How to Drill a Hole in Stainless STEEL and other TOUGH materials

Поділитися
Вставка
  • Опубліковано 3 лип 2019
  • Leah demonstrates how to select and use the proper drill bit for the right job. Leah also demonstrates how to drill thru several difficult and challenging building materials such as, stainless steel, brass, copper, hardwood, aluminum, steel plate, plastic and cinder block. Cobalt, HSS, Titanium, Black Oxide and Masonry bits are showcased in this video.
    Drill Doctor
    www.amazon.com/stores/node/25...
    If you like our vids, treat Leah to a cup of coffee!
    www.Ko-fi.com/seejanedrill
    Click on this link to shop on Amazon via See Jane Drill: www.amazon.com/?tag=sejadr-20
    Note: If you purchase any items through See Jane Drill's Amazon links, we will receive a small commission.
    If you really like the work we that we do or have been helped by our videos, consider supporting See Jane Drill on Patreon: / seejanedrill
    Contact Info:
    Website: www.seejanedrill.com
    Facebook: / seejanedrill
    Twitter: / seejanedrill
    Email: leah@seejanedrill.com
    Disclaimer:
    Due to factors beyond the control of See Jane Drill, we cannot guarantee against improper use or unauthorized modifications of this information. See Jane Drill assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. See Jane Drill recommends safe practices when working with tools seen or implied in this video. Due to factors beyond the control of See Jane Drill, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not See Jane Drill.
    #seejanedrill
  • Навчання та стиль

КОМЕНТАРІ • 157

  • @tyrantworm
    @tyrantworm 5 років тому +11

    We are legit seeing Jane (Leah) drill in this video

  • @Smurphenstein
    @Smurphenstein 5 років тому +7

    I am trying to get my mother and sister to watch and subscribe to your channel. It's great for people who know a bit but also novices.

  • @pulseweld
    @pulseweld 5 років тому +33

    as a SST pipe and tube welder working for years welding radiators and other high tolerance parts
    I can say with confidence that heat is your enemy, spray the bit with coolant to keep it as cool as you can,
    and go slow, too many RPMs can build up un necessary heat

    • @AndreaStevens2012
      @AndreaStevens2012 Рік тому

      What coolant do you recommend? Should it be oil or water or something else?

  • @CrankyPantss
    @CrankyPantss 5 років тому +6

    Thanks for that "bit" of information, Leah. Your videos are always so helpful. And very much appreciated.

  • @acurafillfilip9868
    @acurafillfilip9868 5 років тому +50

    Just a little tip: when drilling in plastics, especially the harder types like plexiglass, use blunt drills. Sounds weird but I learned this from professional display fabricators: sharp drills will make plexi etc. splinter around the edges of the hole.

    • @seejanedrill
      @seejanedrill  5 років тому +7

      Thanks f or sharing this

    • @jaidenlegacy1682
      @jaidenlegacy1682 5 років тому +1

      I typically use a neutral rake for thin materials

    • @tommythebiker3081
      @tommythebiker3081 5 років тому +6

      Adding a couple of layers of masking tape helps avoiding cracks and splinters too.

    • @karllaun2427
      @karllaun2427 5 років тому +2

      I agree with this. Not only can you get splintering, but the bit can grab and try to suddenly screw itself into the material. I have a separate set of bits for plastic and brass that have been stoned off to make them cut less aggressively.

  • @DigitalHypMedia
    @DigitalHypMedia 5 років тому +17

    You are just wonderful!!!! So glad I stumbled across your videos.

  • @PilotPlater
    @PilotPlater 5 років тому +1

    Thanks for this Leah, I've always struggled with drilling into steel.

  • @Ron_A._Bolton
    @Ron_A._Bolton 5 років тому +3

    I love my Drill Dr. Been using it for years. Hard to get in Australia, but I still got one :)

  • @edrock26
    @edrock26 5 років тому +1

    Another excellent and highly informative video! Thank you!

  • @briankrishna1736
    @briankrishna1736 4 роки тому

    I’m learning a lot from you ! You explain it in a way that I get it. Thank you!

  • @mmbengs
    @mmbengs 3 роки тому

    Thanks Leah for the helpful video!

  • @800SilverStar
    @800SilverStar 5 років тому

    Great videos, thank you Leah, for your clear explanation.

