[HOW TO] Upgrade 2019-2022 Silverado LTD Custom headlights with Lasfit LED's (Plug N Play)

Поділитися
Вставка
  • Опубліковано 25 сер 2024
  • These Lasfit LED's are a great improvement over stock halogen bulbs. For reference the truck shown in this video is a 2022 Silverado LTD Custom. Should be a similar process on all 2019-2022 Silverado LTD's. 2022.5 refresh models may have different requirements.
    Low Beams (H11) - amzn.to/3fTsz2V
    High Beams (9005) - amzn.to/3Vaxk8g
    =========================================================
    Visit the Lasfit Website: lddy.no/snv9
    Get yours here: lddy.no/1cy04
    =========================================================
    Install a Gen5DIY Relocation harness: • [HOW TO] Install Gen5D...
    =========================================================
    Check out my Amazon Store Front!
    www.amazon.com...
    Other stuff I like to use:
    Get Amazon Prime: amzn.to/2RdYigg
    Work Gloves: amzn.to/37jel2a
    Disposable Gloves: amzn.to/3ix19xT
    Milwaukee Impact Wrench: amzn.to/2RgJJJ5
    Makita 12v Impact and Drill Set: amzn.to/2TW5gIP
    Makita 18v Impact and Drill Set: amzn.to/30GVyLy
    Makita 18v Impact Brushless: amzn.to/3DcmG8D
    Makita Drill Bits set: amzn.to/37ie538
    Go Rhino! Digital Pressure Inflator: amzn.to/2G8x6t8
    Dewalt Socket Set: amzn.to/2GdmUzq
    Craftsman Torque Wrench: amzn.to/30GZzQd
    eTORK inch/lb Torque Wrench: amzn.to/3NiUwxh
    Trim Removal Tools: amzn.to/37gjRSR
    Oil Drain Pan: amzn.to/2vbQZ08
    Oil Pump: amzn.to/36fxyAf
    Fluid Transfer Pump: amzn.to/37LUcH5
    Shop Towels: amzn.to/2NLimok
    Chemical Guys Inner Clean: amzn.to/3azFvDE
    --As an Amazon Associate I earn from qualifying purchases.

КОМЕНТАРІ • 63

  • @fondupot
    @fondupot  Рік тому +1

    Get yours here:
    Low Beams (H11) - amzn.to/3fTsz2V
    High Beams (9005) - amzn.to/3Vaxk8g

    • @JoseMartinez-gw9fo
      @JoseMartinez-gw9fo Рік тому +1

      They told me that the 9005 wouldn’t fit had to be at h11 for the high beam

    • @fondupot
      @fondupot  Рік тому +1

      Well my video proves that incorrect.

  • @jinxinator30
    @jinxinator30 Рік тому +5

    Thank you for showing the position on the led bulb for High beam.

    • @fondupot
      @fondupot  Рік тому

      You bet! Thanks for watching.

  • @randallboyle9710
    @randallboyle9710 8 місяців тому +1

    I don't small hands and I got both high and low beam swapped from the top with out removing fenders

    • @fondupot
      @fondupot  8 місяців тому

      Glad to hear it!

  • @thepainter6486
    @thepainter6486 День тому +1

    I tore my hand up trying to get that damn bulb back into the driver side headlight. Could never get it seat in olace and lock. Had 3 guys try and not one could get the light in. I had to put the halogen back in due to led not working and its not in properly. I dont know how in the hell you got that in.

    • @fondupot
      @fondupot  День тому

      @@thepainter6486 I remember it being a royal Pain in the butt. Sorry you’re having troubles.

  • @fullsend6921
    @fullsend6921 Місяць тому

    Have the same bulbs. Tried for an hour and couldn't get a low or high beam to twist into place. Heat sink is so big it is impossible to twist the low beams in for me...

    • @fondupot
      @fondupot  Місяць тому

      Sorry to hear that. It’s def a tough space to get your hands into.

