliable, in my country teflon is available but its considered "bad work"
I don't know how to name it english but the thing he use in the video can last for decades, its not a grandma medecine caming form nowhere, its a real "tool", way better than teflon to me
@@user-dk1fj3pe5bno
@@user-dk1fj3pe5bdo you expect this to last forever? This jump makes repairs harder.
Yeah but I'm old enough to remember hemp and really, it was a better joint
Вот не знал я в далёком 80-ом году , что нужно что то там пилить , какие то насечки... На практике контрогаили систему отопления в домах на стройке, девять этажей 36 квартир , в каждой минимум 4 батареи , верх стояка и низ на батарее ... И так всю практику... Намазал суриком , подмотал лён , под контргайку канатик если есть , а нет то лён сворачиваешь в канатик и вуаля... Тогда фумки не было , всё делали льном , оказывается не правильно делали))) Только до сих пор всё работает с тех древних времён)))
Хех...я газовщик,разбирая старые резьбовые соединения часто встречается лён с краской или суриком в вашем случае.
Такое соединение никогда не "бежит",разобрать тяжело настолько плотно держит.😅
Не то что сейчас сажают на герметики и пасты,чуть стронул и всё...утечка😂
@@drug.cheloveka а теперь ты свошник и тебя в скором месяце посадят с утечкой
Или краской баловались-это ваще тяжко разбирать....
Лён в данной ситуации намного лучше. Мы на крупных трубах всегда используем лён, подозреваю что из-за цены, да и вообще ленту туда мотать- бред. У льна хороший предел юстировки, к ленты она отсутствует
В далёких 80х, Вы работали с фитингами из ч/б металла и чугунными батареями, там резьба - это сплошные насечки и заусенцы. А в современных, латунных фитингах насечки нанесены заводским методом, а бывают фитингы без насечек, с идеальной, "гладкой" резьбой - вот на ней и надо делать насечки, иначе пакля "ёрзает"и не получается выполнить надёжное соединение. Если сделать грамотно подмотку паклей, то никакой "Сурик" не нужен, сейчас есть специальные пасты - узлы герметичны и раскручиваются при ремонте легко.
Ох уж эти дети тиктока😂 в училищах не учились, но кого-то учат😂
это паста.
Томатная @@user-mc4lm2cj1j
That moment when your plumber whips out the tomato purée.
🤣🤣🤣
I though it was strawberry toothpaste
Red but not made of tomato derp
Now I know why they always turn up and say I ain't got that part il be back then you don't see them, tesco must have ran out of tomato puree
@@batman-zn2dpMust've hurt your vegan butt
I always make the threads just barely work with every job I do. It's a really great technique to use if you want the threads to just barely work
Yes it guarantees you will be called back to do more work in the future 😏
Lol you’ve clearly never done plumbing. We scratch the threads with a hacksaw blade or else the fibres will slip and bunch together and the join will leak. He didn’t use enough fibre but he had the right idea
@@lukevincent8564 non plumbers are the best content on plumbing videos
😂
@@lukevincent8564
That's what happens when you upload a video and just say "hey don't do this" and don't explain shit.
К сантехнику прикрепили практиканта. Вызывают на выезд. Приезжают. Канализационный люк. Из него течет дерьмо. Сантехник подходит к люку и ныряет.
Через минуту выныривает, кричит:
- Ключ на 19.
Снова ныряет. Через полминуты выныривает:
- Прокладку No.6.
Опять ныряет. Выныривает:
- Выходит, отряхивается вытирает говно с лица, стряхивает с уха презерватив. Закуривает и говорит практиканту:
- Вот так!.. Учись, студент! А то так и будешь всю жизнь ключи подавать...
😂 анекдот с советских времён
@@user-uv4yd4eh4i ну сейчас в таком случае происходит дележка бабок 90% бывалый +чаевые от хозяев, а практикант все таскает за остаток,да не пыльно, но в кармане не густо
Борода бородатая
Знаю анекдот. Когда экзамен сдавал на сантехника, экзаменатор рассказал 😂
@@nilwendilу нас с вами видимо был один и тот же экзаменатор.😅😅😅
Всё бы ничего, но силиконовый герметик недопустимо использовать в этой ситуации. Только паста для льна.
p.s. Анаэробный герметик тоже не используется со льном.
