DIVISION VERSION 4.0 HYPE REEL
Вставка
- Опубліковано 29 вер 2024
- Division V4 enters the fleet at the start of 2024, with a debut at NHRL on Jan 20th.
Thank you to PCBWay for machining critical components fast and precisely. Check out PCBWay for all your CNC fabrication, PCB-making, and 3D printing needs! bit.ly/PCBWayJ...
There will be a limited number of units of the RDY-5536 motor available for beta testers pre-launch, reach out at team@justcuzrobotics.com if you are interested. Must be located in the United States, and planning to integrate it into a robot that will compete before February 26th 2024.
CAD model for the hubmotor: grabcad.com/li...
Available for sale now as of 3/25/24 at justcuzrobotic...
Watch the event stream live: www.youtube.co...
Just 'Cuz Robotics Website: justcuzrobotic...
Just 'Cuz Store: justcuzrobotic...
Support on Patreon! bit.ly/JCRPatreon
Try PCBWay's CNC Machining or PCB Fab using this link for a $5 new user credit: bit.ly/PCBWayJ...
Instagram: @JustCuzRobotics
/ justcuzrobotics
Bloodsport UA-cam Channel
/ bnsrobotics
@bloodsport_battlebot
/ bloodsport_battlebot
Bloodsport/BnS Facebook Page:
/ bnsrobotics
#CombatRobotics #beetleweight
![Can My Custom Weapon Motor Survive? [Mass Destruction 2023 Recap]](http://i.ytimg.com/vi/LdkIH0p8NEM/mqdefault.jpg)
It was inevitable that division would end up with a counter-gyro. Can't wait to see what it can do :D
Division is probably my favorite beetleweight due to its rolling and stuff
The two UHMW pieces seem to hold by a piece of carbon fiber and the TPU frame, I don't know if it might bend in the middle leading to the friction system of the weapon to stop working after a hit. You're always nice to see go with your ideas, excited to see the results! Cheers :)
There is another 3d print sandwiched in the middle so they are decently rigid setup but it could cause some issues.
I've only been watching you a few weeks but as soon as I saw the design breakdown, I knew this was Gona rip! Ironically, I've wanted to comment about using counter balance wheel to aid driving
I've probably gotten a few comments over the years recommending this but it is a massive undertaking. The flywheel system adds half a pound to the robot and a lot of additional complexity and precision. It's also by far the most expensive part of the bot - PCBWay made me the parts for free but it would have cost over $150 for a single flywheel assembly out of pocket. I was not as confident in my ability to pull this off until I put weeks of thought into it. And I explored a lot of different ways to spin the flywheel before deciding on the friction/tangential drive system.
@@JustCuzRobotics well done man, I love watching the creativity and problem solving flow, you always lose something to gain something no matter what it is you're doing. Cannot wait to see this thing debut
Oh baby! Mad respect to the ambition to direct-drive your weapon. Cheesecake the antweight robot approves! Great way to save weight, albeit at the expense of potentially damaging the weapon motor, I'm excited to see how it holds up!
The hubmotor system should be very durable. I think it would be especially good for horizontal spinners which tend to lose belts constantly due to long belt lengths and low rigidity.
@@JustCuzRobotics - Darn it, you're right, that's a really good use case. I'm in the early design stages of my beetleweight, so I might just do that instead of a traditional belt system.
What in the name of Uppercut/Monsoon/Repperoni!
Can't wait to see it in action. The clips at 1:56 are really well done.
Thank you! Sadly I cannot take all the credit for that hubmotor render as that was commissioned, but I edited and filmed the rest of the video myself besides those 15 seconds.
Definitely getting some Uppercut vibes from that beast! Kick some bot!
Yeah it was definitely Monsoon inspired, but the pivoting body thing was just totally impractical to do at 3lb so it ended up a bit more uppercut in form.
giving shades of uppercut
Love the concept of a just add a blade drop in wepon system. As a new builder, designing a reliable wepon system has been the biggest challenge so far
That is the hope! My goal with Just Cuz Robotics is to lower the barrier of entry into the sport of robot combat for everyone. I think a purpose built weapon motor is the best way to do that going forward.
