Hey Andrew, just wanted to thank you for this video as I have been just searching the web for a rig setup, and none compared to this one. Very informational and to the point, felt like a much shorter video than what the actual length is. I recently sold my A6400 and I will use that money to build this similar rig! This made me more confident in spending the money on these components and putting them to work! You've earned a subscriber, and I will be studying your videos heavy for the insight and tips you give! Take care and killer vid!
Just got a A7IV and this is a great idea that I will copy. Thanks for the video.I have everything except the battery and was thinking about getting a v mount battery but you convinced me to change my mind.
No problem! Yeah the Titon Base is a great option for these bodies, but you could certainly get by even with Sony's NP-FZ100 batteries and some separate NP-Fs for the monitor/recorder.
Pretty much the same setup I use with the A1 and A7R5, only I put the handle on the left side. That way I can support the camera with the left side handle and the camera's built-in grip. Also, I have been using the Ninja V with the A7R5 for the past three weeks. Last month's firmware update must have added support for the A7RV.
Interesting, so you're referring to the firmware update for the Ninja to support (officially) the FX30? Everything worked for me except ProRes RAW recording.
@photoboyjet Hey. Just recently we also got a Sony A7RV with Atomos Ninja V+. The problem occurred during the connection. The signal input does not work when RAW. Do you have RAW output set in your Sony camera ? Could you give us some advice on how to make it work ?
@@adamjopek6434 Is your firmware up-to-date on the Ninja V+? I experienced the same testing it out with my Ninja V; I suspect they haven't updated their firmware yet to support it. I haven't gotten a chance to reach out/ask them yet though.
very nice tuto ! - i don't understand what the new locking slider is, for a74 and a7r5. whatever i suppose you advise to buy new 3667B version ? - 90% of the time i make photo but i'd like to learn video. in that sense, i was looking for arca plate, L-plate... how do we attach a arca plate to a smallrig 3667b ? same way that you attached te battery plate ? - isn't it too tedious to remove cage when you make photo ?
Thanks Marc! I think in most cases folks will end up with the 3667B at this point - seems a lot easier to find now vs. the 3667. The bottom of the cage basically is an Arca Swiss plate itself, but yes, you could use one of the 1/2 20" or 3/8 16" threads on the bottom to mount another plate, like the battery in my example.
This one has a catch in it, so you can still use the battery door easily. But I'd look at SmallRig's half cages if you want something that completely leaves it open: ua-cam.com/video/QmthKjnkncQ/v-deo.html
Nice rig Andrew. A couple of questions… I want to make a build like this, however for audio already own the Sony ECM-B1M Shotgun Mic that needs the camera’s hot show mount. Do you have an idea how I can do a similar build factoring this in? Would I have to sacrifice a top handle? Would that also mean I can’t mount a Ninja V? Also, roughly how long can you shoot with this setup powering both the camera and Ninja V? Thanks.
Thanks Simon! As you said, to accommodate the ECM-B1M, you'd probably want to forgo a top handle and mount accessories like the Ninja V, etc. on side handles that have shoe mounts. Sony does make a MI shoe extension cable that would allow you to mount the mic elsewhere (model: 1-002-838-11), but these are pricey/hard to find. I've found using the power setup in the video, that the Titon Base can power my camera and the Ninja for around 3 hours or so. Powering just the camera alone, that duration easily doubles or triples (e.g. 6-9 hours).
I purchased a Ninja 5 for my a7r5 recently and have been struggling to figure out how to take advantage of the 16bit color (etc.) that would be enabled by pairing an external recorder with the a7r5. I would be so grateful if you could help me.
I think technically the max you'll be able to utilize is 12-bit RAW from the Atomos. In theory the Sony allows up to 16-bit, but not technically achievable in practical application.
Gotcha, Thanks! Did you ever end up making a video on this subject? It's near impossible to find information about using external recorders to improve the a7r5 anywhere on the internet. After getting the firmware updated I was able to get the raw output turned on in camera but I have no idea if its recording 12 bit or not. Apologies, very new to external recorders @@andrewsaraceni
That'd be great haha. I was really surprised by just how little information there is to be found on using external monitors with the a7r5 @@andrewsaraceni
Is the possible to rotate a7iv fip screen completely if cage is on camera? Like for self recording (of course if there is just cage, without cables and stuff)
I might have a stupid question, but still … I’m shooting vids on the gimbal right now and wanna try something like that. What about image quality? Is the video gonna be shakie?
