Refill Samsung ML1610 SCX4521 Toner Cartridge

Поділитися
Вставка
  • Опубліковано 4 гру 2024

КОМЕНТАРІ • 54

  • @sahbibesbes
    @sahbibesbes 8 років тому +2

    gracia frerro you channel is the best among reffilling chanels

  • @CaptMdFaizurRahman
    @CaptMdFaizurRahman 7 років тому +1

    It's a fully professional, great, educational video....many Thanks. Really appreciated.

  • @davidbrown8303
    @davidbrown8303 6 років тому

    If you have a damaged windshield wiper blade can you buy rebuild kits for the cartridge itself.?

    • @viandant5
      @viandant5  6 років тому

      what do you mean? you have to change the wiper blade

  • @RAJANWARA
    @RAJANWARA 5 років тому

    at 7:13 u did not install the white gear back ..is isn't necessary ?

    • @viandant5
      @viandant5  5 років тому

      the gear moves the paddles and the toner inside the toner hopper. It's not necessary but You'll have to shake the cartridge every 2-3 weeks

    • @RAJANWARA
      @RAJANWARA 5 років тому

      @@viandant5 Yesterday o was cleaning my toner cartridge and two white gears fell out i replaced them but now i think toner cartridge is not rolling ..m hearing a humming sound and i think parts inside the toner cartridge is not rolling ..what to do now ? btw thanks for replying :)

    • @viandant5
      @viandant5  5 років тому

      @@RAJANWARA there is a gear in the toner roller. it's an important gear. I think you have to disassemble the cartridge and reassemble it again

    • @RAJANWARA
      @RAJANWARA 5 років тому

      @@viandant5 ok i have reassembled it and now working fine ... i want to ask is it good to buy a new cartrdige (compatible not original ) or should i just get my original toner cartridge parts changed (like drum,etc) because original cartridges are costly

    • @viandant5
      @viandant5  5 років тому

      @@RAJANWARA compatible parts should be te same as original, at least the important ones (drum wiler blade doctor blade)

  • @marswood5859
    @marswood5859 6 років тому

    Does work toner from Samsung ML2010 in Xerox PE220? I think the are the same. But i think Xerox Pe220 have classic chip, do i need it? Thanks, you are the master!

    • @viandant5
      @viandant5  6 років тому

      yes, Samsung ML 2010 will work. yes, it has a chip and you have to change it

  • @MohammadReza-vj5qx
    @MohammadReza-vj5qx Рік тому

    Thank for your clipe my question is:when i refill the catrige and instal it the printer will show the massage no catrige what happend?

  • @MrSyedabuthahir
    @MrSyedabuthahir 5 років тому

    My samsung ml1640 printer not print some times properly. When I give print some times paper pickup from paper tray and it goes up to fuser assembly it hangs over there it glows orange led in printer. Please inform me what is the issue for my printer and how to rectify the problem please guide me.

    • @viandant5
      @viandant5  5 років тому

      check if there are foreign objects in the fusers, check if the fusers are worn, check the paper fingers. may be there is toner on them. try to print on a cardboard, maybe it will remove foreign object who cause the problem

  • @anikratandas4441
    @anikratandas4441 5 років тому

    How can I know about my toner cartaige that it is 12A or 35A or 36A ?

    • @viandant5
      @viandant5  5 років тому +1

      they are different cartridges. For start 35A / 36A have a chip.

  • @anthonycardenas9177
    @anthonycardenas9177 6 років тому +1

    NICE video but REPLACEMENT cartridge are SO reasonable (eBay) ~ why subject yourself to this?
    REMEMBER ~ IF you get toner on your hands or clothes use COLD water to clean ~ *never* HOT WATER as it will FUSE the toner!

  • @harrypinder5748
    @harrypinder5748 8 років тому +1

    Thank you. very good.

  • @MrSyedabuthahir
    @MrSyedabuthahir 5 років тому

    After refill my toner and replace chip also. When we give print after it shows in print status in computer lsu error and green led change into red led is glowing. How to resolve this issue

    • @viandant5
      @viandant5  5 років тому

      check if the pin in the front of the cartridge near the fuse is broken, as shown in the video. this cartridge does not have a chip, it has a fuse

    • @MrSyedabuthahir
      @MrSyedabuthahir 5 років тому

      @@viandant5 there is no fuse in that toner. Please specify how much rating of fuse

    • @MrSyedabuthahir
      @MrSyedabuthahir 5 років тому

      @@viandant5 no broken in front pin

    • @MrSyedabuthahir
      @MrSyedabuthahir 5 років тому

      @@viandant5 initially when I start my printer it shows green led when I give print through system or self print it starts red led glow in system it shows LSU error after restart my printer it glows green light then once I give print red light starts glow

    • @viandant5
      @viandant5  5 років тому

      @@MrSyedabuthahir In the video you'll find the rating of the fuse and the position

  • @alluprasad3298
    @alluprasad3298 7 років тому

    TAN q SIR, MACHINE IS TAKING COPY BUT ANOTHER COPY IS TAKING CONTINUE,WHAT IS THE PROBLEM I CONT UNDERSTAND PL REPLY SIR

    • @viandant5
      @viandant5  7 років тому

      May be the main board, or a defective paper sensor

    • @alluprasad3298
      @alluprasad3298 7 років тому

      tan Q sir

  • @MrSyedabuthahir
    @MrSyedabuthahir 7 років тому

    After refill my printer indicated red colour even it does not print self price also. It coming blank page. Please tell me how to reset printer and make print property

    • @viandant5
      @viandant5  7 років тому

      what do you mean? it does not prin nothing? did you change the fuse?

    • @MrSyedabuthahir
      @MrSyedabuthahir 7 років тому

      viandant5 no fuse in my catrage

    • @MrSyedabuthahir
      @MrSyedabuthahir 7 років тому

      viandant5 even self test page also not printing, if I give print in my printer it comes blank page

    • @viandant5
      @viandant5  7 років тому

      there is no fuse because probably it's a starter cartridge. insert the fuse

    • @MrSyedabuthahir
      @MrSyedabuthahir 7 років тому

      viandant5 there is no fuse insert position in indian catrage

  • @ramchaudhary9766
    @ramchaudhary9766 7 років тому

    my printer print blank sir what can i repair broken front pig

    • @viandant5
      @viandant5  7 років тому

      Try a new toner cartridge, if the problem does not solve the problem probably is the main board and you can do nothing

  • @cristianomatos4560
    @cristianomatos4560 9 років тому

    Thanks

  • @ReddyReddy-yn5uf
    @ReddyReddy-yn5uf 5 років тому

    lot thank

  • @shwetagautam4332
    @shwetagautam4332 5 років тому

    you rock,

  • @alluprasad3298
    @alluprasad3298 7 років тому

    HOW TO TEST AND REMOVE CLUTCH SAMSUNG SCX-4521

    • @viandant5
      @viandant5  7 років тому

      Sorry I have no video on how to dismantle Samsung SCX-4521