Они используют красный автомобильный герметик
Я всегда слюнями плюю и размазываю. 😂
соплями надёжней
Почему силиконовый нельзя ?
@@user-je7cs9ow5u потому что он склеивает волокна льна и лён уже не работает. Он является только наполнителем. К тому же уксусная кислота, входящая в состав герметика, разрушает металл.
Someone should make a product for this like a really thin tape like material I bet it would be very successful
Like Teflon tape😊
🙄
It exists and is called plumber's tape.
@@thefinecolumbianthat was the joke…
LOL
Dude's plumbing like it's 1899
😂👍✌️
Its still standard in Europe.
@@fiskertoon That "standard" is some 3rd world, 1800s, crazy shit.
@@2011bluemanbut hemp will work for ever if you make this correct
@@2011bluemanits still standard in finland and we are not 3rd wolrd country last time I checked
I used to do maintenance on submarines that rich guys went for trips on until the business imploded on us. We did all our pipes on the subs this way for years and it only malfunctioned that one time.
😂
It only takes one time- Titanic
Lol
I can only talk from a german plumbers perspective. I have been working 7 years in plumbing now and these ball valves are used exclusively for central heating here where its still allowed to use hemp for connections. For drinking water however it is not allowed since it "can be" a breeding ground for bacteria and other nasty things. We have to use alternatives for drinking water however in my own humble opinion. I think hemp is better because it swells up in contact with water, sealing the connection even further. In my career i never heard of anybody ever getting sick because the consumed or came in contact with water that came from a pipe fitted with hemp 🤷♂️
Yes my friend, you described everything correctly!
I am German, too, and in our house, build in 72, they used hemp. Nobody ever got sick because of it and we drink tap water.
@@karlashmeedavlasta6365 Yes, that's right👍
@@Simple_Creative Maybe add some captions explaining it next time? From the perspective of a country where gas pipes are very rare except in some restaurants, this sealing method for gas pipes looks really bad even if it is within regulations for gas pipes.
@@Simple_Creativestfu u don’t know Jack stuff
You should definitely always 100% of the time, mar and chew the threads on any water tight fittings. This will ALWAYS prevent leaks and is definitely the right way to do that.
You should just remove the threads, tie less threads you have the better
@@Barzxin fact, get rid of the water. No water, no possibility for leaks. Think about it
@@WillFast140 the smartest move. 🧠
The friction of the water will seal it!
The best part is he then scrubs his fingers in the filing-laden threads, haha
Also aufrauhen ist richtig. Aber aufhanfen fängt man von vorne nach hinten an. Nicht umgekehrt wie hier. Der Hanf soll sich rein drehen nicht raus. Und nimmt nicht das billige rote sondern das FERMIT das weiße. Das könnt ihr bei Wasser Heizung und Gasleitungen nehmen und seid immer gut gerüstet.
Danke für deinen Rat. Es ist sehr nützlich 👍👋
Трубная резьба изначально идёт с притупление,что бы имели место быть полости для уплотнителя (лен,аэрофобный гель)
А кетчуп зачем?
I've worked in the oil industry building all kinds of production equipment for over thirty years....thousands and thousands of threaded joints on the stuff we built and not one joint got tortured with a hacksaw blade before it got taped, doped and torqued.
But a youtube video gave you a tip, clearly whoever made this video has more knowledge than 30yrs of work experience lmao. Most of these "tips" or "life hacks" are ridiculously stupid and pointless
I’ve been a residential plumber/service plumber for 6 years, trained by my father a 35yr master and neither of us have ever seen something as dumb as this “tip” thanks for this great input as well. I had a laugh
@@WhyteBoyde ya mean you didn't learn this during your apprenticeship??? Figured it'd be the first thing ya learned lol
I worked as a plumber for Czech Republic Navy and this method of scratching thread is the only proper way which everyone here is using
@@Kawka1122sono perfettamente d'accordo con te e chi dice il contrario non comprende nulla di idraulica
Qualified plumber and gas engineer here. Use PTFE tape like building regs tells you too.
