How to decommission an old burglar alarm (according to a YouTube poster)

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 22

  • @CameliaCraftsDesigns
    @CameliaCraftsDesigns 2 роки тому +7

    Yeah, I saw that video too😐 just followed his steps and guess what? Well you know what.
    It's Friday night and as none of my neighbours bothered to pop round to see if I was being burgled, and as I cut the battery wires🤭 I'll just wait for the battery to die😅
    I struggled to climb on a chair, so the ladder just isn't happening!
    Thank you so much for the video, you're a gem😊🤗💜

    • @tonipeters-looks-at
      @tonipeters-looks-at  2 роки тому +2

      @Camelia Crafts Designs I am happy to have helped. Thanks for the coffees 😀

    • @noamaanahmad1595
      @noamaanahmad1595 11 місяців тому +1

      I have a genuine question. Why would you cut/ permanently disconnect a security alarm system? Isn’t it good to have a functioning alarm system for safety reasons???!??!?

    • @finlays-crazy-life
      @finlays-crazy-life 3 місяці тому

      @@noamaanahmad1595they are just bells only, don’t deter much anyway. Need a monitored system nowadays 😊

  • @bigmoney4685
    @bigmoney4685 2 роки тому +5

    When theres no mains and backup battery inside the house the bell box outside will go off. Just wait for the bell box to stop then it wont go off again as theres no power to power it back up again. You dont need to take the battery out of the outside bellbox.

    • @nrg-5003
      @nrg-5003 Рік тому +3

      That may work but some older sounders don't have a cut off timer and assuming the battery in the sounder is still healthy (which some surprisingly are) it will sound indefinitely much longer than the legal 20 minute cut off so you risk a noise nuisance complaint and possible fine and you won't be able to stop the sounder unless you can reach it with a ladder and remove the battery.

    • @bigmoney4685
      @bigmoney4685 Рік тому

      ​@@nrg-5003nope you dont need to take the battery out of the external bell box when the alarm stops in 20 minutes it cant power back up as theres no mains and the panel inside the property has no battery. This works on new alarms. Done this many times.

  • @wlee9504
    @wlee9504 2 роки тому +3

    Exactly my problem. I'm trying to decommission a burglar alarm too. I disconnected the mains, then the battery and to my surprise - the alarm went off! I had to turn the mains back on and the alarm stopped. How annoying.

    • @tonipeters-looks-at
      @tonipeters-looks-at  2 роки тому +1

      I can only guess you saw the same video I did 😀 (Which got it so wrong)

  • @ArgaTheRexouium
    @ArgaTheRexouium 2 роки тому +6

    I am a alarm engineer myself and I wasn't a big fan of that video a few things not mentioned and then to replace a ok wired alarm system with a pile of crap DIY alarm

    • @alarmmuseum
      @alarmmuseum 2 роки тому +2

      Was it the one with the Sterling 10 and Pyronix Belle?

    • @ArgaTheRexouium
      @ArgaTheRexouium 2 роки тому +1

      @@alarmmuseum yes

  • @richthepontiacguys1412
    @richthepontiacguys1412 Рік тому +1

    Why disable a perfectly good Burglar Alarm looks like a good installation and working well

  • @cheriepope7422
    @cheriepope7422 2 роки тому

    Show how to disconnect please

  • @whatliesbeneathurbanexplor1631

    A lump hammer usually works 😂😊

  • @JDMusic-fXsT
    @JDMusic-fXsT Рік тому

    Securitech!

  • @Jess-wb4ux
    @Jess-wb4ux 9 місяців тому

    My alarm goes off soon as I take the fuse out! 😢😢😢

  • @Woodkin007
    @Woodkin007 7 місяців тому

    Drill hole in external alarm. Spray in expanding foam. Jobs a good'n.