This is hands-down the nicest wire bender for this general-purpose wire bending I've seen and I've been searching YT for days and days in my free time. Nicely done. This design is what I'll build. Thank you.
@@DaveSmith-cp5kj yeah.. but see what happens if you start with top notch and suddenly have to work with these machines : you are f#ckt! But starting with less fancy machine park and learn your trade... then after a while invest in the good stuff... You end up with precise Machinery matched with precise skills..😎
Outstanding. Sometimes I just mute the background but I didn’t even notice the music because I was enthralled in all that excellence. Precision. Beauty. Thank you.
Watch the video and turn off the music and then replace it with your own music,problem solved, everybody likes their own music, I bet you don't like your young sons music.
Nice Job, I'm gonna stuff this idea in my idea file towards the back left side of my brain, right next to the file called "How to mechanize chain maille production."
что бы согнуть проволоку, которую можно согнуть круглогубцами, мне потребуется целый станочный парк, и самый главный вопрос нахуя мне надо вот так гнуть проволоку? тем более радиус сгибания никак не изменить
I am a beginning machinist. I am a avid fisherman. I would be glad to pay you for a drawing or pay you to make me one of these benders. Please respond. Fishing opener here in Mn is May 8th. Thank you very much.
Please don't hammer on the open jaw of a vice. It will ruin its alignment and potentially crack castings. If you must use your vice this way at least close the jaws firmly. Just saying...
Nice. But that incessant, obnoxious, repetitious head-pounding "music" bed! Why is it deemed mandatory for every friggin' video out there to have a music bed? Adds nothing, detracts much.
Je te donnes pas 2 semaines d'espérance de vie sur une fraiseuse si tu clames pas ton étau sur la table xD WTF sérieux ! Ca donne envie de montrer ta video en cours de prévention
Why? Because it's not delicate harp backed by the tickling of ivory piano keys? If you don't like the music, or if it's distracting you from the video then may I suggest just turning the volume down as opposed to complaining? Just a thought.
This is hands-down the nicest wire bender for this general-purpose wire bending I've seen and I've been searching YT for days and days in my free time. Nicely done. This design is what I'll build. Thank you.
1:35 as someone who does machining for a hobby, the level of chatter in your drill press setup gave me an aneurysm. 10/10 subscribed!
6:54 agghhhh the visible runout in that drill chuck! My eyes, my eyes!!! (jokes aside this is a sweet project)
Just goes to show you all the people complaining about not having quality machines doesn't mean one can't make a good product if we really tried.
@@DaveSmith-cp5kj yeah.. but see what happens if you start with top notch and suddenly have to work with these machines : you are f#ckt!
But starting with less fancy machine park and learn your trade...
then after a while invest in the good stuff...
You end up with precise Machinery matched with precise skills..😎
should be called DIY Mini Bender from a steel screw, a bunch of steel and a machine shop
Very clever and well done. Thanks.
Nice bender, thanks for showing your build.
Outstanding. Sometimes I just mute the background but I didn’t even notice the music because I was enthralled in all that excellence. Precision. Beauty.
Thank you.
Отличная работа!
Great project well executed. Grate music should be executed.
Great idea bro...Music is awsome.,👍
Neat little tool, thanks for the method.
Super helpful, thanks!
Spectacular project! You are a talente man 🙏
Excellent tool
Excellent workpiece and that’s I need it 🙏 👍
At 6:30 - that angle grinder less than a cm from your thumb. Oooh!
Yeah that was hands down the most retarded thing I’ve ever seen someone do. Definitely not keeping his fingers for long
Metal bender mini..bagus hasilnya 👍👍👍🤝🇮🇩 indonesia
C'est beau à regarder, il y a de la magie dans ce travail 👍
Clamp down the machine vice it’s safer and you’ll get a better finish.
Very useful superb 🙏🙏🙏🙏🙏🙏
С наступающим Новым Годом!!! Успехов, счастья и здоровья!
