I was up to apply for a house tiles factory, and all they needed was a "seamless" experience with photoshop patterns. Then sir, a notification of this video popped up. You are a life saver. 💪🏽💪🏽💪🏽
I've done this for decades in animation. My work flow is to create a copy, blur it so there's geenral lighting, auto level it then inver it and add is back as a luminosity layer at 12% opacity which is usually spot on. You can do the same with a copy of this layer set to colour to remove colour casts, then ramp up the saturation of the flattened image. Often I've had to deal with a lot of images as textures in projects so its a broad brush to get the work done.
If you're using The GIMP, you can do the same by going to layer > transform > offset. It even has a handy tool in it to offset your image by 50% of it's resolution, placing the seam directly in the middle of the canvas! Then you just use the Clone Tool to remove the seam, then redo the offset to reposition the image. GIMP doesn't have fancy removal / content fill tools though, so it's up to you to clone out the seam.
Damn. You get ahead of me every time! Just left another comment in your latest video about this very thing crying because I couldn’t figure it out. And here you are predicting the future like always. 😂
The King of Photoshop 🦁🦁👑👑 mr unmesh i owe you a full semester tuition fees, because you taught me more than my university lecturer did. A Million Times THANKS From Somalia (east of africa) ❤❤🙏🏻🙏🏻
I have developed around 8000 endless 4k textures for "Virtual Reality brushes" over the last few years: The tiling/endless texture function in the "free, local Stable Diffusion AI" is so good and fast that it's pure magic for me. In PS it sometimes takes hours until a very complex texture is ready, in "SD" it takes around 5 minutes and you can start from your own image...I hope it is okay to post this "non PS tip" here but I think it could be very helpful! Happy colored greetinx.
@@-Castiel- the model is based on the content...you may need more steps for tiling: I render tiling textures with minimum 80 steps...I hope this helps!
@@coloryvr Tried again with 80 steps and no improvement. Maybe it's the content? I was trying to generate something with rainbows, fairies and unicorns; the characters look awful (more like modern art, all melted and confusing) and the colors are very fried sadly. Works fine when I generate with the same prompt but turn tiling off =(
I think there's a strong case to do frequency separation and filter out a subtle gradient that occurs over the whole texture from corner to corner as it comes originally before editing BEFORE offsetting it at first, then you'll have less trouble overpainting the seam by hand if you want to, because the hue and value will match already better.
useful as always, only another tips instead of dodge and burn, use High Pass and blend with down colour levels, to keep details on and make uniform texture.
One way to semi-automate the large scale variation is to make a copy of the layer, invert it, desaturate it, blur it a lot (say, 250 pixels), and normalize the result with auto levels. The result is the negative of the large scale variation in the image. You then apply this in overlay mode on top of the original (using same offset on both layers to bring the seams to the center), and adjusting the layer opacity until the seams are more or less gone. After doing this, proceed to work on the seams with generative fill etc.
Another way of doing the darkness adjustment is to make the image B&W, blur it a bunch, invert it, and multiply it back in. It's the sort of thing you can do in a batch job if you have a bunch to do.
Coming up in the next video: Free plugin to permanently delete adobe products from your hard drive. But seriously you do an awesome job teaching graphic software. Thanks!
Ps2 used to use textures like that. Pattern variation matters in realism and it throws off the image if everything looks perfect or has a repetitive cut and paste blocking.
I was looking at buying the composite plugin and I wanted to make sure “perpetual” means one time purchase and I am good to keep using it forever. (Usually this is called lifetime not perpetual)
This guy is not into BS politics or issue, He simply thinks Adobe product as tools for creators and gives us the best of teachings for free with sincerity and honesty. Try to appreciate it or just shush it up. If you have problem with adobe, you don't need to use it, don't tell others what to do!
Left Adobe yesterday and joined affinity. Should have done years ago. Dealing with the shady and hidden cancellation charges of Adobe subscription right now. I'll never use Adobe ever again
@@valadimostok Adobe's new terms of service gives them the right to steal your artwork and sell it if they want (among other things). They're also being sued by the US government for their scummy business practices.
I understand this will work in photoshop, but if you were to save as jpeg and import into another program where it normally “tiles” will it be seamless then?
