@@TheEDgun Thank you for the reply. The 350 mm barrel in 22 cal, would be what I would be inerested in, for the Leshiy. I have been hearing good things about the 40 gr slug. Ballistic Coefficients and Sectional Density would be the reason that I would want to shoot slugs. Thanks again for your good work. .. And I still smile every time I shoot the Leshiy. ..😊
@@willybee3056 If you have Leshiy in .25, 31gr H&N Grizzlys work very well. You just have to resize them down a little bit, as they're very inconsistent out of the box and that is the main reason why people find them inaccurate. They dont't need that much velocity with 1:16" twist rate. 230m/s is enough to stabilize them up to 200 meters and that's what you get with 350mm .25cal barrel with regulator set to 130bar.
@@jnuvolaipsc Thank you for the reply. I do have the 350mm barrel in 25cal. I will have to give that a try. Thanks. But so far most all my shooting is at 10m in my basement. I am getting the feeling that the 22 cal, 40 gr bullets will have a higher sectional density, and a better ballistic Coefficient. And it would seem to me that they would work better at longer ranges. But, yes,, sofar, at 10 meters, I can't get better than one hole groups. And I am doing that with the Crosman 14.3 gr.
Станция неудобная. Сброс давления удобнее гуженом или специальным клапаном, который имитировать выстрел может. Но это так.... А себе на R3m я давно на принтере такую штуку респечатал)))
@@TheEDgun Длинна,да;материал,да,но типоразмер то на редукторах одинаковый(3,4,5 или как кой там я не знаю)да и тебе то какая разница,делай под свой ключ,а люди сами подберут под него ключик
такая проблема леля 2.0 полежала в машине при температуре +2 около часов 5. После чего решил проверить давление нажав так сказать на (диафрагму которая шприцом выдувается при замене батарейки) диафрагма просто сломалась на пополам, я а....ел. Возможно ее новую заказать?
Thank you for always listening to your customers requests and making your products better!
I just like to move forward, even by small steps!
Good job Ed. I like it. You’ve improved your regulator with making a more low profile unit and user friendliness of it now. Thank you.
Yes, they are working perfectly now.
Transparency, integrity, product improvement over pr. Bravo.
Ed, I never planed on adjusting my regulator, but it is good to know I can if I want to. Thanks for sharing!
Excellent improvements Ed ✔️👍
Возникла потребность, сделал - молодец.
I always like your videos.
Thank you for sharing. ..
:-) Thanks for attention!
Do you have plans to make barrels to shoot slugs?
Thanks and keep up the good work.
I do, but I don't know when it will happen.
@@TheEDgun
Thank you for the reply.
The 350 mm barrel in 22 cal, would be what I would be inerested in, for the Leshiy.
I have been hearing good things about the 40 gr slug.
Ballistic Coefficients and Sectional Density would be the reason that I would want to shoot slugs.
Thanks again for your good work. .. And I still smile every time I shoot the Leshiy. ..😊
@@willybee3056 If you have Leshiy in .25, 31gr H&N Grizzlys work very well. You just have to resize them down a little bit, as they're very inconsistent out of the box and that is the main reason why people find them inaccurate. They dont't need that much velocity with 1:16" twist rate. 230m/s is enough to stabilize them up to 200 meters and that's what you get with 350mm .25cal barrel with regulator set to 130bar.
@@jnuvolaipsc
Thank you for the reply.
I do have the 350mm barrel in 25cal.
I will have to give that a try. Thanks.
But so far most all my shooting is at 10m in my basement.
I am getting the feeling that the 22 cal, 40 gr bullets will have a higher sectional density, and a better ballistic Coefficient.
And it would seem to me that they would work better at longer ranges.
But, yes,, sofar, at 10 meters, I can't get better than one hole groups. And I am doing that with the Crosman 14.3 gr.
@@jnuvolaipsc
What size of groups at 200 meters can be possible?
Thanks again. ..😆
Do all the new r5m matadors come with this sticker preinstalled now ?
Yes
@@TheEDgun thank you for the reply love you work. And I can truly say one of the best airguns on the market. Hello from Kuwait
Здорово придумано👍
90° 15бар, 180° 30бар. а так вообще как циферблат часов, 12делений. Вопрос в другом, есть ли прямая линейность!?
на рабочих давлениях да, есть линейность.
Станция неудобная. Сброс давления удобнее гуженом или специальным клапаном, который имитировать выстрел может. Но это так.... А себе на R3m я давно на принтере такую штуку респечатал)))
Производите ли вы редуктора под "чужие" модели винтовок?
Эд,в комплекте с наклейкой нужно делать флажок который бы одевался на шестигранник,для удобства
так шестигранники у всех разные, не угадаешь.
@@TheEDgun Длинна,да;материал,да,но типоразмер то на редукторах одинаковый(3,4,5 или как кой там я не знаю)да и тебе то какая разница,делай под свой ключ,а люди сами подберут под него ключик
Эдуард приветствую, хотелось бы поменять на леле редуктор на короткий (старый подтекает и объём меньше с ним), если это проблемма готов купить его.
пиши Татьяне segezha(at)edgun.ru
Если отмыть редуктор потребуется , наклейка не отвалится ?
наверное отвалиться, мне не очень нравится, как она держиться. Но её можно снять, а потом приклеить уже суперклеем, если мыть нужно будет.
Очень удобно сделали.
saveing up for EdGun. N. Wales UK
такая проблема леля 2.0 полежала в машине при температуре +2 около часов 5. После чего решил проверить давление нажав так сказать на (диафрагму которая шприцом выдувается при замене батарейки) диафрагма просто сломалась на пополам, я а....ел. Возможно ее новую заказать?
Да, без проблем, пиши в обрутную связь с www.edgun.ru
когда будет что то новое из винтовок желательно по лицензии! в калибрах 7-9?
никогда, я не собираюсь заморачиваться изготовлением лицензионных вещей в РФ.
Приветствую Эд,с ноября на р5м будут, а кто купил р5м в сентябре можно как нибудь наклейку преобрести
пиши Тане segezha(at)edgun.ru
На Р5М редуктор на какое давление настроен изначально?
130 бар
Спасибо.
Будет ли такая наклейка на редукторе р5м ?
с ноября 2018 такие наклейки идут на всех редукторах всех изделий.
Вот бы можно было не разбирая так делать!