421 Small Block Chevy NEARS COMPLETION just in time for PRI!
Вставка
- Опубліковано 28 лис 2022
- I’ve been missing my old Malibu something terrible. I cannot wait to hear it run again! Only THIS TIME, I’ve built an engine that pushes the limits of the daily driven category. Pump E85, hydraulic roller cam, Overdrive Transmission, power steering, power brakes, A/C, heat, wipers, all steel, all glass, and complete intact factory interior.
OLD SCHOOL! Follow along as I start from scratch on the new engine for #CrackaBarrel! - Авто та транспорт
Jeremy is gonna show up to marks one day and there’s gonna be a picture of him with buckshot holes in it taped to the door
They probably already have one on a dart board in the back...lol
A loyal fan should make that and send it to Mark
Classic guys, too funny!
Ohio is more of a "slug" state, I'm guessing.
No better way to unwind at the end of the night before bed. Best channel on youtube!! 💚💚💚
Lol. I like the morning videos. Although I may or may have not spit my coffee on my keyboard once or twice. 😂
2nd that!
You right about that buddy it's thebest channel by far the love they have for one another is amazing we don't have that in these parts they are very blessed
This channel brings me back to life every morning being a midnight guy! Thank you
I love everyone on the Old Man Crew, they are humble, fun, and wise. Your a great editor and director, keep up the good work!!!
Third shift here Bill, thanks for keeping us in the loop, we appreciate everything, thank a million for the best content on You-tube!😊
“ Krylon Kenny” rises to the occasion!😊
Uncle Bucko needs to have a class in interpersonal interaction skills with other people, LOL!!!
Can’t wait to hear the 421 hittin a lick ! That thing will be a torque monster I bet ! As always you knock the videos outta the park Bill. Nice job !
MY FAVORITE GARAGE CHANNEL 😁👍
Second shift here bill. Thank you so much I always end up watching you after I get off at 2am and lay down to relax for a little bit. Thanks for always uploading later on! Favorite garage channel out there no doubt!
When I first seen this truck on young and boosted I hoped since I couldn’t get the truck I hoped someone like your dad would get it and appreciate it
Hey Bill I wanna give you credit for your videos and the way you edit them always top notch they're always interesting and enjoyable to watch also love when you chipmunk Vicky LOL
Uncle Bucko is pure comedy gold!
Keep up the good work Bill!!
Loving the Squarebody updates. Don't see them that clean and original very often any more. Realy looking forward to seeing what the 421 pulls on the dyno.
I really love the whole dynamics of your family and friends!
If the world had more families like yours we wouldn't need to worry.
Just one favor to ask MORE videos in detail like the old days. I'm not complaining just want more content less editing out the funny stuff. Love Ya'll keep up the good work.
All of you guys are doing a great job. So enjoyable to watch. Stay safe
Thank you very much.
Thanks for the new video Bill . Mark is going to punch Uncle Buck o in the coca nuts if he keeps on!
Right in the giblets!
Chumpy
Look forward to more on the Malibu thanks so much to the whole omg crew . Uncle bucko is always funny 😁
All I'm gonna say is...poor Uncle Mark...!!!🤣🤣 great job on the new truck...looks great so far..!!!
Not second shift, I’m first. However I make sure I’m at work an hour early to watch anything you or your sons upload. Makes my day 10000% better! God bless
Where homer? I miss seeing him! But hey wish everyone the best in life! Always put a smile on my face! No matter what happens! Thx once again for the video! Never a dull moment
He retired.
Can't wait to see the Malibu back in action with the new motor!
Keep sneaking us hints about an event we've never heard of, we need to discuss it! Have some ideas that could be seriously epic AND go along with the game you all play in. Looking forward to hearing this new heart of yours fire up Sir. We'll see you in Indy for PRI!
Thing 2 is innocent!!
Coming along nicely can't wait to see how good the Malibu runs 👍
Coming together nicely on all fronts!
Uncle bucko looked high on krylon Kenny's fumes.
You talking engines. With a thick southern accent,you could be talking Indians. Happy to see that c10 for your dad is super clean. It's a real beauty. I love those colors.