Hi, mr Unmesh, could you help me to solve one strange problem with photoshop? It related to graphic tablet, I suppose. When tablet is off, and I work with mouse, Ps slows down. As soon as I turn on the tablet, it starts work fine immediately. How to fix this? Thank you. p.s. sorry for my terrible grammar, english is not my native.
Damn, I’ve been working on nearly this exact same video for two weeks. But there are some issues I’m running into. I wrote a series of actions that would spread out the image all around and work on the seams for me I’m making a seamless pattern to bring into sampler to make a PBR material more specifically to make a height map. When I use generative fill, the feathering that it introduces is 99% of the time visible in the height map as a gray line. Sometimes it works perfectly. Most of times it doesn’t and I can’t figure it out. Have you tried this and run into any problems?
Pls I have an issue. When I work on a design, save and export, the colour looks very different when sent to my phone. I don't know how to fix it. Please help. Thanks
Sir plz make videos (just remember some people like me use CAPTAIN JACK SPARROW version).... So we haven't generative fill 😢.... So plzz sir kindly you make new videos and give us some another tips to learn more with captain jack sparrow 🫡.... Tnks for ur videos to learn us ❤
@@TheWonderOfLifeHave you not been watching the news? Adobe is killing their business with a new EULA that Grant's them ownership of anything you do in their products. Further, they are being sued for unfair business practices by the DOJ because of their hidden termination fees. People are canceling in droves. I don't know if Adobe's trust will ever recover at this point.
Amazing, but still, I wish to learn WITHOUT the genAI, oldschool stuff, any extra tricks? I know about offset and clone tool, but anything more would be perfect!
i remember times we actually had to STAMP the hell out of it to make the edges dissappear. once the generative fill has hi-res option, this problem dies completely :)
We are 3d visualisers and these type of tutorials are so needed in our work!
I've been doing this for 30 years in animation and there are faster ways
@@PrinceWesterburg like ....?
my hero doesnt wear a cape, he makes perfect comprehensive photoshop tutorials
A seamless tutorial on how to create a seamless pattern. Life doesn't get any better than this!
‼️I have never watched a Piximperfect video without feeling like it’s my first day learning photoshop 😂 always something new and on-point
I was totally unaware of the pattern preview view! Game changer. I've been learning new things from this channel for years, so thank you!
My friend, I cannot thank you enough for your kindness and generosity in making these masterpieces of videos, THANK YOU!
This Channel is GOLD ❤
I was up to apply for a house tiles factory, and all they needed was a "seamless" experience with photoshop patterns. Then sir, a notification of this video popped up.
You are a life saver. 💪🏽💪🏽💪🏽
Thank you for putting so much time and effort into helping people know things
Every video you make is like magic! This video has everything we need to make seamless patterns in Photoshop!
I've done this for decades in animation. My work flow is to create a copy, blur it so there's geenral lighting, auto level it then inver it and add is back as a luminosity layer at 12% opacity which is usually spot on. You can do the same with a copy of this layer set to colour to remove colour casts, then ramp up the saturation of the flattened image. Often I've had to deal with a lot of images as textures in projects so its a broad brush to get the work done.
What do you think of adobe's new terms and conditions concerning the content you create on Photoshop?
Such an elegant and easy to understand video! Thank you so much!
If you're using The GIMP, you can do the same by going to layer > transform > offset. It even has a handy tool in it to offset your image by 50% of it's resolution, placing the seam directly in the middle of the canvas! Then you just use the Clone Tool to remove the seam, then redo the offset to reposition the image. GIMP doesn't have fancy removal / content fill tools though, so it's up to you to clone out the seam.
Damn. You get ahead of me every time! Just left another comment in your latest video about this very thing crying because I couldn’t figure it out. And here you are predicting the future like always. 😂
Your videos are always so enlightening.
This tutorial helps to create and complete of my two projects. Thank you so much brother ❤ Keep teaching us. Thank you again ❤❤
The King of Photoshop 🦁🦁👑👑
mr unmesh i owe you a full semester tuition fees, because you taught me more than my university lecturer did.