  • @FrazierMtnCheese
    @FrazierMtnCheese 5 років тому

    Just love your videos, I keep learning.

  • @AndreaStevens2012
    @AndreaStevens2012 Рік тому

    Another EXTREMELY helpful video! Thanks for posting!

  • @genericinfo
    @genericinfo 4 роки тому

    All day See Jane drill day! loaded all the videos i want to learn about. Thanks Jane! (Leah)

  • @heatherrichart-bishop5412
    @heatherrichart-bishop5412 2 роки тому

    I can feel how nice of a person you are coming through the screen! Thanks for the helpful video.

  • @Salish_Redbone
    @Salish_Redbone 5 років тому

    Well done info! Love your channel!

  • @MichaelR58
    @MichaelR58 5 років тому

    Leah, thanks for sharing, great information 👍

  • @andyk295
    @andyk295 3 роки тому

    Thank you !! Very informative !!

  • @sleepinglioness5754
    @sleepinglioness5754 5 років тому

    Thanks for the Drill Doctor tip.

  • @patrickenright6094
    @patrickenright6094 3 роки тому

    Thank you, very informative.

  • @clintprice2123
    @clintprice2123 5 років тому +1

    The Drill Doctor is a great shop accessory. Nothing is more frustrating than needing to have to run out and buy new bits in the middle of a project.

  • @georgewolf7063
    @georgewolf7063 3 роки тому

    At first glance I was afraid your videos might be a bit too basic for me, but I'm finding your info quite helpful! Especially this one! Drilling or cutting stainless is always a pain! x.x

  • @monicaoconnell4789
    @monicaoconnell4789 3 роки тому

    Thank you for explaining!

  • @TheQuiQuestion
    @TheQuiQuestion 3 роки тому

    That was really good info, thanks.

  • @TEAMPEREZPR
    @TEAMPEREZPR 5 років тому

    Thanks for the info. Excellent video!!! Gracias

  • @magic.marmot
    @magic.marmot 3 роки тому

    Love this. Beautiful. Thank you.

  • @dansanger5340
    @dansanger5340 18 годин тому

    I needed to make a lot of holes in stainless steel, so bought two cobalt drill bits. The first drill bit I destroyed within a couple holes by doing almost everything wrong which caused it to get too hot and lose its sharpness. After some research, I dropped the RPMs on the drill press down to its lowest setting, adjusted the pressure of the drill bit on the material up, so it cut into the metal, but also made sure I didn't drill for more than a couple seconds at a time so heat didn't build up. Probably most important, I ditched the oil and instead sprayed water on the drill bit every few seconds to keep it cool. After that, not problem with heat build up and dulling bit.

  • @MaxJackson1975
    @MaxJackson1975 2 роки тому

    Nice video. Especially at the end!

  • @rbrown3164
    @rbrown3164 Рік тому

    Great information, Thank you…

  • @dawnbaker9274
    @dawnbaker9274 5 років тому

    Lots of info. Thanks. 👍💖

  • @cl5935
    @cl5935 5 років тому

    You ROCK, Leah! Thanks for your simple, informative videos. They're helping me gain the confidence I need to tackle some of my own home improvement jobs. :-)

  • @ginosmovies
    @ginosmovies 5 років тому

    Good morning Jane! Happy 4th of July! love your videos.

  • @number6204
    @number6204 5 років тому

    Great video!

  • @jaidenlegacy1682
    @jaidenlegacy1682 5 років тому +7

    Most HSS drills will drill through softer steels such as 4140 or 1015 and even tougher toolsteels like A2. It's all about feeds and speeds.

  • @ianurbina9777
    @ianurbina9777 5 років тому

    I love u Jane, your an inspirational grandma, cheers from Nicaragua

    • @seejanedrill
      @seejanedrill  5 років тому +1

      Thank you. My son still needs to graduate from grade school before being a grandmother is in my future.

    • @ianurbina9777
      @ianurbina9777 5 років тому +1

      @@seejanedrill I don't really know your age, but just consider what I said as your approach to your viewers is as warm and encouraging as my lovely grandma's

  • @DIYNate
    @DIYNate 3 роки тому

    Enjoyed the video, Leah! Thanks for sharing - thinking about drilling through some stainless steel pipe for a fun little creative project. Appreciate your content! - DIYNate

  • @judyrobertson9479
    @judyrobertson9479 5 років тому

    Thanks, my husband is trying to install a flag holder for the house. Good video.

