Skid plate / Sabot Honda XL750 Transalp - AXP Racing
Вставка
- Опубліковано 9 вер 2024
- VF disponible ci-dessous
Product: www.axp-racing...
Engine guard for Honda XL750 Transalp - Made of 8mm thick high-density polyethylene plastic, the AXP skid plate offers a complete protection to your bike. Highly exposed, the exhaust system is completely protected thanks to HDPE plastic that returns to its original shape after impacts. The crankcase is also protected from impacts thanks to a 30mm-thick plastic reinforcement at the front, and another one on the rear beam to prevent denting. On the front, the water pump is covered by a guard that rises high enough to protect it from splashes. Tested and approved by our experienced riders!
____________
Produit: www.axp-racing...
Conçu en plastique polyéthylène haute densité d’épaisseur 8mm, le sabot AXP offre une protection complète de votre moto. Très exposée, la ligne d’échappement est complètement protégée grâce au plastique PEHD qui reprend sa forme initiale après les impacts. Le carter moteur est également à l’abri des chocs grâce à un renfort en plastique de 30mm d’épaisseur à l’avant et un autre en appui sur la poutre arrière permettant d'empêcher les enfoncements. En façade, la pompe à eau est couverte grâce à un sabot qui remonte suffisamment haut pour la protéger des projections. Testé et approuvé par nos pilotes d’expérience !
Website: www.axp-racing.com
Facebook : / axpracing
Instagram : / axpracing
Contact : contact@axpracing.com
#protection #visitwebsite #offroad #axpracing #development #offroading #skidplate #bikelife #adventure #bikeadventures #adventures #adventureriders #trail #trailbike
no centre stand compatible...thats bad
Hello, the Honda centre stand is not compatible with the skid plate but other brands might be.
So do not hesitate to send us a picture of your centre stand so we can check the compatibility to contact@axpracing.com
Thanks!
@@axpracing no,i ll buy other brand.
Why not compatible? Size or hardware??
@@moulin680 Hello,
There is a 30mm plastic block on the rear of the skid plate (you can see it at 1:40 on the tutorial video). This reinforcement comes against the tube. The Honda centre stand is also fixed against this tube thanks to a welded block. So, if you remove our plastic block, then you should be able to mount the skid plate with the centre stand on, but it will reduce the resistance in case of crushing.
If you want a more detailed explanation, do not hesitate to ask us by email to x.dugardin@axpracing.com
Thanks 😉