How to Install a Big Mouth Ram Air Upgrade for my 2020 Ford Ranger! More power and fuel economy?

Поділитися
Вставка
  • Опубліковано 26 лип 2022
  • Not sponsored! I purchased with my own money.
    Big Mouth Air Ram www.velossatechdesign.com/col...
    Installation Instructions: cdn.shopify.com/s/files/1/003...
  • Навчання та стиль

КОМЕНТАРІ • 74

  • @aidenhernandez5296
    @aidenhernandez5296 2 роки тому +1

    I watched your videos when I installed my afe intercooler pipes and now I have another great how to for the intake I just ordered yesterday, you the man 👍🏼

    • @MicahMartinDIY
      @MicahMartinDIY  2 роки тому

      That's so cool Aiden! I'm so glad I could help you! You're going to love this upgrade!

  • @tribalsean
    @tribalsean 2 роки тому +1

    Fun video! I'm putting one in this weekend. Thank you for play by play, appreciate it. Keep on keepin on, brother

    • @MicahMartinDIY
      @MicahMartinDIY  2 роки тому +2

      Sean, you're going to love it. Super easy to install and totally not a gimmick!

  • @user-rp2vx8ip4n
    @user-rp2vx8ip4n Місяць тому

    Thank you. I just installed that Ram Air and the AFE Intake pipe this morning. Your video was a big help. I also installed the Ford Performance ProCal pack all together. Huge difference in pickup. Really woke up the engine.

    • @MicahMartinDIY
      @MicahMartinDIY  Місяць тому

      That's awesome! Glad my video helped a bit!

  • @kriswinger9391
    @kriswinger9391 2 роки тому +4

    Totally awesome to hear!! I've just ordered a Gen 4 for my 2020 Ford Ranger XLT Super Cab 4x4! I already have a full aftermarket Mishimoto enclosed cold air intake with their built-in air scoop similar to your AFE scoop. My cold air intake has the non-oiled "dry" cone air filter so no over-oiling or fouling of sensors etc. I also have a custom Livernois Motorsports tunes which I run the "towing" tune for my daily driving due to the fact that this tune emphasizes low to midrange torque. I also have a Mountune Performance heavy-duty, high capacity intercooler to combat the heatsoak issues of all Ford EcoBoost motors + for more consistent performance. I also added an AWE Tuning 3 inch stainless steel exhaust system for some more power + a deep, subtle exhaust note. On my stock (non-FX4) 30.1 inch tires (255/65/17) I consistently get 22-25 MPG in nice weather in everyday mixed/work driving. I've gotten as high as 28.5 MPG (hand-calculated) during highway driving with the cruise control set at 70 MPH. I look very forward to the nice, noticeable power increase you state as well as the 1-2 MPG increase Velossa Tech claims!

    • @MicahMartinDIY
      @MicahMartinDIY  2 роки тому

      Good to hear Kris! You're going to love it! I'm taking a road trip to the beach today and I'm looking forward to seeing my MPG increase! It also makes it more fun to drive, if you can imagine. I love my Ranger, as you can see by my videos.

  • @velossatech113
    @velossatech113 Рік тому +6

    Hey! Great video Micah. Love your honesty. We are super proud of this one and so glad the community really understands the product and enjoys the benefits. Let us know if you have any suggestions or new products for the Ranger :)

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +1

      Thanks so much VelossaTech! I did really enjoy the simplicity and ease of installation on this Big Mouth upgrade! If you have anything that you'd like me to test for you let me know via e-mail. uprootedyankee@gmail

    • @josephremo
      @josephremo Рік тому

      hi, is this compatible with the new gen ranger?

    • @benbowers8670
      @benbowers8670 11 місяців тому

      Hi @VelossaTech
      Would you be interested in letting me review it t for the UK and European market?

  • @bigal7561
    @bigal7561 Рік тому +1

    Very nice. I've modified almost everything on the outside of my 2020 Ford Range XLT FX4 off road so now I'm going to do some more. I like this truck. The turbo is cool and the engine has some bight. Going to order this. Real easy install now I'm wondering about the ram air using the stock hood and air infiltration strips. Looks like a winner.
    Looking forward to you next and my next purchase. Well done

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      Thanks Al! Yes, this was a fun upgrade and you can definately feel the results!

  • @briany8394
    @briany8394 2 роки тому +1

    Great video as always!