Another great video with lots of valuable technical information on valves, springs and cams!
You soon appreciate just how much technical work goes into setting up a new engine for the first time.
Thanks again, Graham. UK
Can’t wait to hear that new engine sound off in the Malibu
I had to get different pushrods when I put a roller cam in my 461 Olds motor. The adjustable pushrod helped alot in getting the correct lenght and the techs at Smith Brothers were great to work with. The Harland Sharp rockers stay dead on the valvestem throughout full travel of the cam. I also degreed the cam. It was 4 degrees off. The adjustable timing chain set took care of that. Keep the tech tips coming....great info!
I guess you guys are not going to go to dig or die. And once again another great video that are very easy to watch and the way you do the voice over works perfectly
My favorite thing to watch after work!! Let's goooo
Always worth not being able to sleep when you get up to a good video! 🖤 Jeremy's description of Autozone makes me feel a little bit better that it must just be the average employee they have everywhere. Drives me nuts having to deal with the majority of the people that work there...
I dont even go to an auto zone or advance anymore always a headache I go to o'Reilly's
Autozone: You have questions? We have blank stares and dumb looks.
Its not even worth going in there. They put an O'Reillys in the small town that is only 13 miles away from me, so I don't have to drive 22 miles to Napa for basic stuff.
@@kevinshore8103 O'Reillys isnt any better around here, none of the large chain stores are for that matter. We have a small family owned parts store in town that are the only place you can be sure they know what you are talking about. Anymore though i just use Rock Auto, cheaper and less hassle...
@@SweatyFatGuy This!! Small town but the NAPA is great. 2 old timers and 1 chick who all know thier stuff and go out of thier way to order special parts. Ill gladly pay a little more.
Autozone is gonna hire anyone who needs a job cant expect experience for min wage
“Surprise chump hole”. 😂 Thanks for making me spit coffee everywhere! Lol!
You guys are making good progress.Looks like the team at SRC has made big gains on Billy's S10 also.Vicky looks like she is almost ready for Christmas.
Mark is just the fella you want to get your parts and a laugh from, great friends ya got Bill.
hance
Bill! Would you please tell Mark at a A-1 that he has a lot of fans in UA-cam land and I wished we still had his kind of auto parts store here in Pensacola!!
Excited for the new small block! 👀
Im enjoying all the content on this channel. It's always exciting and I learn new things every video. Thanks Mr. Bill for your time and SRC with your sons builds. Looking forward to see the maibu with the new engine..🇺🇲🏁
Another Great Video, Everyone needs a Uncle Bucko to keep the Blood Pressure from getting to low
LOL, Bill looking for the next Video Always appreciate your time and effort, Bob is very impressive at all times, Watched THE SRC video and was very impressed with how Billy, Uncle Rob and Tommy are hard at it
Have a Great Day,
God Bless The OMG Team
God Bless America 🇺🇸🙏🇺🇸🇺🇸
Imagine what it sounds like when uncle Bob says it's minty...!😳👌
Please do sick week! That would be awesome. Such a well put on event.
Always a part of my day I enjoy ridding to work listening to what all your guys got going on for the week !
As of Monday afternoon I became a grandpa for the first time...I get to watch this go to work for a few hours and then go see my grand baby after that...keep up the great work Bill
Congratulations
@@alandavis1245 thank you
Thanks for sharing this.
Enjoy your day 🤗💛
Just such a great group of people thank you!
5am and I can't think of anything better to watch after work. Love it !
Just getting up for work. Thanks for all the great videos bill, everyone really looks forward to these…that you sir!!
That 421 warms my heart
I can’t wait to hear that 421 run keep up the good work bill
Wow the Malibu is going to be a beast, that thing is a sweet street car. Great video Bill
Another killer video! Love the old square body’s.
Great to see u guys doing good makes me happy seeing good people being successful
Hey Bill! Great content. You know you can’t change U Buck O because he bring’s just a good flavor to the channel just love his purity! The motor is looking good for the Malibu and Dad’s pickup is really starting to come together he will just love it. Tell Miss Vicky to watch those great looking Xmas decorations with this bad storm coming in a lot of high winds. Stay safe! 😀😀❤️
Get it done old man looking good.
