at 3:32 is the big washer supposed to sit on a lip and not move up and down the shock? I may have gotten a faulty shock and just need to know. My washer slips down the whole thin metal rod.
Thanks O'reilly for this install video! I have a 2008 Honda Civic, non SI; KYB shocks. Nowhere could I find on KYB literature where the sleeve went; their install literature is piss poor! Unfortunately, O'Reilly is only in Connecticut across Sound from me! I will consider ordering on line from you!
Supplies Needed for This Job:
1. Safety Glasses: urlzs.com/hbwc
2. Gloves: bit.ly/2GvfwAm
3. Shock Absorbers: bit.ly/2oiGswC
4. Ratchet and Sockets: bit.ly/2IEAOOi
5. Torque Wrench: bit.ly/2UToD1D
6. Trim Tool: bit.ly/3bPPzZi
7. Jack: bit.ly/2ZxQiJl
8. Jack Stands: bit.ly/2L1YEp9
9. Screwdriver: bit.ly/31Q1CUI
Great video. Thank you. I installed the same shocks and all seems well.
at 3:32 is the big washer supposed to sit on a lip and not move up and down the shock? I may have gotten a faulty shock and just need to know. My washer slips down the whole thin metal rod.
Great video simple and to the point
You jimmied the threads with that vice-grip. You also put the rubber bumper holder upside down on the shock!
He also tightened it to 51 lbf.ft when the spec is 44 lbf.ft, although I might be wrong.
@@andresilvasophismaSi is 51 others are 44
Thanks O'reilly for this install video! I have a 2008 Honda Civic, non SI; KYB shocks. Nowhere could I find on KYB literature where the sleeve went; their install literature is piss poor!
Unfortunately, O'Reilly is only in Connecticut across Sound from me! I will consider ordering on line from you!
So nice explaining, thank U guys 👍👍👍
So I’d like to know how you can tell what 22ft lbs is with a ratchet wrench ?
Angle of turn
Those Monroe shocks are total garbage. Get KYB's.
Ow.