  • @coastalmasonry4021
    @coastalmasonry4021 Рік тому +4

    Hello Micah. Thank you so much for the great content! Now that it has been months from all the mods you have done, would you do a video on which ones have been most beneficial in value over cost and which mods are you thinking of doing next?? Big fan of your videos teaching us step by step how to install mods. Again, thank you!

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +2

      Thank you so much! Feedback like this is why I continue to fil how to videos. I love helping people, especially with things that save them money. I did an update video a while back (it's in my Ranger playlist). I can do an updated one soon as well though.

    • @coastalmasonry4021
      @coastalmasonry4021 Рік тому

      @@MicahMartinDIY you are the man!!!

    • @coastalmasonry4021
      @coastalmasonry4021 Рік тому

      @@MicahMartinDIY coming any time soon? Looking forward to it!!

  • @dargall1
    @dargall1 Рік тому +1

    Very interesting. It kinda reminds me of the intake scoop on the WWII P51 Mustang with that big scoop underneath. But in this case the scoop is hidden.

  • @michaelschultz2773
    @michaelschultz2773 7 місяців тому +1

    Just did this to my ranger what a difference

    • @MicahMartinDIY
      @MicahMartinDIY  7 місяців тому

      I'm glad you like the upgrade! I was suprised when I got a noticeable difference!

    • @michaelschultz2773
      @michaelschultz2773 7 місяців тому

      Sport mode changed the most in my opinion

  • @ryanf9997
    @ryanf9997 Рік тому

    Installing the screw on the left bracket was a pain. The directions it came with didn't help but your video pretty much got me there even though you couldn't film it. As you said remove the 10M screws from the grill so you can get your hand down there. Install the screw on the left first and try to get it through the bracket and line it up so you can use an allen wrench. It took me 15 minutes just to get it lined up to screw it in but I finally got it done.

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      Yeah it was a pain, sorry for not being able to film that portion of it well. But I'm glad you got it done!

  • @ia6980
    @ia6980 Рік тому +1

    Thank you!

  • @fidstang
    @fidstang Рік тому +4

    Complete honesty here. The turbo will pull more air then the ram effect from driving speed. Only thing I can see, is that it actually blocks part of the air path to your radiator.

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +3

      Well I can for sure tell the difference in power. So I'm happy with it.

    • @fidstang
      @fidstang Рік тому +1

      @@MicahMartinDIY Always a good thing to be happy with your purchase. A B testing would be needed to see if there are really gains.

    • @velossatech113
      @velossatech113 Рік тому +7

      Hello! Yes you are right, the turbo will 'pull' air, however giving the turbo an easier way to 'pull' air by increasing inlet dynamic pressure is what allows the turbine to run at a lower speed for load targeting tunes. This increases mass flow for boost targeting tunes. Let us know if you have any questions, aero design is our thing :) Also, no worry about blocking the radiator, we tested this product for months in the scorching humid heat of Florida and no issues with cooling at all! The truck loves it! Stay in touch.

    • @TheKingfish86
      @TheKingfish86 Рік тому +4

      @VelossaTech I have not purchased yet for my ranger just concerned on how much rain would get sucked into the air filter.

  • @J-on-that_bike
    @J-on-that_bike Рік тому

    Next mod nice video 🙏

  • @lang0005
    @lang0005 7 місяців тому

    Just bought one, wish it wasnt so much though, and still waiting on the mail. I wanted to get it on before a long trip because that is where it should have the best effect. Ill post how much mpg it increases.

    • @MicahMartinDIY
      @MicahMartinDIY  7 місяців тому

      Sounds good, I do like the product! It for sure makes a difference.

  • @roywood9683
    @roywood9683 Рік тому

    I JUST INSTALLED MY WIDE MOUTH AIR SCOOP. THE ONE ALLEN BOLT IS OUTRAGEOUS TO INSTALL WITHOUT REMOVING FRONT GRILL. IT FITS LIKE IT SHOULD ALTHOUGH I DONT KNOW IF IT WAS WORTH $139.

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      Good to hear Roy! Yeah I had that same issue with that silly bolt!

  • @ddroz23
    @ddroz23 5 місяців тому

    I just see fractionally more pressure at moderate speed. The grill is diffusing the ram effect. The plastic guard has the same diameter intel. Marginally you could get cooler air and high pressures. I like how it directs smoothly into the the weird hood piping but there are a lot of restrictive curves.

