Dynam me262 Maiden, Twin 70mm edf from Bitgo Hobby
Вставка
- Опубліковано 6 жов 2024
- Well we finally get it right on this flight. I explain why it took 3 takes to get it right. Overall my impression of this edf from Dynam and BItgo Hobby is a winner esp at the $250 price point. A few small hiccups but over all we get over 3 minutes of decent aerobatic flight on this 4s plane. It was very grass capable even though the takeoff is a bit longer than it was on pavement. Retract were perfectly fine, a nice touch with the wing lights and spacious Battery area. Nose weight was needed to achieve balance. Throws were set per manual.
Check it out here:
www.bitgohobby...
Paypal Donations always excepted:
paypal.me/bren...
Follow me on:
Facebook Official Page: / officialjustplanecrazy
Facebook Member Page / 2135398913272660
Instagram / _justplanecrazy_
Check out the Merchandise @ teespring.com/...
Always better to add nose weight than risk a stall ! Surprised you needed extra weight with all the wing sweep !
Yeah. Tail heavy is a def no go
Well done my friend, we have this plane on test table in the hanger, have not made maiden flight, I believe we have a bad fan left side. Will have to replace it. Can't fly it like that for sure😎
Good luck. It’s a neat plane. Flew it several times this weekend.
Third time the charm, butter landing. Brilliant flight👍🏻
For sure. Thanks for watching as always.
Hey Brendan, love your 262, I have one also that flys great too, I converted it to 6s, put the escs in back of nacelles for cooling and plan to repaint to Japanese color scheme. A great flyer though.😊😊
Awesomeness. Should fly amazing 6s. Great idea with the esc’s. Thanks for sharing and watching.
I have this plane. I vented it because on even a moderate warm day those esc will smoke if you run it at all hard.
Can’t say I have run into that at all but thanks for the heads up
i use 2 3300mah 4s Parallel wired and get the needed weight up front and end up with 6600mah 4s this is the way to go with the plane since all that weight is needed up front anyway
Great idea
Likely put mine together this week after sitting nearly a year. Local fly-in this coming weekend if weather behaves will be a good time to fly it. Hopefully maiden at my club first.
Good luck and don’t forget to get that cg right. I was surprised by the amount of nose weight need but their numbers are correct.
good looking flight ! ...
Thanks and thanks for watching. I was ratcheted surprised at its ability as a 4s setup
You use a gyro with this plane? You fink he fly good without? Nice fly 👍✈️this color is nice too👌I have the artic color, but never fly with it😔😂
No gyro. It is a good flying plane for the price. Takes a little length to get off grass but it’s a neat plane for sure
Great review.
Thanks. And thanks for watching
Hope availability of Dynam models will resume.
For sure
Also Drill out the Gun Ports for extra cooling thats needed...Many of these planes on Fire on UA-cam
Did that. Thanks didn’t see the fire thing 🔥
59 inch wing
I have the same plane but I didn't put weight in front and I had a plane with a very heavy tail and I crashed it now I can't get EDF that covers the engines, could you tell me how much weight you added on it, thanks and great video
Almost 6-7 oz of nose weight. It’s a good bit. Like I said cut the nose open and put some in there and on each side on the inside of the retract nose opening. The cg by the book is correct it just takes a lot of weight to get there. Plane still flys good with it. Thanks for watching. Don’t forget to subscribe and share
I have one.if these NIB. Just bought the Freewing ME262 70mm 6S power system for their 262 for an upgrade. You mentioned a possible upgrade for yours. Did you ever do it? This would be a good video to do, hint, hint..
As much as I agree I decided to sell this model. I enjoyed it and it was time to pass it on. Thanks for watching and commenting
250.00 how long ago? Bitgo is selling them for 369.99
Wow they have really gone up since buying mine!!! Shipping cost is driving prices to the moon!
Since receiving mine and doing this vid there has been an obvious price increase. This has been notable across every hobby company. It is what it is for sure.
Cool Bro!!! 🤙🤙🤙
Thanks and thanks for watching. Comments are also always appreciated
@@JustPlaneCrazy Of Course! Same to you on my channel bro!! 👍
Subbed and belled my friend just now so I don’t miss out!
@@JustPlaneCrazy 🤙🤙. Sweet Bro!!