@JustCuzRobotics your definitely on the right track. So far, all your videos and products have been really helpful. The only suggestion I would have would be to offer some of your boards pre-soldered since most people starting out don't have fume extractors, and it's not always an option to open a window in the winter
I believe that if you want to build and fix your robot you probably need to learn to solder. A fume extractor while a nice to have isn't an absolute necessity. A few people told me they solder in a bathroom with a vent fan going.
psyched to see how if the flywheel gearing will hold, and how it will drive with the gyroscopic forces of the weapon potentially cancelled out by the flywheel. Also cant wait to see how the direct drive motor will work.
The flywheel cancels about 60% of the weapon Gyro so it's not perfect but it's still extremely helpful. The rubber disk driving the flywheel is sacrificial and probably will get shredded by the end of a fight but it costs next to nothing to replace.
@@JustCuzRobotics I love the fact that the rubber disk covering the flywheel is basically a weapon belt. It's just using compression instead of tension to transfer motion.
That weapon motor is fantastic. Literal custom motors for combat robots. Things are moving.
Super psyched to see how it drives in combat with the counter-gyro flywheel :)
I understand that this is probably a vast improvement and I can’t wait to see what this new Division can do. It’s the bot that competes at NHRL that I am the most invested in. However I don’t like the new look. I loved the old one so much and as much I can’t wait to see what this can do I’m gonna miss the old look.
That is certainly fair. It's a big departure and it sortof feels like completely starting over. But I'll be able to make changes in the future much more easily with this design archetype without it costing an arm and a leg, so I can evolve the appearance a bit down the line.
This isn't terrifying
Not at all 😥
LETS GOOOO NEW JUST CUZ VID!!!!!
Absolute flames- cannot wait to watch all the fights V4 was in that I missed yesterday!🔥🔥🔥
you should try putting that motor on a ant weight
Ha that would be insane. It's almost half the weight! I think maybe a smaller ant specific version would be a good idea tho...
That intro, damn hype!! Look's great, can't wait to see it in action!
Looks beefy
That’s sleek as hell. Plus that new bar has such a nice design to it
Thank you! Hoping it works as good as it looks.
Orange Monsoon XD (will be hard to defeat)
Monsooooooooooon! Awesome variation and original ideas mixed with monsoon esk things. Awesome job
Thank you. Monsoon is one of my favorite bots and I wanted to make homage to it.
i am gonna be very weirded out by the chonky division instead of it being wide
This kinda reminds me of a mini uppercut, can't wait to see some future videos on its progress!!
Looks like an angry chicken. Good luck!
I’m redoing my bot right now(actually it’s pretty similar to your 4.0 division which made me laugh when I saw your design) and I have extra weight to spare since my new chassis is gonna save a bunch of weight and I might borrow that fly wheel idea. That’s so smart to try and I don’t think anyone has yet on a bot this small. The beetles are getting to the point where people can actually try stuff like this and it’s awesome
I'm definitely not the first to do a flywheel at 3lb, but maybe like 3rd or 4th? With the flywheel and no front ends, the bot is still under 3lbs, while Fireball 3lb is 3.5lbs with their flywheel, so it might technically be the first
Lets gooo seth! Fun meeting you yesterday!
I am looking forwards to this version of Division and how it performs.
Cool tech, looks hella goofy though.
I can’t wait to see how it’s drives around the arena!
Seth, that thing will kick ass. But I have mixed feelings about the design because it is not like any division I have ever seen before. Also, with the right luck and skill, you might beat lynx. Also I have an interesting idea. What I’d Division was a drisk?
A drisk would mean the blades are half the thickness, worse for fighting horizontal spinners. But I could probably make a drisk version of the hubmotor... Would be better for bots with a smaller than 6 inch weapon
@@JustCuzRoboticshow thick is the weapon
What’s Remainder?
It's a 0.44lb minibot. The flywheel system is heavy so in some cases I need it for extra weight at NHRL as they have a 1lb multibot bonus.
So there's an outrunner and an inrunner version?
No, not sure what you saw that made you think this. Watch the whole video it's explained in the last 3-4 minutes.
@@JustCuzRobotics for some reason I was thinking Subtraction used an inrunner, but then I remembered that was direct mounted too
Thats fire dude. I was thinking about doing something akin to a mini monsoon myself with invertibility, duplicated sides on a 45 degree angle and programming in a switch the just invert the bot at will, but always had issue trying to figure out what to do with the motor. That hub might just be trick to make it fit!