No. Use Hemp and Fermit creme because our grandfathers did so.
forever Chemicals
They dont tell you to do that in most of the world.
Its steel fittings
Not brass
I imagine this is not a commercial place
Used plenty of hemp and boss white when doing the fire sprinklers
not use ptfe tape for a hot water
Сагласен, мало кто знает эту технеку. Это сторинный спосаб тебетских манахов, перидаваимый патомкам тысячилетеями в стражайшем сикрете... Спосибо бальшое, теперь мая жызнь не будит прежний
Учи русский!
@@Leonid-cs8gi У миня савецкое аброзавание, так что не надо
Детский крем обязательно красным цветом должен быть ?
Можно зеленый
When you go to the grocery store instead of the hardware store…
"Hardware"
Harris teeter and foodlion sell tephlon tape.
That got a laugh
Yeah, is that celery fibers?
Clearly not groceries, but good joke i guess?
Everyone should perform plumbing like it's the 1800's.
why is that wronng? this is 200 procent better then shitty plumbers tape
Hemp will literally last 100 years. Why tf you want to use that plastic tape shit. Jesus. American plumbing is cave man dog shit
@@HellforsaA) you buy shitty tape you get what you paid for
B) marring the threads is the absolute worst thing you can do unless your plan is to keep charging your customer for leak repair.
C) hemp decays way faster then dope or Teflon
@@Doc_Paradox are you a plumber? i am with 9 years in the trade. marring the treads do nothing towards the fitting integity, using a saw blade it totally okay. hemp is not decaying fast, here in sweden you can still find heating and water lines that are 80 years old, still no leaks on the hemp, with only linswws olil as a sealer. the paste we use in sweden is even better then linseed oil.
in sweden teflon tape is only used for hobby plumbers and sprinkler jobs, teflon is not used in swedish plumbing. its either hemp or thread locker
@@Hellforsa 26 years and own my own business. I'm going to go out on a limb and say that you aren't licensed. Any plumber worth their salt would know. Marring threads ruins the integrity, let alone making them harder to thread. Hemp paste is only rarely used in steam applications. Even then there are dopes that are way more efficient and less caustic. You wouldn't dare use paste and hemp on drinking lines. Again, you're thinking of cheap hobby tape when it comes to your interpretation of Teflon. The rest of the world moved on from medieval plumbing. I get guys like you still claim that brass should have lead in it because it's easier to use. There is a reason why we moved on from using such techniques.
The old school way, reminds me of my father, a cop and a plumber, RIP dad 😢.
*TO EVERYONE TALKING ABOUT PTFE TAPE* this is a much better joint, because the organic hemp expands with water, so it's a self ceiling joint.
The tendency of tape over the years is to leak, the tendency of hemp over the years is to become MORE water tight.
Exactly👍❤️
Sad that you only at this point have 9 upvotes but all the sheeple upvote the comments that are the opposite of your spot on message. Guess that's why we are where we are as a society at this time.
@@MeeSanFrancisco In the West we are taught to laugh at and mock other cultures as being inferior to our own, and to be honest I was as bad as anyone. Until I moved to the former Soviet Union and realised that actually they were not backward. They just had a different philosophy to us in the West.
The irony is many in the West are now screaming for the "right to repair" - repairability was built in as a key feature of everything in the USSR.
Just because something is done differently does not mean the people doing that are thick. But that was the story of the cold war. And its stuck with us in the west.
I'm not a Plumber. I thought it was Round Hay Bail Twine or Jute.
Where the heck do you buy the hemp?
I haven't seen a plumber use anything but pipe dope, or Teflon tape, since before I went to high school. And I'm 65.
Hanffasern verwenden . Die quellen bei Feuchtigkeit und dichten besser ab .
This is most likely in asia or india you know their houses probably made of sticks and mud
@@konradschroter4071maybe that's what pipe tape is. Anyone know what it's made of. Or maybe plastic like everything else we use.
Facts...this must be some 3rd world country technique
@@prynceal6762 ?
This is actually an Expert Plumbers Tip. People in the comments just don't understand it's value! It's designed to ensure the plumber has work in the future replacing this connection.
Thanks 👍✌️
😂
Underrated comment 😂😂
@@Simple_Creativer/whoosh
So, planned obsolescence?