  • @miguelsalami
    @miguelsalami 4 роки тому +1

    👍GREAT INFO THANKS👍

  • @thomastommy1192
    @thomastommy1192 5 років тому

    Awesome cool video thanks for sharing. I truly hope you have a Blessed Summer.

  • @rachelhilton685
    @rachelhilton685 3 роки тому

    I love your videos, Leah. You're the best! I did my whole baseboards after watching your video. You gave me the courage to even do my whole kitchen and bathroom tile.

  • @basschica
    @basschica 5 років тому

    Great info as always. I'm finally doing my plaster project and watched your videos several times. I finished the scratch and double back coats yesterday. Not sure if the account I tagged on Instagram is really you, but if it is, you can see the progress so far! Thanks for your great tutorials!

  • @jrmlocks
    @jrmlocks 5 років тому +1

    Thanks Leah. I enjoy most of your videos. This one is no exception. But, please, sharpen your center punch.

  • @hemingwayarts
    @hemingwayarts Рік тому

    Thank You, I wondered why my metal bits weren't punching through stainless steel.

  • @mino7631
    @mino7631 2 роки тому

    Thank you

  • @zowie8888able
    @zowie8888able 5 років тому

    Hi, Leah. I wanted to thank you the baseboard forget video. You've disabled comments there so I've gone here to say it's very helpful. Thank you!
    I've subscribed and I see you have other useful videos too. This Aussie is very grateful.

    • @seejanedrill
      @seejanedrill  4 роки тому

      Thank you and welcome to the community!

  • @newton9837
    @newton9837 5 років тому

    I drill all those things for my work, and stainless is by far the worst to drill through. Great vid!

  • @MikeHonchoInPlaygril
    @MikeHonchoInPlaygril 5 років тому

    best channel

  • @janetelizabethburrows1354
    @janetelizabethburrows1354 4 роки тому

    Awe Leah!!!!!! Never mind drilling steel or Cinder Block. I’m talking as a Lancashire Lass across the pond. You really earn your metal, trying to drill through Accrington Brick. Trust me, when I say, “ You ain’t seen anything, to drill through, like Accrington Brick”. Trust me. If you can get your hands on a brick??? You WILL BE Amazed. 😜😇🤔🤔🤔💖❤️🙏👋

  • @johnnicatra570
    @johnnicatra570 5 років тому +3

    Thanks Leah.I be got to get me that drill Dr.I throw out a ton of bits over the years Happy 4th of July as this video was posted on the 4th.Look forward to your blogs all the time.

  • @mikebolt9753
    @mikebolt9753 5 років тому

    nice video leah

  • @okayokay2010
    @okayokay2010 3 роки тому

    Thanks

  • @PBS-nm1uu
    @PBS-nm1uu 3 роки тому

    love all your videos been watching you for years, fyi look at HAAS automation , title : basics of drill selection great info.

  • @VC-Toronto
    @VC-Toronto 4 роки тому

    I had to put a hole in a stainless sink to install a soap dispenser. I smoked a few bits, and ended up getting the hole started by using a concrete nail sharpened to a point and a hammer (with some wood behind it) to first pierce the metal. Once that was done, I used a step drill to get to the right size hole for the slug cutter to work. (I love using stainless, but hate drilling it)

  • @blister125
    @blister125 4 роки тому

    Hey Leah, I want to switch out the stock chrome handle bars on my bike with new ones, but I need to cut/drill some holes in the new ones for an internal throttle. Would the cobalt bit in my 18v cordless drill do the job for the small holes. I was also going to use an angle grinder with a metal cutting disc to make the holes bigger.

  • @EgadsNo
    @EgadsNo 5 років тому

    Ceramic tile is actually a perfect example of something you don't want to use the hammer setting with a masonry bit. You'll want to use patience and a light touch though and you can get that done too. Back when it was actually hard to find ceramic drilling bits/cutters that was the only option I had and it's worked many a time.

  • @MohsinExperiments
    @MohsinExperiments Рік тому

    Now I know why I was unable to drill through hard metal. Because I was using HSS bits instead of a Cobalt bit.

  • @georgebartholemew8444
    @georgebartholemew8444 4 роки тому

    I was told that if you use water, just in a spray bottle or like container, to lubricate your bit while drilling through stainless steel it work much better than oil. It keeps the bit cooler and allows for more bite, so you can use a regular HSS bit to drill stainless steel.