  • @DavidDominguez-eh5bo
    @DavidDominguez-eh5bo Рік тому +1

    Great work

  • @jamiekilbury7346
    @jamiekilbury7346 11 місяців тому +1

    Im going to try these ones...i tried couple other led bulbs and they all suck and cant see anything at night like their not even on...i up graded my 22 custom with fog lights cause they dont come factory that upgrade makes a a huge difference with seeing on the side of the truck better...if you really wanna see then add the ditch hood lights and or a light bar

    • @fondupot
      @fondupot  11 місяців тому +1

      They’ve been great. Even for a reflector housing these bulbs are miles better than stock.

    • @jamiekilbury7346
      @jamiekilbury7346 11 місяців тому

      Would you recommend getting High beams also if the low beams are bright enough...I already have a 20" light bar in front on my brush guard and a 42" light bar on my roll bar in the bed of my truck lol

    • @fondupot
      @fondupot  11 місяців тому

      Yea I would. They help too. I use them frequently. What fog lights did you go with? I’ve been thinking about adding them to my Custom.

    • @jamiekilbury7346
      @jamiekilbury7346 11 місяців тому

      I had the dealership Install the factory setup that came with the the fog light buckets,wire harness and the new dash switch also came with bulbs...but I switched them out with led bulbs...cost around 700 with install but it's covered under warranty

    • @jamiekilbury7346
      @jamiekilbury7346 11 місяців тому

      Wow,wtf their 150-170 dollars for the low beam only that's crazy...

  • @AKAInfntyX2
    @AKAInfntyX2 Рік тому +1

    Thanks for the video. How are they still doing? I have the same headlights and tried the Lasfits that are fanless. They are smaller and not as bright in wattage/lumens as yours. I’m running them with the OEM dust caps. Time will tell if there are any overheating issues. For now, they are fine.

    • @fondupot
      @fondupot  Рік тому +1

      They're doing great. No issues so far.

  • @bronsonstephens5799
    @bronsonstephens5799 Рік тому

    The brights in your description say they don’t fit my vehicle (according to Amazon) and those low beams are EXPENSIVE! I’m definitely not gonna pay $180 for low beams 😂

    • @fondupot
      @fondupot  Рік тому

      Amazon isn’t always correct. And yea they’re expensive. But they are really great.

  • @Johnlee1225
    @Johnlee1225 7 місяців тому

    Can you please share link for the wiring harness. Thank you

    • @fondupot
      @fondupot  7 місяців тому

      What harness are you referring to?

  • @toddhorton2484
    @toddhorton2484 Рік тому

    Do you notice the fan noise? On the fence trying to figure out the best LEDS for my 2023 custom as the factory halogens are horrible

    • @fondupot
      @fondupot  Рік тому +1

      Only when the truck is off and the lights are on. Otherwise you don’t hear it at all ever.

  • @TheCarCrazyGuy
    @TheCarCrazyGuy Рік тому +1

    Hey brother, I need your help. I got a set of these bulbs to review from Lasfit. I decided to work on the easy side first (passenger). The bulb just doesn’t fit into the headlight housing. The actual snout of the bulb is 19.1 mm and the factory bulb is about 16 mm. I made sure to use the correct bulb for the passenger side as they’re side specific. The three tabs that are supposed to protrude through the openings on the housings are flush and will not go through enough to turn and lock into place. And that’s with the orange O-ring removed for testing. I contacted the manufacturer and they sent me another set but they’re exactly the same. This is being installed on a friends 2022 Silverado Custom non refreshed. Unfortunately, when we put the truck back together my friend dropped the halogen bulb inside the housing and it fell to the bottom. Had to buy another halogen bulb, ooof. I don’t know what to do. Any ideas? My personal truck has factory LED’s thank God.

    • @fondupot
      @fondupot  Рік тому

      I remember it being a HUGE pain in the ass to get them to fit. I know this is a lot of extra work. But you can try to remove the headlight housings from the front end. And then installing the bulbs with them off the truck. Then reinstall the headlight. I think I show part of that process in my Gen5DIY DRL harness install video for this truck. Hopefully that helps. Good luck!

    • @TheCarCrazyGuy
      @TheCarCrazyGuy Рік тому

      @@fondupot how do you get the headlight assemblies out?

    • @fondupot
      @fondupot  Рік тому +1

      Involves removing the grille. I don’t have a full video on it. But I think I show some in another video. Referenced in my previous comment.