Yeah hubmotor should be ideal for this for sure
the intro was sick as
🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
This is bot art
Awesome ❤
Uppercut
I enjoy the new division, but would you bring back division 3.0 for a few more matches, perhaps under a new name like Fraction or something? Because I enjoy the chaos Division 3.0 and other tower verts (like deep six) bring. But how much KE did you lose with the smaller disk, and how much smaller (in terms of diameter and weight) is the disk?
The old weapons went up to 255g and 7.5inch diameter. The new weapon is 170g and 6in diameter, but the weapon RPM is substantially faster. V3. Was 211mph and V4 is almost 300mph so it has a similar amount of KE.
As far as bringing V3 back, I honestly thought about selling it so someone else can do that for me. I have a small apartment full of robots and I have 2 almost complete Division V3 copies that could use a new home....
Incredible redesign! Really smart to not rely on your weapon for self-righting and I'm so excited to see the counter-gyro flywheel in action, especially with it intended to store energy! I was away and couldn't catch NHRL this weekend, but I'm pumped to check out some highlights.
The NEW Division looks awesome, stronger, and more robust than the previous version. That new Division will surely win the NHRL 2024 for sure or at least to the Finals. Looking forward to see it.
Le gasp. It looks amazing. Can’t wait. Chris is already shaking in his boots
great design! however, i have a question:
since the flywheel has so much energy stored, when your blade hits something and stops, wont the flywheel keep spinning (thus, the knurled wheel) and shred the TPU disc? how does the setup compare to a spur gear design? thanks
You are exactly correct! And that's intended to happen since the alternative would be transferring all the flywheel energy into the weapon and that's a ton of energy to handle. It would probably shred normal gear teeth. The TPU rubber disks cost $0.32 in plastic to replace so I can do that every fight if needed.
@@JustCuzRoboticsoh, that makes sense.
have you ever thought about adding a really stiff radial (torsion) spring in the disk/gear somehow?
i believe it wouldn't affect spin up time so much and could maybe reduce the amount of energy received by the motor on impact, might also reduce the force of the impact overall tho, idk.
a friend of mine used a one-way bearing on a vertical spinner robot, it pretty much nullified every impact to the motor, but it did reduce the damage caused by the bot, it would be interesting to see somebody testing this.
The current system works well so I'll probably keep it more or less the same
Sad it's not like deep six anymore more like uppercut
What does everyone have against uppercut?
@@JustCuzRobotics it's powerfull but half the bot isn't the weapon anymore😢
Imagine if Ripperoni comes to Season 8 looking like a big version of this
The color scheme makes those weapons really stand out^^ remainder and division got my eye
division is here to Divide the enemies and Conquer the leaderboards!
Awesome! Can't wait to see it in action! Also, I love that the minibot is named "Remainder." 😂
holy cow, this thing looks like a beast. So excited to watch you tomorrow!
3:00 Will the flywheel energy and weapon energy add together? 500J + 1500J = 2000J
Not exactly. The flywheel will slip on hits so it isn't adding energy in the moment of an impact but it will slowly spin the weapon up after a hit
@@JustCuzRobotics wait, aren't they spinning opposite to each other so they can cancel the gyroscopic force of each other?
Yes they cancel gyroscopic momentum, but that's different from the kinetic energy delivered on a hit
Looking forward to the design breakdown! Looks good
An absolute work of art.
Aw thank you!
Oooh, I see some Nice UHMW....
"confuration" 2:22
Ugh... **Configuration**. Why can't video editors have spell check?
I... love this thing. 😍
Ooooh this looks AWESOME!!!
THIS IS AWESOME!!!!
Oh no what did you do this time
R.I.P old division that big weapon will be missed and that bouncing around
We might still see some bouncing around, but you're right, I had to sacrifice the 7.5inch weapons I've used since 2019. Synthesis 3lb has an 8inch weapon so I already lost the big vert crown a while ago. But it's okay, Subtraction still has blades with up to 10ninch effective diameter 😁
@@JustCuzRobotics good to know 😀
THIS IS SICK!!!!!!!!
Can’t wait
I’m hypedddddd
🍿
4.0 is just beautiful Seth! Just beautiful.