Bending Plate Animation - Autodesk Inventor 2020 Tutorial

This tutorial will show how to create a bending process of a plate in animation, hope this video will give you clear explanation.
please leave comment below
=================================================================================
Help me to spread the knowledge by donating to my paypal account:
paypal.me/DidiWidyaUtama
=================================================================================

[@michaelwardas3355]

Great tutorial! I haven't seen movement driven through a parameter in a presentation before.

[@DidiWidyaUtama]

Thanks, this also worked with pipe bending too

[@donpanton9250]

Such a Great Tutorial. Thank you very much.

[@DidiWidyaUtama]

You're very welcome!

[@benogega2543]

I love your tutorials, you make it fun and simple.

[@DidiWidyaUtama]

ben ogega thanks😄👍

[@cad_krenovaku]

Terima kasih Pak untuk simulasi bending Dienya menggunakan AutoDesk Inventor. Salam sukses.

[@DidiWidyaUtama]

sama-sama

[@solidedgebr7912]

Excelent Explanation !👏

[@DidiWidyaUtama]

Thanks! 😃

[@TheVinnare]

Great tutorial, thanks

[@DidiWidyaUtama]

Thanks

[@hoanghuyduong2391]

thank you for your tutorial!

[@DidiWidyaUtama]

You are welcome!

[@lamhoang1187]

Can you make a tutorial how to making a off road front bumper by Inventor. I’m trying to make a front bumper by Inventor 2020. Your tutorial videos is very simple and interesting. Thanks for the videos.

[@junsan8063]

Hadir ya bosku.mksh

[@DidiWidyaUtama]

Makasih juga

[@user-pl5ut2jb1i]

Great Tutorial, thank you very much. I have a question. could you make a video of simulation about paper case closer. i meen packeging

[@saeedkazemi6161]

Very good

[@DidiWidyaUtama]

Thanks

[@joelamoos5684]

Hello Didi, thank you that was great. Is there a way I could 3D more parts of a press brake and create full bend cycle simulations? I know it is a lot mlre complex but if I set it up correctly it would be a great help for the production process

[@delbarba]

You can add the punch return leaving the bent sheet metal to the animation? Thanks

[@DidiWidyaUtama]

yes, it is possible, just add more animation constraint on the punch and set it to move away from the bent sheet

[@robertospilerekestering7145]

Fantastic tutorial, congrats. I've noticed you sometimes move the 3D model without moving the mouse cursor, how do you do that? Is there a way to move the 3d model through the keyboard? Thanks!

[@DidiWidyaUtama]

I used 3Dconnexion space mouse on mu left hand

[@Mawyman2316]

@@DidiWidyaUtamayeah that’s standard. I need to use mine more

[@avhe2719]

bang bikin animasi untuk buka tutup kemasan pouch dong

[@irsalmuhammad6169]

hallo kak, maaf mau nanya pak , itu asmmbly akhir nya bisa sambil analisis material nya ga ya ?, soal nya saya ada kendala, saya bikin analisis uji bending balok komposit dengan 3 oint bending , nah kendala nya tuh spesimen terhadap tumpuan constrain nya fix, sedangkan di aturan harus roll seperti yang kakak kerjakan, apakah ada solusi

[@Bg_Anipar]

Have you tutorial metal sheet 3d using autocad?

[@DidiWidyaUtama]

no, i dont have it, since autocad is focusing on general drawing only.

[@georgeanesoglou8074]

Good one! But how can I add this function to my inventor?

[@DidiWidyaUtama]

Just follow my video

[@tiohonesta8966]

Mohon pencerahannya gan, Saya juga memakai aplikasi autodesk dan saya mau built PC. Nah kalau aplikasi autodesk itu lebih baik kita memilih spec CPU atau GPU yang di tinggikan?
Seebelumnya Terima kasih.

[@DidiWidyaUtama]

Sepengalaman saya CPU membantu saat proses render, simulasi FEA, GPU membantu menampilkan gambar di layar, jika untuk jumlah komponen yang banyak tambahkan RAM juga.

[@tinuktinu4146]

Spek letop yang kayak apa pak untuk invertor

[@DidiWidyaUtama]

Please check in the autodesk website, thanks

[@jot9979]

Why is the picture so blurry?
Can't figure out what's happening on Inventor's screen?
Why such a blurry screenshot?

[@anjitasingh7908]

Good video, but your talking is so slow. Takes long to get to the point

[@DidiWidyaUtama]

thanks for your feedback

[@GuyHarris1969]

What a stupid response. I liked his delivery: makes a difference from inane muzak playing in the background, and an artificial speaking voice.

[@anjitasingh7908]

@@GuyHarris1969 Hence the reason I said "GOOD VIDEO, but...." meaning it's a compliment but I'm giving constructive criticism.
It helped me in what I was doing but there was an unnecessary waste of time. The youtuber can choose to take the advice or leave it. Everyone needs to be able to take criticism in order to improve. Seems like you would want to remain stagnant without any improvements in what you do. Oh well, I guess not all people can take it with a pinch of salt. I use videos because it's better than trying to do this from written instructions, it's no point in using videos if they going to take the same amount of time as if I was reading how to do this. I had to actually skip parts of it to get to the point. But maybe some people are slower learners....
I stupid response is 1 that's not being helpful to anybody in any way or causing drama for no apparent reason, a.k.a the comment above.
Ciao 👌

[@TheCuriousOrbs]

You know that you can change playback speed of all UA-cam videos, right?

[@agilb376]

Bang punya saya hasilnya ko kebalik

[@DidiWidyaUtama]

Kebalik apanya?

[@sankettaware3511]

i got 10 ads in single video

[@Noerg66]

Great Tutorial. Thanks a lot

[@DidiWidyaUtama]

You are welcome!