    • @TheCarCrazyGuy
      @TheCarCrazyGuy Рік тому +1

      @@fondupot yeah, I’m not gonna go that far. I do have some good news though. I was able to get both bulbs in. The trick is to use the original O-rings from the OEM bulb and put some silicone lubrication on the O-rings. That helped the bulb spin easy and it was super easy after that.

    • @fondupot
      @fondupot  Рік тому +1

      @@TheCarCrazyGuy right on, glad you got it to work. Good idea lubing up the o-rings.

  • @mobgma
    @mobgma 7 місяців тому

    lots of guys say they switched the DRV and PASS bulbs. did you do that?

    • @fondupot
      @fondupot  7 місяців тому

      Meaning they switched the driver side to the passenger side? The bulbs are identical. So I’m not sure what benefit this would be.

  • @IronDog28
    @IronDog28 Рік тому

    Would a regular h11 from lasfit work? The pros are quite a bit more expensive

    • @fondupot
      @fondupot  Рік тому

      Probably. But I don’t know for sure.

  • @dannyholland493
    @dannyholland493 5 місяців тому

    Seems when that fan inevitably burns out it could cause a fire.

    • @fondupot
      @fondupot  5 місяців тому

      Haven’t had an issue yet. I think there’s a failsafe that if the fan stops the bulb becomes inoperable.

    • @dannyholland493
      @dannyholland493 5 місяців тому

      @@fondupot - That would do the trick, then just replace the buld again.

    • @fondupot
      @fondupot  5 місяців тому

      @dannyholland493 correct. 👍🏻

  • @Chunkylover69705
    @Chunkylover69705 Рік тому

    Do you struggle with the back up camera flickering

    • @fondupot
      @fondupot  Рік тому

      Nope. Nothing like that.

  • @toddhorton2484
    @toddhorton2484 Рік тому

    I installed (4) pros on my 2023 custom today and it was not easy. I adjusted the collars and no matter what i did, i could not get them lined up top to bottom 😡
    They are bright for sure but its impossible to get them lined up top to bottom. Not sure what else to do. Wish you could lock them in, then loosen the set screw to get them top to bottom. 😡

    • @fondupot
      @fondupot  Рік тому +1

      Yea that’s my biggest issue with these. But they sure are better than stock.

    • @toddhorton2484
      @toddhorton2484 Рік тому

      @@fondupot insanely brighter. I did the complete pkg (4) Pro headlights, front turn signals, backup lights, license plate lights. They are insanely bright

    • @fondupot
      @fondupot  Рік тому

      @@toddhorton2484 Nice. I think I have the other bulbs, but haven't gotten around to doing them all yet.

  • @drigz206
    @drigz206 Рік тому

    Any issues with flickering or getting lights getting really dim?

    • @fondupot
      @fondupot  Рік тому

      Nope been great so far. I did install a gen5diy DRL relocation harness, so my headlights aren't on for the DRL anymore. When they are used in as a DRL this could cause excess use on the LEDs and could cause them to wear out faster than normal.

  • @joetingelhoff9847
    @joetingelhoff9847 Рік тому

    These lights would work on the 2022 Silverado custom correct?

    • @fondupot
      @fondupot  Рік тому

      Is it a 2022.5 refresh. Or a 2022 LTD?

    • @joetingelhoff9847
      @joetingelhoff9847 Рік тому

      Good question. The front looks exactly like yours. I believe that it’s not a LTD. But is there a way to find out exactly what it is? Because all it says is Chevy Silverado 2022 custom

    • @fondupot
      @fondupot  Рік тому

      My trucks owners manual says “Silverado LTD”. So if you’re had that as well. It’s probably the same as mine. Mines a 2022 LTD.

    • @fondupot
      @fondupot  Рік тому

      @@joetingelhoff9847 and if it was a 2022.5 refresh, the front end would look different.

    • @joetingelhoff9847
      @joetingelhoff9847 Рік тому

      My front grill look just like yours! I’m looking at my owners manual right now and it doesn’t say anything about LTD that’s why I am so confused right now!
      Sorry for asking so many questions I just don’t wanna spend 200+ bucks on led for them not to work