Not a stupid question at all. More weight actually helps reduce shake. That, plus IBIS and some good technique makes for clean handheld shooting. I have a video on handheld shooting too that talks about this: ua-cam.com/video/MIG-N8mBqIA/v-deo.html
Can this rig fits A7R IV (not A7 IV)?? I really need to figure out this! Can you confirm that it really fits as you mention at 0:51? Because smallrig does not state that in their page
Don't have one, but live streaming via USB, HDMI, etc. is pretty straightforward with the newer Sony cameras. My a7R V settings video talks about it a bit.
Check out my video on the Manfrotto 290 Xtra 128RC - it should handle most mirrorless rigs (with an external battery) well: ua-cam.com/video/w7bnPoLROmM/v-deo.html
Check out my video on the Manfrotto 290 Xtra/128 RC - it's a great affordable option for Sony mirrorless cameras: ua-cam.com/video/w7bnPoLROmM/v-deo.html
It has 1/4 20 threads along the bottom of the battery, so you could pre-attach different quick-release plates that work with your tripods, monopod, etc.
Hey Andrew, just wanted to thank you for this video as I have been just searching the web for a rig setup, and none compared to this one. Very informational and to the point, felt like a much shorter video than what the actual length is. I recently sold my A6400 and I will use that money to build this similar rig! This made me more confident in spending the money on these components and putting them to work! You've earned a subscriber, and I will be studying your videos heavy for the insight and tips you give! Take care and killer vid!
No problem, I appreciate that! Glad to hear this was helpful, and good luck with the rig build.
Just got a A7IV and this is a great idea that I will copy. Thanks for the video.I have everything except the battery and was thinking about getting a v mount battery but you convinced me to change my mind.
No problem! Yeah the Titon Base is a great option for these bodies, but you could certainly get by even with Sony's NP-FZ100 batteries and some separate NP-Fs for the monitor/recorder.
Great video, keep up the great content!
Thanks Michael, plenty more videos on the way!
Pretty much the same setup I use with the A1 and A7R5, only I put the handle on the left side. That way I can support the camera with the left side handle and the camera's built-in grip. Also, I have been using the Ninja V with the A7R5 for the past three weeks. Last month's firmware update must have added support for the A7RV.
Interesting, so you're referring to the firmware update for the Ninja to support (officially) the FX30? Everything worked for me except ProRes RAW recording.
I got some questions for you bro running the same cameras and I’ve been looking for someone with it to ask some stuff!
@photoboyjet Hey. Just recently we also got a Sony A7RV with Atomos Ninja V+. The problem occurred during the connection. The signal input does not work when RAW. Do you have RAW output set in your Sony camera ? Could you give us some advice on how to make it work ?
@@adamjopek6434 Is your firmware up-to-date on the Ninja V+? I experienced the same testing it out with my Ninja V; I suspect they haven't updated their firmware yet to support it. I haven't gotten a chance to reach out/ask them yet though.
Great Video! Explained everything I wanted to know with that cage.
Thanks, glad to hear it helped!
Thanks for the video. Very well done, and lots of helpful information!
No problem, glad it was helpful to you!
Good build. Happy New Year.
Thanks, Happy New Year to you too!
Very good build and I’m looking forward to a lot of good things from you!!!
Thanks, much more to come!
This was fantastic, thank you!
No problem, Paul!
Nicely done 👏👏👏 thanks for sharing!!
Thanks Sachin, and no problem!
Cool video bro!! Thanks 🙏
No problem, Obed!
Thanks for the video! I'm getting the Smallrig cage for my A7C and wondered what you'd recommend to mount an H6N to it?
No problem! There's a Boya shock mount I really like using when I mount my H6 to my Sony cameras: amzn.to/3JTWOzS
Love this channel! 💯🍻
Thanks Francis, I appreciate that!
good stuff
Thanks!
very nice tuto !
- i don't understand what the new locking slider is, for a74 and a7r5. whatever i suppose you advise to buy new 3667B version ?
- 90% of the time i make photo but i'd like to learn video. in that sense, i was looking for arca plate, L-plate... how do we attach a arca plate to a smallrig 3667b ? same way that you attached te battery plate ?
- isn't it too tedious to remove cage when you make photo ?
Thanks Marc! I think in most cases folks will end up with the 3667B at this point - seems a lot easier to find now vs. the 3667. The bottom of the cage basically is an Arca Swiss plate itself, but yes, you could use one of the 1/2 20" or 3/8 16" threads on the bottom to mount another plate, like the battery in my example.