  • @herberthalvarez4737
    @herberthalvarez4737 4 роки тому

    wow i need a drill doctor

  • @lcook0825
    @lcook0825 5 років тому

    Wishing you a Happy 4th of July.

  • @russmartin4189
    @russmartin4189 4 роки тому +2

    When you drill stainless, lubricate the bit with water, not oil. Your bit will stay sharp longer.

  • @TheKellisunshyne
    @TheKellisunshyne 3 роки тому

    What about hardened steel Leah?
    What type of bit would you recomend?

  • @chrislane9363
    @chrislane9363 2 роки тому +1

    I love the information in this video. Thanks so much. I have 3/8" solid SS304 that I'm having a hell of a time drilling through. I bought an M42 cobalt set off Amazon, with my makita hand drill on low speel using cutting oil and a 3/16 bit, I made it half way through and it would drill any more. I used up one size and down one size from the set and made zero progress, using plenty of lube and slow speed. I have yet to make one hole successfully through this material and I have many to make! Feeling defeated. I've tried water as cooling fluid to no avail. Tried some hss bits and no success at all. I do notice a bit of a wobble on my drill, almost like the end if the drill the holds the but has a tiny wow or bend in it. Fairly new drill so I don't know how this happened. Could have a negative effect for sure. I simply want to drill 3/16" holes, beveled/ countersunk to accommodate a #12 stainless beveled 1" wood screw into teak. Please, please tell me what I need to achieve this and to do it many, many times over. I have very little garage space but could accommodate a drill press on my work bench if required. These are the bits I purchsed and tried: Metric M42 8% Cobalt Twist Drill Bits Set for Stainless Steel and Hard Metal (1mm-10mm/19pcs) www.amazon.ca/dp/B07MZQMPMC/ref=cm_sw_r_apan_i_0XP1SVWHY5AFBFR2AJ0D

  • @closertothetruth9209
    @closertothetruth9209 5 років тому

    458k subs sure has grown

  • @nr3rful
    @nr3rful 5 років тому +1

    "Now here's the thing".....hahaha 😃😃😃

  • @leecoleman822
    @leecoleman822 5 років тому

    Happy 5th of July . saleh 🔴

  • @f.k.burnham8491
    @f.k.burnham8491 5 років тому

    Good video, Leah, but how about one on drilling glass? I have needed to drill glass for my Ham Radio insulators

    • @seejanedrill
      @seejanedrill  5 років тому +1

      Ive already made a video on that

  • @lynnk8887
    @lynnk8887 10 місяців тому

    I know this is an oId post, but I'll give this a try anyway. I have a 36" stainless steel piano hinge that I want to use on a lid for a box I built. The hinge has no pre-drilled holes. The leaves are 1/16" thick. Should I drill recessed holes in this or just recess the entire hinge into the wood and not worry about recessed screw holes?

  • @democracy2005
    @democracy2005 4 роки тому

    hi, may i ask a question what kind of drill bit should i use in aluminium? thanks

  • @michellelewis42
    @michellelewis42 4 роки тому

    I need to know how to drill thru marbel I need to put my grandma's vase back in her head stone and to do that I need to drill it was glued when it was bought and has since then came off

  • @Damaged262
    @Damaged262 5 років тому +5

    It's the 4th of July, just use explosives! That's the wrong answer, isn't it..... Happy 4th all! Be safe and have fun!

    • @colehara
      @colehara 5 років тому +1

      Happy 4th of July from Canada.

    • @Damaged262
      @Damaged262 5 років тому +1

      @@colehara And I hope you enjoyed the 2nd, go ahead and get drunk again, we're good neighbors :-)

  • @richardordonez8331
    @richardordonez8331 4 роки тому

    Yup. You need a drill doctor. I've restored lots of drill bits when they broke off in the piece. No need to look for another drill bit.

  • @moonovermiami9787
    @moonovermiami9787 5 років тому

    Thank You!!!! Very timely for me... need some posts on my concrete pool deck...
    🇺🇸 Happy Independence Day! 🇺🇸

  • @vernadkins1673
    @vernadkins1673 5 років тому +9

    Volume level real low

    • @seejanedrill
      @seejanedrill  5 років тому +1

      Not experiencing that on this end

    • @YouTube_stole_my_handle
      @YouTube_stole_my_handle 5 років тому +2

      0:33 was a shock! Lol

    • @thesquarerootofnegativei6225
      @thesquarerootofnegativei6225 5 років тому +2

      @@seejanedrill I experienced large variations in volume. To the point where I'd adjust the volume so I could hear you speak and then I'd get blasted at the edit. Then, I'd fix that, and couldn't hear you after the next one. I don't remember it being like that in the past.