Love this Channel the best one on you tube
God great your doing so good Bill much love from Michigan
Very good Sir, very good!! 👍🏻👍🏻
Great video Bill can't wait to see the Malibu running again.
Holy Cow! Can’t wait to see the dyno session with the 421!
Dang great job on that motor,you and Bob have built a monster. Good luck on PRI!!
Love watching the Old Man's Garage Love you guys.
Looking forward to hearing this motor on the Dyno! Keep up the great work Bill, much love from Ky!
Everything is looking great! Your mom & dad's C-10 is a beautiful truck! God bless you guy's!
Man I know how much work all those camera angles are to do going thru town and stuff. Very cool man your channel is gonna end up blowing up just watch. Great job old man haha
Thank you. It’s more work than many realize. Especially doing it all by myself.
Awsome video you all rock be safe and warm
Way to go. Getting a hole lot done.
I like watching your videos and it looks like things are slow coming together and good luck and God bless you guys
Finally more 421 video 🎉
Getting excited for the 421 build, wish I was closer, I'd come to PRI to meet ya in person, look forward to next video
My 421 made some pretty good numbers,best of luck Bill.
I am excited to see yall wrenching on a old square body I have 3 of those trucks they're my absolute favorite. That truck is legit
Hey Bill ❤❤❤❤ all your content
Holy smokes I needed this. Was out in the cold rain today ( Wednesday ) unloading grain trucks. What a great time to kick back in the recliner and watch some OMG. Thank you for sharing.
I really enjoyed your video Bill as always can't wait to see the Nova back together again and ready to run as always may God bless you all keep you and Miss Vicky and everyone associated with y'all healthy and safe from the Old Man in Tampa Florida God bless
Loving it!
Great content thumbs-up. Bill& BUCKO, brotherly love funny as heck gotta love it. God bless all
Awesome video man!
Hope to see that small block painted Chevrolet Orange
Wish I had friends like you guys
Can't wait to hear that new small block!!! Great video. That 80 chevy pickup is real nice , I had one just like it only two tone grey with a 355. Wish I still had it
Great signs are coming I've been waiting lol 😆. Excited
I like dad's 80 Chevy truck it's nice
I love the videos! Just wish I could watch this all day. 😂
good work guys!
Thank you for sharing.👍🏻👀
Hey buddy glad to see you guys again good to see your make headway on your new engine can't wait to hear it run Man Jr has been making some hell of progress on the S10 I watched little bit ago the truck going to be super fast can't to see it on the street again you have a blessed night and a good day good night from your buddy in Oklahoma home of the 405
Great video 👊💪🏁
Awesome I've been wanting on mine
Love the channel
Thanks again Bill
Hell yeah. 3rd shift thanks you.
Sick week and rocky mountain race week would be epic
Hi Bill couldn't sleep thanks for the video glad the new 400 runs good awesome new truck for your dad. Awesome signs that 421 looks like a bad power plant.
Thanks for doing your best to keep the tried and true sbc relevent in todays world of ls and coyote engines .
I've been running a isky cam in my sbc for a few years now and absolutely love it, its awsome to see you using there stuff 👌🏼🇦🇺
Thanks for watching send a direct message right away I will love to hear your thoughts on it and for more enlightenment👆♥️^^*
Back to back bangers. Bills Daily vlogs 😂
I roll in after clocking out at 5am, and Old Man has a video waiting for me. I eat my dinner and enjoy the entertainment. The whole bit with Uncle Bucko, and Mark at A1, is comedy gold. I know its not a bit, but real life is damn funny, and really entertaining somes times lol. You are TV for regular folks and motorheads, and I happen to be both. Can't wait to see Crackabarrel makin hits with the new mill. Just ordered my new zip up hoodie, I'm cool with however long it takes. I know it with be shipped when they come in.👍
Hi From the UK
Can’t wait till that 421 is together !!!! I’m going solid roller in mine with afr 227cc eliminator cnc heads
Another great video