А вы никогда не задумывались: для чего нужен лён? В принципе лён, в случае небольших протеканий, впитывая в себя воду разбухает и плотно герметизирует саму резьбу. Учите матчасть!!! 😂
Нехера он не герметизирует.Если протекает,все,заново надо обматывать.
@@user-me6nb6kl3wэто больше к тонкой фум относится
А з яких це пір почали використовувати льон, замість пеньки?!...
@@vladimirvlasov5576 да это одно и то же
ЛЁН ТАКЖЕ ПРИМЕНЯЮТ КОГДА БОЛЬШАЯ ТЕМПЕРАТУРА НА ХОЛОДНОЙ ПРИМЕНЯЙ ЧТО ХОЧЕШ
Силиконовые герметики на уксусной основе нельзя использовать на питьевом водопроводе!
If you see your plumber doing this instead of doing it the right way fire them and find someone else.
Edit: since certain people don't understand, here in the states we have tapered threads, pipe dope and teflon tape tend to do the job just as well if not better. Wicking is still done but not on such a small brass fitting here.
大文字必要です（
@@user-dq6jf6hv5dYou trying to give English lessons in another language?
This is the way it's done in a lot of places and it works great
@@Thatoneguy-ro1sjDudes saying the entire sentence should be capitalized because it's accurate 😂.
@user-dq6jf6hv5d uppercase is only required when talking to an adult during a formal weekday. Unless you have more money than them, then its not required. Learn your English
Всю жизнь, намотал, поплевал и закрутил. Всё! Стоит на века!
Новое поколение, им нужно обезательно помазать .
А потом трубку не берешь или номер меняешь?
I love the part where they explained all of the things
Straw and tomato paste 😂
ì love how degenerated this generation is, without instruction yournot even abel to take a proper poop session.
Hemp and seallant 🙄🙄🙄🙄
Сейчас на качественной сантехнике резьба уже порченная
Да, верно👍 Но увы, не вся она качественная продается🤗
первый способ работает на 100%
Нет,лен скатывается
I tore apart a tank built 120 years before I was tasked to tear it apart. Every joint was sealed with hemp, like you see here- except they would put a light oil on the hemp and brush it into the threads with a steel wire brush. Every one of those things was still good. The tank rusted through before the hemp gave way.
I see a lot of negative comments from people who seem like they think that they know "so much better", kind of funny to think that they are probably also the 90%(or whatever the percentage is) that put themselves in the top percentage of the best drivers.
@@douglasmatheson403the plumbing supply stores in most people's areas don't sell hemp fibers. They are also the last things I would ever use. Maybe if the world went through an apocalypse and teflon tape had to be reserved for more important plumbing
@@douglasmatheson403sounds personal
Survivorship bias. The ones that failed had them replaced decades ago.
@@douglasmatheson403anyone who thinks they’re a good driver definitely isn’t, especially if they’re young.
I don’t have hair so I’ll just use pipe tape. Thanks anyway
Make sure you score the threads!
you're hairless?
Thanks for the additional PFAS in the water ...
That's hemp.
@@ppaofe whatever
-Фум-лента...?
-А не, не слышал..
😂
Got to love that 1912 horse hair tech.
Stranded copper wire bruh
Or hemp fibers 🤔
@@staind288yeah,it's cannabis 😆
@@staind288definitely not stranded copper wire
Hemp man in a pipe
I think I'll just use some thread tape, and let my horse keep his tail !!!!
😅😂😂😂 hahahaha
💀💀
😀🤣😅
🏆 Best comment. 🏆
Por si no lo sabías eso no es pelo de caballo es fibra de cáñamo
🐴 Much appreciated 😂😂😂
WARNING!! This is NOT how to do this!!!
I use freshly plucked pubic hair it thicker and stronger.
No need to score the thread, just hemp and compound.