Would you please recommend me a cage for my Sony A7iv without obstructing the battery door please
This one has a catch in it, so you can still use the battery door easily. But I'd look at SmallRig's half cages if you want something that completely leaves it open: ua-cam.com/video/QmthKjnkncQ/v-deo.html
@@andrewsaraceni subscribed
Do I have to remove 50 1.2 GM when mounting the 3667 cage?
You might be able to install the cage with it on, but I usually take the lens off prior.
how to use anton bauer battery to trippod
There are 1/4 20" threads along the bottom that'll mount to any tripod head and plate system.
Nice rig Andrew. A couple of questions…
I want to make a build like this, however for audio already own the Sony ECM-B1M Shotgun Mic that needs the camera’s hot show mount. Do you have an idea how I can do a similar build factoring this in? Would I have to sacrifice a top handle? Would that also mean I can’t mount a Ninja V?
Also, roughly how long can you shoot with this setup powering both the camera and Ninja V?
Thanks.
Thanks Simon! As you said, to accommodate the ECM-B1M, you'd probably want to forgo a top handle and mount accessories like the Ninja V, etc. on side handles that have shoe mounts. Sony does make a MI shoe extension cable that would allow you to mount the mic elsewhere (model: 1-002-838-11), but these are pricey/hard to find.
I've found using the power setup in the video, that the Titon Base can power my camera and the Ninja for around 3 hours or so. Powering just the camera alone, that duration easily doubles or triples (e.g. 6-9 hours).
I purchased a Ninja 5 for my a7r5 recently and have been struggling to figure out how to take advantage of the 16bit color (etc.) that would be enabled by pairing an external recorder with the a7r5. I would be so grateful if you could help me.
I think technically the max you'll be able to utilize is 12-bit RAW from the Atomos. In theory the Sony allows up to 16-bit, but not technically achievable in practical application.
Gotcha, Thanks! Did you ever end up making a video on this subject? It's near impossible to find information about using external recorders to improve the a7r5 anywhere on the internet. After getting the firmware updated I was able to get the raw output turned on in camera but I have no idea if its recording 12 bit or not. Apologies, very new to external recorders
@@andrewsaraceni
@@coltonberry9935 That's a good question, it's on my list to tackle. Might be something coming up on that soon in the next month or two. 🙂
That'd be great haha. I was really surprised by just how little information there is to be found on using external monitors with the a7r5 @@andrewsaraceni
Is the possible to rotate a7iv fip screen completely if cage is on camera? Like for self recording (of course if there is just cage, without cables and stuff)
Yes, it's fully accessible and completely unobstructed.
I need this all brother
They're great accessories, for sure.
@@andrewsaraceni HOW TO BAY WHERE IS THE WEBSITE ONLINE TO BA CAN YOU GIVE LINK FOR ME
I NEED TO BUY ALL EQUIMANT
@@DNICTimor-LesteTV Links to everything I talk about are in the video description.
I might have a stupid question, but still … I’m shooting vids on the gimbal right now and wanna try something like that. What about image quality? Is the video gonna be shakie?
Not a stupid question at all. More weight actually helps reduce shake. That, plus IBIS and some good technique makes for clean handheld shooting. I have a video on handheld shooting too that talks about this: ua-cam.com/video/MIG-N8mBqIA/v-deo.html
@@andrewsaraceni thank you for your reply
Can this rig fits A7R IV (not A7 IV)?? I really need to figure out this! Can you confirm that it really fits as you mention at 0:51? Because smallrig does not state that in their page
Yes, the cage (3667/B) also works with the a7R IV.
How To Use Yolobox camera a7V for livestreaming
Don't have one, but live streaming via USB, HDMI, etc. is pretty straightforward with the newer Sony cameras. My a7R V settings video talks about it a bit.
@@andrewsaraceni Obrigado barak maun thanks for information my brother
Brother i Need Tripod for Anton Bauer Battery
Check out my video on the Manfrotto 290 Xtra 128RC - it should handle most mirrorless rigs (with an external battery) well: ua-cam.com/video/w7bnPoLROmM/v-deo.html
brother i need tripod for sony a7v
Check out my video on the Manfrotto 290 Xtra/128 RC - it's a great affordable option for Sony mirrorless cameras: ua-cam.com/video/w7bnPoLROmM/v-deo.html
The battery is nice but when I go handheld I need my camera tripod ready and that deletes that opportunity.
It has 1/4 20 threads along the bottom of the battery, so you could pre-attach different quick-release plates that work with your tripods, monopod, etc.
Ahh ok thanks