How to Replace Radiator 2011-2017 Honda Odyssey
Вставка
- Опубліковано 2 жов 2024
- Buy Now!
New Radiator from 1AAuto.com 1aau.to/ia/1ARA...
This video shows you how to install a new TRQ radiator in your 2011-2017 Honda Odyssey. Overheating is a sure sign there’s something wrong with your cooling system. A leak, rust, or obstructions are all cases that may require a radiator replacement. Install a new TRQ radiator that’s engineered to fit your vehicle.
This process should be similar on the following vehicles:
2011 Honda Odyssey
2012 Honda Odyssey
2013 Honda Odyssey
2014 Honda Odyssey
2015 Honda Odyssey
2016 Honda Odyssey
2017 Honda Odyssey
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oa4A/1A...
• 10mm Wrench 1aau.to/oMb/1AX...
• 10mm Socket 1aau.to/oaNy/1A...
• Coolant Funnel Set 1aau.to/oa6/1AX...
• Trim Tool Set 1aau.to/oV2/1AX...
• Hose Pinch-Off Pliers
• Hose Pliers
• Pliers
• Ratchet 1aau.to/obg4/1A...
• Socket Extensions 1aau.to/oa5V/1A...
• Swivel
• Drill
• Cloth Rags 1aau.to/oxx/1AX...
• Gloves 1aau.to/oBp/1AX...
• Safety Glasses 1aau.to/ovc/1AX...
• Drain Pan 1aau.to/otB/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Dude, should have changed the tranny cooler lines when you were in there. They were rusty and it would have been much easier while everything was apart. Also wouldn’t be floating in the compartment like they are when you were done with the job.
BRO, why didn't you just remove the fans first then you can access all of the tranny cooler lines, drain plug, lower rad hose, and sensor plug,, then BOOM pull it on out... put the new one in button it up, put the fans in button them up, then do the hood latch, battery, trim piece, air intake, fill the radiator up, and boom your done, you dont need to take the bumper off etc... JS
Thank you for the video! the two brackets you cut off on the bottom, are they not needed when installing the new radiator?
just fyi, for anyone doing this. It was easier to pipe clamp and disconnect the transmission line near the driver side tyres. I removed the radiator with the tranny cooler lines attached. That bolts at 16:10 and the cutting at 17:10 can be done after removing the radiator instead of doing it underneath the car. The video was very helpful, thank you
Cut the radiator hose. Should replace it anyway.
Cut the cooler hoses. Should replace them anyway.
Best place to order the parts?
+Kristen Mason Thanks for the feedback! 1aau.to/m/Shop-TRQ