Chevy Nova Quarter Window Trim Removal

Поділитися
Вставка
  • Опубліковано 28 сер 2024
  • How to remove the quarter window trim on a 68-74 Chevy Nova

КОМЕНТАРІ • 49

  • @samsalado5957
    @samsalado5957 4 місяці тому

    These are the videos I like. Thanks for helping and showing how to do these things. You’ve helped me out alot over the years.

  • @RaysGarage
    @RaysGarage 4 місяці тому

    John, Thanks for posting this video, going to help out a lot of Nova owners out there! I plan on seam sealing the short trim back on since my clips are broken and not usable. New clips are availble but cost $20 + ship and tax each. Thanks again!!!

  • @ejscarfo19
    @ejscarfo19 4 місяці тому +3

    OMG! Finally someone has a good video on this. Thanks a whole heep man! I have to do this on my 70 to install a set of polished trim. At least now I know what to do on the quarter windows. Hopefully you get to show how to install the trim on the doors one day. Love the channel.

    • @Shop209
      @Shop209  4 місяці тому

      Thanks!! The door trim just snaps on but it’s easy to damage. Unfortunately the door trim is very hard to remove without destroying it

    • @justincooper5189
      @justincooper5189 4 місяці тому

      The trim stripe has plastic clips that have a hole that has a narrow slot in it that the "pins" ( I call them that because I don't remember the exact term for them) will hold the trim in place on. I've seen them get removed, but the plastic clips get brittle and easily come apart, so most people take them off and leave them off. Normally if you're taking them off, a tap from a rubber mallet underneath the trim pushing up will dislodge it. Like I said though, they're easy to break.

  • @user-bo4jl5zk5c
    @user-bo4jl5zk5c 4 місяці тому

    Once again another good video! Best Nova channel out there! Thanks

  • @rockeyfranks4504
    @rockeyfranks4504 4 місяці тому +2

    I had to do this on a parts 74 nova I wish I had this video then

  • @davidpeters6551
    @davidpeters6551 4 місяці тому +1

    Great video. You never let us down, Brother. Thank you.

  • @BudFranks-fu9ye
    @BudFranks-fu9ye 4 місяці тому

    Thank you. Finally somebody knows 👍

  • @justincooper5189
    @justincooper5189 4 місяці тому

    I originally thought that trim was press fit, but I'm glad you made this video, because finding out it's screwed on saves a LOT of headaches and money.

  • @novadiecastman5251
    @novadiecastman5251 12 днів тому

    Thanks for the info Jon !! 👍 please keep up the informative videos

  • @joedeleon8376
    @joedeleon8376 4 місяці тому

    Dropping that knowledge brother!

  • @shawnp.livingthetruth8344
    @shawnp.livingthetruth8344 4 місяці тому

    This video has saved someone a bunch of headache. Thanks for another great video

  • @itseithergonnaworkoritaint7852
    @itseithergonnaworkoritaint7852 4 місяці тому

    Great info, good to know if I ever get another Nova.😎👍

  • @philipkruger563
    @philipkruger563 4 місяці тому +1

    Great info

  • @billchiasson2019
    @billchiasson2019 4 місяці тому

    Great video!! Thanks!

  • @SmallTownBuilds
    @SmallTownBuilds 4 місяці тому

    Nicely done!

  • @brandonscarfe8803
    @brandonscarfe8803 4 місяці тому

    Great content! Thanks

  • @joshuaemery6246
    @joshuaemery6246 4 місяці тому

    Great content!

  • @tonywest8140
    @tonywest8140 4 місяці тому

    Thanks for another great video. Very helpful to me. You almost got a screwdriver to the noggin, lol. I was like, whoa whoa whoa. I saved you, lol.

    • @Shop209
      @Shop209  4 місяці тому

      Yeah. I realized I was about to FAFO. lol

  • @raystevens687
    @raystevens687 4 місяці тому +1

    Oh get your needle nose point Viesgrips that way you can get a good grip on the Screw.

    • @Shop209
      @Shop209  4 місяці тому

      Yeah. I didn’t because the channel is in GREAT condition. Didn’t want to tear it pulling screw out. Only thing on that car that’s good. Lol

  • @reevesautomotivefarm9614
    @reevesautomotivefarm9614 4 місяці тому

    Nevr seen anyone adress this and i need to do this. Shared to Twitter/X

  • @josh_71chevy
    @josh_71chevy 4 місяці тому

    Very helpful. I'm de triming my car for paint. Can you point me in the right direction for the front and rear window trim?

