I am one of the first Ender 3 users. I recently bought a K1 Max as my second 3d printer and it feels like this this was made 20 years in the future. I can’t believe how much money and time I invested in my beloved Ender 3, yet it doesn’t even come close to what the K1 Max is able to, approximately 15 minutes after you unboxed it. Great product, Creality 👍🏻
@@maximilianlindner same . I have 5 ender 3’s with all the fancy upgrades. A love hate relationship lol. But they are collecting dust now that my k1 max is in the farm. I hardly even look at them now lol
Thanks great insight. I was on the fence. I liked your noobs experience because that is exactly where I am. I am going to order this printer. Thanks again.
great vid. i have never used glue stick LOL but i do use hair spray - check ingredients and should contain some sort of vinyl! try get without scent. wash the bed with sop and water, dry and then a light spray at a distance of about 15 - 20 cm
I only use esun filament (mostly pla+) I print at 600mm/s on a Flsun v400, was thinking of getting another printer and I don't want to fork over the money for a bamboolab (not buying anything smaller than 300x300x300)
guess we are both middle aged nerds so chances were high! Great honest review, noise thing wasn't something I really considered which is a real thing to consider for small apartment people like myself. I might actually consider the max just have to ponder the max dimensions of my intended creations. Thanks bud! @@GadgetryTech
I have one, I wish I would have gotten a bambo labs. The hotend sucks, 1st one came apart\ the shaft part was welded into the heatsink... They sent me a new hotend but not heatsink... This happened on 1st print... a month later I finally get the hotend in which is suppossed to be an upgraded one, see I have no heatsink, they say they arent sending one... I had to buy one wait another 3 weeks for it to get in.... a week later the extruder stops working.... I ended up buying the new extruder from another website and buying another aftermarket hotened. I havent had too much trouble after that but buying the heatsink,3rd party hotened and new extruder with a spacer all cost me about $100...I also didnt get to use it really for the first 2 1/2 months of having it... I recomend using a side loader filiment holder or top loader, Also a riser for the top glass, it rubs on the tube for filiment and can cause problems sometimes too... besides the headache at first the printer has been fine but Now after everything I with I would have gotten the bamboo
I own one but I waited for them to work out the bugs . I rarely buy any first version of anything. With that said I have had zero issues with mine. In fact it’s now my go-to in my small farm! I’ll be buying a few more . I have printed pla, hips, asa, PETG and ABS. No issues
@@BVM-12 only look at reviews that are less than 2 months old. The latest version has the bugs worked out. Even they fixed the bug with the 1st version hot end it made it much better but still wasn’t perfect . I upgraded to the hot end that solves all the issues and haven’t had a problem since. The only print fails I get now is when I make an error in the slicer . I’m happy and plan to by more
I bought one and STRONGLY advise against getting one: quality control is non-existent, print quality is worse than my €250 printer, many failed prints, maintenace is a pain in the back and it's not noissy, the noise levels are infernal.
I am one of the first Ender 3 users.
I recently bought a K1 Max as my second 3d printer and it feels like this this was made 20 years in the future. I can’t believe how much money and time I invested in my beloved Ender 3, yet it doesn’t even come close to what the K1 Max is able to, approximately 15 minutes after you unboxed it. Great product, Creality 👍🏻
@@maximilianlindner same . I have 5 ender 3’s with all the fancy upgrades. A love hate relationship lol. But they are collecting dust now that my k1 max is in the farm. I hardly even look at them now lol
Pretty cool. Good to see you branching out to other types of products. Thanks for your honest opinion
Thanks great insight. I was on the fence. I liked your noobs experience because that is exactly where I am. I am going to order this printer. Thanks again.
There is a side mount spool holder in the pre-sliced files.
great vid. i have never used glue stick LOL but i do use hair spray - check ingredients and should contain some sort of vinyl! try get without scent. wash the bed with sop and water, dry and then a light spray at a distance of about 15 - 20 cm
ELFL - Black Sunrise .... Great choice of music!
Thanks for posting this video.
Hey man great video I really enjoy your content. Would to see you do a gaming pc build tutorial or review some pre built gaming pcs
I only use esun filament (mostly pla+) I print at 600mm/s on a Flsun v400, was thinking of getting another printer and I don't want to fork over the money for a bamboolab (not buying anything smaller than 300x300x300)
Should do a headset review video for the top 3 headsets for Xbox, PlayStation, and PC for various games such as fps, racing, rpg etc.
Creality really on marketing overdrive. Put half the budget into fixing the printers and you’ll do just fine!!!
Just a quick question
Hyperx Cloud 3 Wireless
OR
Hyperx Could Alpha Wireless
Wait a bit and maybe get the creality K2
Can you vent the fumes?
Excuse me the glue need every time i want to print i put in the board and the filament all brand work with it
oh heck yes, was just looking at this what are the chances.
omg no way hahah. I guess better than we thought?
guess we are both middle aged nerds so chances were high!
Great honest review, noise thing wasn't something I really considered which is a real thing to consider for small apartment people like myself. I might actually consider the max just have to ponder the max dimensions of my intended creations. Thanks bud! @@GadgetryTech
I have one, I wish I would have gotten a bambo labs. The hotend sucks, 1st one came apart\ the shaft part was welded into the heatsink... They sent me a new hotend but not heatsink... This happened on 1st print... a month later I finally get the hotend in which is suppossed to be an upgraded one, see I have no heatsink, they say they arent sending one... I had to buy one wait another 3 weeks for it to get in.... a week later the extruder stops working.... I ended up buying the new extruder from another website and buying another aftermarket hotened. I havent had too much trouble after that but buying the heatsink,3rd party hotened and new extruder with a spacer all cost me about $100...I also didnt get to use it really for the first 2 1/2 months of having it... I recomend using a side loader filiment holder or top loader, Also a riser for the top glass, it rubs on the tube for filiment and can cause problems sometimes too... besides the headache at first the printer has been fine but Now after everything I with I would have gotten the bamboo
Why do yall think people wanna sit through y 5-7 mins of your setup process? Lol! How does it print…..period
I own one but I waited for them to work out the bugs . I rarely buy any first version of anything. With that said I have had zero issues with mine. In fact it’s now my go-to in my small farm! I’ll be buying a few more . I have printed pla, hips, asa, PETG and ABS.
No issues
I really want one but see so many mixed reviews.
@@BVM-12 only look at reviews that are less than 2 months old. The latest version has the bugs worked out. Even they fixed the bug with the 1st version hot end it made it much better but still wasn’t perfect . I upgraded to the hot end that solves all the issues and haven’t had a problem since. The only print fails I get now is when I make an error in the slicer . I’m happy and plan to by more
I bought one and STRONGLY advise against getting one: quality control is non-existent, print quality is worse than my €250 printer, many failed prints, maintenace is a pain in the back and it's not noissy, the noise levels are infernal.