  • @plinkbottle
    @plinkbottle 5 років тому

    Sharp matters and the angle matters too, if you are going thru soft metal and don't want to dig in or chatter.

  • @chrisg2163
    @chrisg2163 3 роки тому

    I'm looking to drill a hole into alliminium hollow pole ???? What do I use? just a small hole to put wire through ... the pole is 10mm radius

  • @DeeegerD
    @DeeegerD 5 років тому

    I've read (not tried) that a good way to drill through hardened steel is with a masonry bit. Sounds odd but apparently works.

  • @qg786
    @qg786 2 роки тому

    It's no wonder my drill bits don't last that long, I should have been using Cobalt steel drill bits for drilling steel. 👍

  • @jangalexisruiz7491
    @jangalexisruiz7491 5 років тому

    Which is best for drilling a hole into a bed frame? dont know if its steel or iron or what but its very dense.

    • @seejanedrill
      @seejanedrill  5 років тому

      Cobalt will go more quickly than hss

  • @franplesic942
    @franplesic942 5 років тому

    Does it just look like or the drill @6:15 is sharpened wrong? only one side cuts in this case

  • @Here_Today_
    @Here_Today_ 5 років тому

    Besides the masonry bit tip, is there a way to tell the different bits apart once they're out of the wrapper?

    • @seejanedrill
      @seejanedrill  5 років тому

      The color is the give away

    • @hopefilledsinner3911
      @hopefilledsinner3911 5 років тому

      Black with a raised edge equals crappy, black straight is ok, yellow better, shiny silver maybe even better. Brown tinge is colbolt, best. Drill and see.

  • @dazie1245
    @dazie1245 5 років тому

    Oh Ya thank you

  • @womblestacker7993
    @womblestacker7993 2 роки тому

    👍👍👍👍

  • @pmcg97
    @pmcg97 5 років тому

    Hi Leah , have you any design ideas on how to construct a DIY apple press to make cider ? 🧐

    • @seejanedrill
      @seejanedrill  5 років тому +1

      😊i wish I did. Unfortunately, l know nothing about apple presses. Good luck with your project.

    • @pmcg97
      @pmcg97 5 років тому

      Ok Leah

  • @PinetopJackson
    @PinetopJackson 5 років тому

    Years ago we stayed with my in-laws in Arizona for a year, and all the houses in their neighborhood had cinder block walls instead of fences. My wife wanted to hang some metal wall art outside, and she tried to use my cordless drill on the wall. Lol, it didn't work! We didn't have the means to buy a new hammer drill at the time, so we just left the wall bare

    • @seejanedrill
      @seejanedrill  5 років тому

      Hey Kris

    • @hopefilledsinner3911
      @hopefilledsinner3911 5 років тому

      If you use a masonary bit rotate it with your fingers and continually rap rap rap it with a hammer, eventually you will have a hole. Miners layed charges in holes drilled this way in the good old days. Two men, heavy hammer.

  • @BBQPitmaster626
    @BBQPitmaster626 5 років тому

    What about plastic? Is the black oxide bits good to drill through plastic? And what about bi-metal hole saw bits? Can I use these to drill a hole through plastic?

    • @hopefilledsinner3911
      @hopefilledsinner3911 5 років тому +1

      Yes to both questions. But if drilling through acrylic/perspex use a blunt bit.

    • @patzeuner3362
      @patzeuner3362 5 років тому +3

      Drill with a blunt or you can drill reverse to get it started, if going through thick, thin I usually just drill reverse, drills and heats the edge so it doesn't crack or splinter

  • @bigkidforever6388
    @bigkidforever6388 4 роки тому

    I have been confused. I was using masonry bits to go through steel. The steel I was going through was from the 1940s. The titanium bits broke even when I was using a lubricant.

  • @drumbum7999
    @drumbum7999 3 роки тому

    Just FYI it sounds like your mic is pointed away from you and is picking up the echo of your voice off said wall. Thanks for the video!