A Million Times THANKS From Somalia (east of africa) ❤❤🙏🏻🙏🏻
I have developed around 8000 endless 4k textures for "Virtual Reality brushes" over the last few years: The tiling/endless texture function in the "free, local Stable Diffusion AI" is so good and fast that it's pure magic for me. In PS it sometimes takes hours until a very complex texture is ready, in "SD" it takes around 5 minutes and you can start from your own image...I hope it is okay to post this "non PS tip" here but I think it could be very helpful! Happy colored greetinx.
Are u running your own local SD?
yes
What model do you use and what size you generate? I was never able to use the Tiling option with success =(
@@-Castiel- the model is based on the content...you may need more steps for tiling: I render tiling textures with minimum 80 steps...I hope this helps!
@@coloryvr Tried again with 80 steps and no improvement. Maybe it's the content? I was trying to generate something with rainbows, fairies and unicorns; the characters look awful (more like modern art, all melted and confusing) and the colors are very fried sadly. Works fine when I generate with the same prompt but turn tiling off =(
Dude, your tutorials are top notch!
your tutorials are just excellent - thank you
I think there's a strong case to do frequency separation and filter out a subtle gradient that occurs over the whole texture from corner to corner as it comes originally before editing BEFORE offsetting it at first, then you'll have less trouble overpainting the seam by hand if you want to, because the hue and value will match already better.
I WAS WAITING FOR THIS ALL MY LIFE
useful as always, only another tips instead of dodge and burn, use High Pass and blend with down colour levels, to keep details on and make uniform texture.
exactly when i needed it
Thank you so much Unmesh! Helpful and informative tutorial! Good luck!
Amazing tutorial! Thanks for taking the time
hero doesn't always wear a cape, sometimes he always start his session with "let's get started"
Wow, thank you Unmesh!!
Most likable dude on UA-cam. How can you not love this dude? I feel like I’m getting an encouraging hug as I’m learning Photoshop tips 😂
Thank You So Much ❤
Great video, thank you!
great tips, thank you
You are most wise friend. Thank you!
bro knows what I'm looking for
Fantastic - I have no other words... Thank you
Now you are my English teacher also, I'd never knew the word *seam* . I only knew seamless as a full word.
Would love to see you adapt your plugin for Affinity.
This guy invented Photoshop. What a legend!
This really helpful for me since i need this for 3d textures
Superb tutorial. Thank you!
Awesome Sir 🤯
One way to semi-automate the large scale variation is to make a copy of the layer, invert it, desaturate it, blur it a lot (say, 250 pixels), and normalize the result with auto levels. The result is the negative of the large scale variation in the image. You then apply this in overlay mode on top of the original (using same offset on both layers to bring the seams to the center), and adjusting the layer opacity until the seams are more or less gone.
After doing this, proceed to work on the seams with generative fill etc.
Going to try this in Affinity Photo, now that I've stopped using all Adobe products 😀
Is it good alternative?
Excelent tut!
Very very useful.. thanks bro for sharing
Simple yet impactful 🫶
Very Nice video❤❤
idk if you know that but this is helping thousands of 3D artist, myself included
hah! It had been a while since I watched a video of yours. the best OF THE BEST PIXimperfect. thank you.
Another way of doing the darkness adjustment is to make the image B&W, blur it a bunch, invert it, and multiply it back in. It's the sort of thing you can do in a batch job if you have a bunch to do.
Do you have any idea how useful this is for the Arch/viz 3D modeling community?
Thank you!
Excellent.
great video!
Mind blowing tutorial Umesh
Love it Bro
Coming up in the next video: Free plugin to permanently delete adobe products from your hard drive.
But seriously you do an awesome job teaching graphic software. Thanks!
You are a genius, thank you!
goddam what a great tutorial keep it up!
Next level master mind
Спасибо от всей души! 🇺🇿
Nice tutorial
Ps2 used to use textures like that. Pattern variation matters in realism and it throws off the image if everything looks perfect or has a repetitive cut and paste blocking.
I was looking at buying the composite plugin and I wanted to make sure “perpetual” means one time purchase and I am good to keep using it forever. (Usually this is called lifetime not perpetual)
will the compositing plugin detect jacksparrow PS and report..?