Do you have another method for making a wire bender without using a Drill , Lathe , or Angle Grinder ?????
Loving it!
Are you able to share the schematics for this? I have been looking all over for something like this and this is the only tool that fits my needs.
That drillpress vice gives me anxiety lol
Nice video but the music doesn’t help at all.
Watch the video and turn off the music and then replace it with your own music,problem solved, everybody likes their own music, I bet you don't like your young sons music.
I like that.
Awesome ! , Is That A Brass Tube ?
Nice Job, I'm gonna stuff this idea in my idea file towards the back left side of my brain, right next to the file called "How to mechanize chain maille production."
Built the way you want it and will probably outlast a commercially available one.
All you need is a….. fully stocked machine shop
Buen trabajo... Gracias por compartir tu idea y desarrollo.
Me interesa saber si haces este tipo de dadoso trabajo y lo vendes.
Saludos desde México
Very nice
что бы согнуть проволоку, которую можно согнуть круглогубцами, мне потребуется целый станочный парк, и самый главный вопрос нахуя мне надо вот так гнуть проволоку? тем более радиус сгибания никак не изменить
How or where can I buy a wire bender😅
Excellent but the music is super annoying and totally unnecessary.
Try bolting your vice to the drill press on your next video…..
Do you make these to sell
Nice little bender. We shared this video on our homemade tools forum this week :)
verry good
I have requires this tool for 1.6 mm wire bending
I am a beginning machinist. I am a avid fisherman. I would be glad to pay you for a drawing or pay you to make me one of these benders. Please respond. Fishing opener here in Mn is May 8th. Thank you very much.
👍
From a steel screw..... And other bits.
I guess everyone owns a lathe to do this DIY project!
Please don't hammer on the open jaw of a vice. It will ruin its alignment and potentially crack castings. If you must use your vice this way at least close the jaws firmly.
Just saying...
I have CNC machine from this job
music too loud
👍👍👍🇧🇷🇧🇷🇧🇷
well, you need a lot of tools to make that tool...
Nice. But that incessant, obnoxious, repetitious head-pounding "music" bed! Why is it deemed mandatory for every friggin' video out there to have a music bed? Adds nothing, detracts much.
Music is fine with me. Better than just machining sounds, which is soothing to me
Interested in buying
Can you please make me one? Thanks
Nice tool but a totally clickbait title - hardly made from a steel screw is it!
Well it's from chunks of metal and large bolts mainly lol
@@bigbasil1908 and a large, fully equipped machine shop.
brao serbijaneeeeeeeee
E precisa de tudo isso só pra fazer isso???
I’m shore I have plenty of steel that size but no screws
That's a bolt !
Ak.ta.machin.paba.jabe.ko.to.dam
6:26 - Oh my God!! Please be careful with your fingers! Could easily have used a set of pliers :-)
the guy hasn't even clamped his vice, drills and mills at all costs lol. I think he skipped mechanics class
Nice vid but terrible music…
gjbbbbbbbb tollllllll
Was the chicken you cut worth the frog you scared?
dude. your video is cool, i really enjoy the content, but your music is horrendous. it's super repetitive and maddening
+
Je te donnes pas 2 semaines d'espérance de vie sur une fraiseuse si tu clames pas ton étau sur la table xD WTF sérieux ! Ca donne envie de montrer ta video en cours de prévention
lose the music, it ruins the video.
That’s what the volume icon is for.
Sad old man 🤣
Why? Because it's not delicate harp backed by the tickling of ivory piano keys? If you don't like the music, or if it's distracting you from the video then may I suggest just turning the volume down as opposed to complaining? Just a thought.
I can help you, just buy a round pliers and you will have more time in a place to invent unnecessary things.
... херотень какая-то безпонтовая 😜👎!!!
А если ещё и стоимость этой хрени посчитать! Полдня работы...
seriously, why the music? horrible.
Excellent tool