In Germany we still do this. Some plumbers use teflon, but most use hemp fibre
Thanks 👍
da sind wir doch schon längt weg davon, wir benutzen Dichtfaden wie Loctite und zum Teflon????ernsthaft das kennt doch heute keiner der jungen mehr
but not allowed on drinking water lines anymore, only Teflon band nowadays
@@mannmanuel7762 in Deutschland hat zb Loctite 55 eine Zulassung für Trinkwasserleitungen also bei uns keinerlei Problem
@@cf8651 Weißt du zufällig wie diese rote Paste heiißt, die zum Schluss aufgetragen wird?
It's the guy who built the ocean gate submersible
It's the guy who copied top comment
Stolen comment ass boi
We always use hemp, also with 3" and 4" pipes. But you should start from the front with the winding. Start from the back, crossover for half of the pipe to the front and start winding. And we use not the tomato saus but linseed oil.
We use that for oil, paint, gasoline, diesel, water and more.
автор совсем не знает особенности растительного сырья. Впрочем, обезьяна тоже не знает особенности гранаты)))))
I'll keep this in mind for when I'm in a situation where for some reason I have random fibers and threadlocker instead of the fucking dozen other options
😂😊👍
It's stranded copper wire
🤣🤣🤣👍🏿👍🏿👍🏿
It's hemp...
Just move to China lmao this is basically just communism in a nutshell
So many ignorant people here.
Hemp sealing is a perfectly viable method, that produces extremely strong and durable seals.
It's in wide use in Europe, and is legal for potable water and heating lines (water filled radiators and heating floors).
It has to be used with a compoud that greases the thread, to allow the coupling to rotate. It is usually linseed oil based. You have to use special kinds ,of compounds for special uses like solar systems based on glycol.
Hemp sealing is, in many ways, superior to teflon, it is extremely durable and "locks" the fitting in place much better than teflon would ever do. It also is natural, and costs almost nothing (such a shame bfor not giving cash to the big corporations, right?). It has to be done properly though, and require technique and knowledge, wich many here seem to lack.
Take this video as an opportunity to learn. The world is vast, and doesn't revolve around what you already know.
You are 100% right 👍🙏❤️
You are right ! Holds better ! Besides with PTFE fittings unscrew easily Can be a problem with faucets, valves..
Doesn't the hemp itself seal fine?
Your points with hemp being natural and not giving money to big companies are valid, but what about this paste?
except the fact is not a hemp but a flax
It's not about hemp sealing but about destroying the thread and recommending such destruction as a "tip".
Не правильно. Наматывается по ходу движения гайки. Т.е., от отверстия по часовой стрелке.
So, in what situation should we use sound effects?
The editor: Yes!
As a certified plumber that has been active in this industry for almost 10 years, recognized twice on the Plumbing and Fire Sprinklers Award (Directed by Fair Work Ombudsman) both in the year of 2020 and 2022, and with hundreds of costumers satisfied by the excellence of my work, which I always pursue, I can assure you that it is, in fact, a pipe.
Having done an apprenticeship through local 130 out of Chicago I can confirm this man is correct. It is in fact a pipe.
Having no experience in plumbing and bekng a simple day to day civilian, I approve of your message and Im in deep gratitude to be aware that the object present in the video is in fact a pipe.
It's definitely a pipe, and I think I saw threads before they were galled😂
Have you really managed to satisfy costumers? I find them to be an ornery bunch...
Thats a valve...
Iso se fazia antes da década de 80. Depois inventaram o veda rosca de pvc. Antigamente usava estopa com tinta.Sucesso a todos!!!
До сих пор это делается
Judging from comments, it seems people in plumbing and teaching industry dont usually agree with their colleagues.
When your client says they want to use as much natural supplies and limiting the amount of plastics in their project😂
That red thing looks like very natural
@@user-sh3qk4kw5vStrawberry pureed paste 😋 🍓
Homeowner wouldnt know the difference between low plastic usage and a hole in his ass
Hemp actually works better than thread tape. When water gets into the join the hemp will actually swell with the water making it block more
@@OnionMan560My brother's a plumber and said the same thing. His work place only uses hemp.
If I’m ever pipe fitting on a deserted island I’ll try to remember this technique
Cast away
De tom Hanks
Jajaja
🤨🤔🧐😂😂😂😂🤝👍💯✌️👌
That was literally what I was thinking like if the world ends I’ll use this. Then he uses what looks like loctite anyways. Why tf would you even bother with the hair then.