    • @ddroz23
      @ddroz23 5 місяців тому

      I just built one with a piece of cardboard and $2 worth of Black Gorilla tape. Lets see how it goes.

    • @MicahMartinDIY
      @MicahMartinDIY  5 місяців тому

      Wow! Cardboard and gorilla tape! I'd like to see a picture of that.

  • @dogthat
    @dogthat 10 місяців тому

    Just put this in, if I paid attention to the different length of bolt’s it probably wouldn’t have taken me so long to put in. 😅 me over here wondering why the bolt won’t go back any further 😂… then dropping both bolts into hard to get out areas.😮 there were also lights installed in my grill witch I had to move out of the way to use the extension through the grill, since I didn’t unbolt that part.

    • @MicahMartinDIY
      @MicahMartinDIY  10 місяців тому

      Oh yeah, it can be tought to get in there for sure!

  • @wambam3564
    @wambam3564 Рік тому +1

    Noice! Now pair it with GFB diverter valve VTA :)

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      Thanks! I have upgraded my factory blow off valve already. (video is in my Ranger playlist) Does this do the same thing?

    • @wambam3564
      @wambam3564 Рік тому

      @@MicahMartinDIY yes and better. search on here for 2020 ford ranger with gfb vta. Someone did a review for it.

  • @princebarrera8881
    @princebarrera8881 Рік тому

    Ordered mine about 5 days ago and they haven't shipped it out yet. How long after ordering did it take for Velossa to ship yours?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      I'm pretty sure mine took around 5 days. Good luck!

  • @7381366
    @7381366 7 місяців тому

    Get that ford performance tune! Truck wakes up significantly

  • @iglopez63D
    @iglopez63D Рік тому +2

    I wonder if I can install it on my Roush Ranger. Will it mess up the Tune?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +1

      I've driven almost 3,000 miles with it on and haven't had any issues! Go for it!

    • @Jake_4x4andcooks
      @Jake_4x4andcooks 4 місяці тому

      @@MicahMartinDIYhello!! Thanks for sharing! Is it required to get a tune if I get one of these things?

  • @lang0005
    @lang0005 8 місяців тому

    Any idea if it affects the ac/heat at all with less flow through the coils?

    • @MicahMartinDIY
      @MicahMartinDIY  7 місяців тому

      I've had it for months now and driven over 20,000 miles with it installed and have not had any issues at all.

  • @roywood9683
    @roywood9683 Рік тому +2

    did you check your mileage? better fuel economy?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +2

      Heck yeah! It went up nearly 2mpg! I made an update video on this. Check my Ranger playlist.

  • @guppygb6078
    @guppygb6078 10 місяців тому

    Wouldn't this block some if the air going to the intercooler and radiator?

  • @Brimar7
    @Brimar7 Рік тому +1

    I have a 2021. Does this affect the warranty?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      I am not the Gospel on this, but I don't see how it would. You're just letting more air in. I've been running mine for several weeks now and the truck loves it! Improvement in mileage too!

  • @roywood9683
    @roywood9683 Рік тому

    have you installed an oil catch can ?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому +1

      Yes, I have! You can see the video on my Ranger playlist.

  • @DavidHernandez-hc6xm
    @DavidHernandez-hc6xm Рік тому

    Can a roush intake increase my mpg

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      I'm sure it would. Not so funny story: I ordered the Roush kit and they sent the wrong size cone filter. They gave me such a hassle I would up just sending the whole kit back for a refund.

  • @edwardcampbell3420
    @edwardcampbell3420 10 місяців тому

    Do you have k/n filter?

  • @iannuttall8649
    @iannuttall8649 Рік тому

    Would a snorkel do the same thing?

    • @MicahMartinDIY
      @MicahMartinDIY  Рік тому

      I doubt it. Because the snorkel has a few bends that would not "ram" the air straight into the filter box. I don't think they face forward either.

    • @paulspeight8398
      @paulspeight8398 8 місяців тому

      At the very least you can use the full 80cm wadding ability more safely with a snorkel fitted that Ford allows for the Ranger,🤔 As far as I see fitting this just allows a larger air intake for any bow wave of water 🌊🌊to be ingested then its and possibly a new engine

  • @LuijaVlogs
    @LuijaVlogs 9 місяців тому

    no need of tune up?