  • @MikeWolf-427
    @MikeWolf-427 4 місяці тому

    Deja-vu 🤣🤣 Great Video!

  • @steverichardson1217
    @steverichardson1217 4 місяці тому

    Love the nova in joy the video’s what do you have for sale

  • @brianbloom1799
    @brianbloom1799 4 місяці тому

    You want to do a hard one to change, 67 Chevelle 300 deluxe rear window, what a Pain in the Butt, Theres a steel Casing that go's around a steel cage in rubber, then the new window rubber go's into that,What a time I had getting that to look nice, I have done lots of Nova's Oldsmobiles, and Buick rear windows,, Really It all matters how you feel for that day Hard will sometimes go easy, Some Easyone are a Pain Mine set Means everything. when working on cars.

    • @Shop209
      @Shop209  4 місяці тому

      Yep. The novas aren’t too bad. Having to take the back bumper off to get a window out seems a bit much unless you’re a GM engineer.

  • @fallofthezombies1379
    @fallofthezombies1379 4 місяці тому +1

    Random comment for the algorithm

  • @davidbrown-55
    @davidbrown-55 Місяць тому

    Great videos! Looking for a pass. Front side drip rail trim piece that goes under the a pillar beside the windshield? Please help

    • @Shop209
      @Shop209  Місяць тому

      Drip rail trim? I have a whole set plus a few pieces. I’ll have to check what my extra pieces are.

  • @HereIsRick
    @HereIsRick 2 місяці тому

    Any idea where I could get new clips for the upright pieces?

  • @jerrymeadors1192
    @jerrymeadors1192 4 місяці тому

    I know where a 72 Nova V8 car it has a big block heater core in it. Don’t think 72 come from factory with BBC car has title dude wants $1500 but I can almost bet he’d take less. It’s in Knoxville TN if interested message

  • @danclark2574
    @danclark2574 2 місяці тому

    Hey, great video my question is are the doors done the same way? I just ordered all the anodized trim for my car I already removed the trim around the windows after watching, still waiting on delivery of the new parts, so on the doors do they come apart or does the new trim for over it or what? Thanks for your input.great channel.

    • @Shop209
      @Shop209  2 місяці тому

      You’ll probably destroy the aluminum trim on the doors if you try to take it off. I have never successfully removed the door trim without damaging it.

    • @danclark2574
      @danclark2574 2 місяці тому

      @Shop209 thanks for the reply, to be clear the car has the regular painted trim from the factory, I boughtvthe stainless to put on in place of the plain trim if that helps. Thanks

  • @davidbrown-55
    @davidbrown-55 Місяць тому

    Is that channel felt supposed to have chrome bead on the edges? I need to replace mine and see chrome and no chrome edges. Confused!

    • @Shop209
      @Shop209  Місяць тому

      Every time I’ve replaced some the new one didn’t have chrome but I think it’s available with either

  • @growinupusa2652
    @growinupusa2652 4 місяці тому

    I’m the guy who painted Mike in Floridas 71 Nova (the marina blue with pearl one) , I didn’t see any screws on his all it had was an aftermarket slip that went in between the body and the window… is that right or do I need to put screws in it when I reinstall

    • @Shop209
      @Shop209  4 місяці тому

      The window channel will hold it in if the channel is screwed. The screws are a really short and weird size.

  • @jss6060
    @jss6060 3 місяці тому

    This has nothing to do with the window buuutttt…. I have a 69 nova. I got a nice set of 71 nova fenders. There were no fenders when I bought the car. I have the original fender louvers from my 69. Do you know the measurements of where the louvers should be placed on the fenders? Any help will be appreciated

    • @Shop209
      @Shop209  3 місяці тому

      I have ONE fender from a 69 that has the holes. I’ll try to measure and post a pic.

    • @jss6060
      @jss6060 3 місяці тому

      @@Shop209 thank you! I really appreciate it

  • @shamusdiecastkustoms8363
    @shamusdiecastkustoms8363 3 місяці тому

    Could anyone send me pictures of the hardware that Holds 73 taillight house against the body

    • @Shop209
      @Shop209  3 місяці тому

      I can try to post picture. I think it’s just speed nuts on the studs

  • @simpsonrdlarry4385
    @simpsonrdlarry4385 4 місяці тому

    How do I become a member? I don’t see the deal in the description

    • @Shop209
      @Shop209  4 місяці тому +1

      You have to use a laptop or regular computer or you can use your browser on your phone. Not the app. Once you log into UA-cam on your phone you can tap and the Aaa and it will let you switch to desktop mode. Then there’s a join button beside subscribe button on my channel. There are UA-cam videos on how to join with phone.