Lol I was thinking the same thing. Like where in the fuck would you ever need to do this in real life unless u lived on some deserted island. 😂
Yes, this would be great to do on a deserted island when you need to do plumbing work. Best thing is, you can source this material locally from coconuts and horses. It is practically free if you can climb well or run really fast.
@@Bankable2790it's not hair! Lol wtf? It's a product for plumbing
At this point I don't even think I'm living correctly 💀
Х/З. Всю жизнь собираю на лён,без ножовочного полотна. Всё good!!
90% of this comment section is not aware that hemp is often used for plumbing
Hell most of us are wondering what material he was used. But thanks for the info
Not anymore it isn’t 😂
@@ThanksHero come to Europe you will see Teflon and hemp are used in equal amounts. Hemp is way more heat resistant then Teflon and also less likely to be used incorrectly plus it’s a natural product
Was that hemp & red Loctite? Is that normal?
@@Jonasmonasonas Teflon has much greater heat resistance.
Always make sure to put grooves in the threads in a plumbing fitting.
Claro si quiere tener fugas 😂😂😂
Big brains time
i do it to light bulb sockets too
Поясните , для чего?
Everyone mentioning the grooves in the threads is so unbelievably stupid. You actually don't know what seals a thread. You realize that, right? Of course you don't. None of you do. You think the edge of the thread seals it? LMAO
После таких сантехников гайки с кранами не открутишь потом, либо срезать, либо отламывать
Эпоксидкой забыл намазать!!!!😂😂😂😂😂
Old fashion, but stronger than pipe dope and tape for sure. I work with 60-70 year old piping and I’ve perfected cutting fittings off because a lot of times you’ll crumble the pipe before you’ll break this type of seal😂
Who cares? It all works if you apply your product correctly. This is a waist of time and money.
@@airprok8328well obviously you care.
Okay. But why use red loctite?
@@airprok8328*WAIST*
GREATLY disagree with you. It lasts MAYBE a month, and then you're going out and ORDERING parts off of Amazon because this backwards country doesn't have any REAL supplies...
We done that when I was an apprentice plumber back in the 70s
You "done" that?? Ha ha ha! Watch your English! It's "we DONE DID that."
Lol key word is "Was" 😂
@@ThatOne77 What you done talking about?!?
Improvise adapt and overcome. It reminded me of oakum at first. Then I thought maybe he's doing it for the antis seizing properties this would yield, or tighten up a loose fit due to worn or improper thread pitch? No doubt there are other ways to everything, just like skinning a cat. The right or wrong aspect of this is subjective considering we don't have the luxury of the objective.
A lot of good stuff has been introduced in 50 years.
What does a bald plumber do..... I like the sound effects better than the tip........
Great plumbing technique
Thanks 😊 I'm glad you liked it 👋❤️
The comments just made my night ❤ thank you guys 😂
When you’re a plumber and have a horse’s tail you know not what to do with it.
I was wondering what that was. Maybe he has an old violin bow…
@@desertrobin3o its hemp rope untwined (oakem) usually its used to pour lead and seal old style cast iron fittings my dad tsught me to pour lead in the 90s before everything went to PVC
Quelle est cette pâte rouge ?
@@beatriz262 c’est un mastic pour des tuyaux de plomberies
@@jq2418
Merci
I am waiting the final sound of the tick✔️.
🤗👋❤️
Автор видео наверное видел как это делать у таких же выпускников ег.
Customers states "keep it organic"
Plumber "no problem fam, ill use hemp fibers and tomato sauce.
😂
Man this guys mind is gonna be blown away when he learns about Plumber's Tape.
teflon tape or T-tape
Your mind will be in fire when youll get some experience in plumbing. In many systems they never use tape.
Hemp has benefits. When it contacts moisture it expands creating a good seal
They only use fiber like this in Europe
@@FirstLast-xf6xxв СНГ странах тоже))
For those who say about plumbers tape.
I work in a small plumbing store. We have fum tape, thread, and various sealants. But those who do the installation always buy only flax and pasta. Just an observation.
And yes, the author of the video uses a hell of few of flax.