  • @salehkhamis5329
    @salehkhamis5329 4 роки тому

    Once when I tried to drill through a tough wood I smelled smug . and I couldn't get through this kind of wood. Would you tell me what mistake did I do?
    And what is the best way to make holes through very tough wood?

    • @seejanedrill
      @seejanedrill  4 роки тому

      A sharp drill bit works wonders. Do you sharpen ypur drill bits?

  • @hopefilledsinner3911
    @hopefilledsinner3911 5 років тому

    Colbolt drill bits will outperform almost any others. 1 colbolt drill bit will (provided you dont cook it) preform better than 10 regular HSS bits in hard materials like stainless. What I'd like to know is what you reach for if these wont do the trick? Im aware of diamond tube drills. But any information?

    • @stuartlockwood9645
      @stuartlockwood9645 5 років тому

      Hi hopefully Sinner, if you have a bench grinder and can sharpen a drill freehand, try regrinding the bit to a flatter angle, drill slow and with cutting fluid, I have good results in most tough steels using this method ,otherwise you have to invest in some carbide drills ,not cheap, but will cut most hard metals. Hope this helps.

    • @hopefilledsinner3911
      @hopefilledsinner3911 5 років тому

      @@stuartlockwood9645 definitely food for thought. Thankyou.

  • @colebarnes3823
    @colebarnes3823 Рік тому

    Any1 got tips on how I can drill a half inch straight line that is ab 1/8 inch wide. On a steel golf putter head.

    • @colebarnes3823
      @colebarnes3823 Рік тому

      Could I jus use a center punch type of tool. It doesnt have to be deep into the putter only probably another 1/8 inch

  • @AlejandroMeri
    @AlejandroMeri 3 роки тому +1

    I just bought my first drill at 31 years old (I know, kinda old, grew up without a dad and mom was an office lady) and I couldn't have imagined how many types of drill bits there are, I always thought there were just 3 types! (metal, wood, and cinder block)
    I had to make some holes on a stainless steel pipe so I bought a bit for "metal"... time to drill the hole and I hadn't even heard of lubricant yet... let's just say the drill bit did NOT survive...

  • @michaeljohnson2371
    @michaeljohnson2371 5 років тому

    What is a carbide tip? What’s it do?

    • @dwightl5863
      @dwightl5863 5 років тому +1

      Carbide is a very hard but brittle material and also a bit pricey. A carbide tipped drill will stay sharp a long time but if the entire entire drill was carbide it would break easily--thus just the tip is carbide.

  • @donaharrisburg5469
    @donaharrisburg5469 5 років тому

    😁

  • @pulsey2001
    @pulsey2001 5 років тому +2

    My brother is being a pain, what drill bit do I need for his brain surgery?

  • @tushardholakia6076
    @tushardholakia6076 Рік тому

    topic "How to Drill a Hole in Stainless STEEL" is not served in exact details and video with drilling ss pipes and thick sheets , and drill bit details and it RPM and hand drill uses to drill in ss , can u pl elaborate in video and post a link , thank

  • @goodun6081
    @goodun6081 5 років тому

    A spring-loaded prick- punch that doesn't require a hammer makes your work faster and easier. Just push down on it by hand 'til it clicks!
    Hey, it's the 4th of July --- some might argue that it's as good a day as any to punch a prick! Except that violence rarely, if ever, solves anything. And as they say, discretion is the better part of valor. And even when drilling a hole in something, using too much force just ends up burning out the bit prematurely. Finesse and technique, a lighter touch plus constant pressure, works much better.

  • @wordsofhis1799
    @wordsofhis1799 5 років тому

    Ever hear of using mustard as a drill lubricant on stainless?

    • @seejanedrill
      @seejanedrill  5 років тому +1

      Seriously ?

    • @wordsofhis1799
      @wordsofhis1799 5 років тому

      @@seejanedrill Yes! We were installing half-door kickplates and had to drill a hole for the door's pull handles. So instead of getting us cobalt drills they supplied mustard (cheaper) ! It did work better than cutting oil, though not very well.

  • @CHEVYCAMARO4GEN
    @CHEVYCAMARO4GEN 4 роки тому

    No wonder I destroyed all my drill bits on SS, now I know... Cobalt

  • @dianamoody7251
    @dianamoody7251 5 років тому

    She is one smart lady.