Still comfortable with Adobe?
This guy is not into BS politics or issue, He simply thinks Adobe product as tools for creators and gives us the best of teachings for free with sincerity and honesty. Try to appreciate it or just shush it up. If you have problem with adobe, you don't need to use it, don't tell others what to do!
What happened
Left Adobe yesterday and joined affinity. Should have done years ago. Dealing with the shady and hidden cancellation charges of Adobe subscription right now. I'll never use Adobe ever again
@@valadimostok Adobe's new terms of service gives them the right to steal your artwork and sell it if they want (among other things). They're also being sued by the US government for their scummy business practices.
How can we rise our voice to Adobe that They must take back their bullshit Term & condition ? 🤡
I understand this will work in photoshop, but if you were to save as jpeg and import into another program where it normally “tiles” will it be seamless then?
Hi, mr Unmesh, could you help me to solve one strange problem with photoshop? It related to graphic tablet, I suppose. When tablet is off, and I work with mouse, Ps slows down. As soon as I turn on the tablet, it starts work fine immediately. How to fix this? Thank you.
p.s. sorry for my terrible grammar, english is not my native.
You should mention in what version of photoshop is that?
2:46 what we do with Adobe
Thanks, brother
any piximperfect photoshop plugin promo code available???
Hi
Could you please make a video about professional graphic CV on photoshop...?
Please help 😢
Can u make video on how to add cup or hat to a person please
I made textures for Half-Life 1 mod like this around decade ago :P
I'm doing the same for Hitman2 SA (RTX Remix Mod) 😁
I am trying to concentrate on the video but keep getting distracted by this handsome guy looking at the camera with those lovely eyes... 😍
Damn man you’re the John Wick of photoshop.
Damn, I’ve been working on nearly this exact same video for two weeks. But there are some issues I’m running into.
I wrote a series of actions that would spread out the image all around and work on the seams for me
I’m making a seamless pattern to bring into sampler to make a PBR material more specifically to make a height map. When I use generative fill, the feathering that it introduces is 99% of the time visible in the height map as a gray line.
Sometimes it works perfectly. Most of times it doesn’t and I can’t figure it out.
Have you tried this and run into any problems?
amazing
Pls I have an issue. When I work on a design, save and export, the colour looks very different when sent to my phone. I don't know how to fix it. Please help. Thanks
8:33 Why don't call "stone bricks wall"?
really there must be someway to automate this and make it with one click , seems very simple but requires time
Best computer for high level editing ?
I'm waiting for the day when piximperfect shifts to Affinity photos
Wow, that's a lot of work but if you really need a specific texture to be seamless, now you know how
Cool. Now in Affinity Photo please ;]
jordar😍
포토샵의 기능을 배우려 영상을 눌렀지만 잘생긴 얼굴과 아나운서같은 발음에 눈이 더 가는 영상
Sir plz make videos (just remember some people like me use CAPTAIN JACK SPARROW version).... So we haven't generative fill 😢.... So plzz sir kindly you make new videos and give us some another tips to learn more with captain jack sparrow 🫡.... Tnks for ur videos to learn us ❤
This guy has build a legacy over the years that Adobe is about to destroy 💔
Why would that be?
@@TheWonderOfLifeHave you not been watching the news? Adobe is killing their business with a new EULA that Grant's them ownership of anything you do in their products. Further, they are being sued for unfair business practices by the DOJ because of their hidden termination fees. People are canceling in droves. I don't know if Adobe's trust will ever recover at this point.
but/ i don't have pattern preview function
((
We want oil painting classes
Easy fix , Download Seamless images, thanks
or easier
offset to center
remove tool on hard eges
remove tool on dark area
you are done
im able to do this in ibis paint
Amazing, but still, I wish to learn WITHOUT the genAI, oldschool stuff, any extra tricks? I know about offset and clone tool, but anything more would be perfect!
plugin is not working
I want to download free version of adobe master cc2024 with crack version and with ai generative fill
Perfect for Minecraft texture 😅
i remember times we actually had to STAMP the hell out of it to make the edges dissappear. once the generative fill has hi-res option, this problem dies completely :)