Сколько переставил,обычно лен и унипак.иногда лен и слюной пригладил и все,держит не хуже всяких герметиков
Всё не правильно. Льна мало. Герметик просто ппц. Намотка с начала резьбы делаеться а не с конца 🤬
Ждём "Обязательно запомни этот совет от опытных хирургов. Мало кто знает эту технику."
Why scrap the thread ???
До дюйма использую фумку или нить, после лен, насечки не делаю, и так все отлично держится.
Не признаю вообще эту дрянь,только лен!даже на пластиковой резьбе,главное в меру льна и силу применять.
Dont forget to scratch the threads.
They haven't invented pre-scratched threads yet
Is it necessary to make scratch?
@@MahdiPreece960828love nope
@MahdiPreece960828love on a smooth brass/gun metal fitting the inner valley should be roughened to prevent hemp from slipping out during tightening. Generally steel pipe threads are rough enough to keep the hemp in place. This should be common knowledge to all people working within the industry. Unfortunately less experienced engineers only get involved in new installations & rarely work on existing pipework in plant rooms and boiler houses etc.
Если резьба гладкая то это верное решение.
@@MahdiPreece960828loveonly if you want to replace the part and waste time and money
никогда не мажте герметиками-отвердителями потом будешь выламывать в случае замены самые лучшие герметики типа силиконовых или для авто герметик-прокладка
I just lost brain cells and I don’t have many left after watching all these shorts. I better go to bed
bro YOU'RE DOPAMINE LEVEL BRO!
UA-cam, the home of the King of “It seemed like a good idea a the time.”
When you want your pipes to leak but also be impossible to remove fittings without a Saw this is how you do it.
Если нагреть то тогда можно открутить обратно
Why?
@@mr.minkailovv.9552why ?
Это не правда
That's red grease he's using. Not loctite
If I saw a plumber doing that he wouldn’t be my plumber anymore
Yeah, but if you hired him to do a job, because you didn't know how to do it yourself. How would you know if he was doing it right or wrong?
@@jessevance7083 He must be one of these specialists that know and saw everything and he has no time bothering with simple work like this :D In reality he is just a blithering idiot who would fire a professional doing great job because of stupid delusions.
@@jessevance7083 unfortunately that’s why so many get ripped off by so called trades people and it’s best to get recommendations from people you know.
l8u
@@rickbateman2401 can you tell me what he is doing wrong?
Its easier to just dent the threads with a small hammer.
Hemp much better seals than Teflon
Its really not…
Hemp rope is used all over the world with a thread sealant.
Some say it lasts longer also seals better caus3 the rope expands when moisture hits it
Yes!
So does Teflon tape.
@@ianmichelson768 with hemp you can turn 1/4 or even a bit more back without having a leak, with teflon you can't
@ianmichelson768 Teflon has a life span, every product does.
@@ryderkimball7174 including hemp.
Why does the person do that with the hacksaw blade? I was shown how to put theard tape on a towards similar way. You roll/unroll theard tape around the theard a similar way
Coconut husk fixes everything 😂
Но это лён.😳Возможно конопля.Их волокна прочные на разрыв.
Hemp is still widely used in most of Europe, it works really well.
Yes it's true. Thank you!
Probably without the saw cutting the rings. But yes I can confirm.
@@ValaHoughas a plumber, i use the saw too, so the hemp wont slide and stay still
In Iran we use used towel head.
@@holdurhorse9149here in India too
Don't have to hacksaw the made in China fittings, they are cut so cheaply, the threads gall up and seize before you can bottom out the connection.
Yeah I know. I guess we've fallen way behind in plumbing and threading technology! Can't do it ourselves anymore.
That's no joke!
Why not just use PTFE thread tape.
This is very old. Exist better and new ones if needed.
Used on the titan
And the Titanic!
Plumbers tape existing: am I a joke to you
Is this known as wiping the joint?
И после этого,в случае дальнейшей замены, открутить его уже без резака, будет невозможно!
Nearly right
A brass thread is supposed to be scratched in the valley of the thread, roughing the surface of the thread does little to stop the hemp from slipping while the joint is tightened.
.......pipefitter 40 years in.
red loctite, though???
@aronmedow1220 great for small bore
Is the hemp organic !? 🌴