the conslusion section of the videos should be about whether u like it or not, is it using good components, would u personally buy it. Not stating the features and specs again.
Thank you for the detailed teardown.. I bought one in Sept 2022 and it just stopped working. I am a bit disappointed as it was expensive >$100 and is clearly non serviceable.
Why oh why didn't they make this the same 140W spec to match the 737 Power Bank I don't know, especially since that power bank can also take 140W in, it would have been the perfect match.
I saw a picture in an ad showing a gan charger having electric boards assembled in a cube. I wanted to see if this is how they really assemble them. The ad did not lie. They make cubes out of these chargers. I expected a single board and a lot of empty space.
Thank you for the video but we would love to see real tests of the output watts. Some people on Amazon say it only delivers 88-89 watts only. It never reaches 120w. Is it true?
So is there a direct connection from a/c to the USB side or its it fully isolated? Or would I need a surge protector to protect the USB devices from surges and and spikes.
Not higher than 100W. Power Delivery added stupid 48V charging... for Li-Pol accumulators... with no protection... They should either refuse from it and move to 20V/12A, or no way I'm using it.
Hi was wondering have you done a teardown of Alogic GaN chargers, just interesting to find out who makes the GaN chips in them and also the other components used.
PSDA 3D 300W GaN 4-port charger. The company is small but check it out, it has 140w pd 3.1 and own OLED monitoring screen (for voltage and power output on every port)
This one can't, but you can check out these two hybrid chargers that are also from Anker: ua-cam.com/video/4nK2sFw_Ukg/v-deo.html ua-cam.com/video/0OyV6sh22zY/v-deo.html
@@ChargerLAB Well, they had VOOC-enabled chargers before, they only needed to use the correct charge controller ic, which is pin-compatible with one they used here. I once modified my baseus charger, that had sw3516, soldered sw3518 on its place and got VOOC support
@@remainsmemories626 just like most proprietary charging protocol. it's really hard to find their aftermarket counterparts. their phone does support PD but at meh power rate
Too bad Anker reputation is destroyed by the Eufy incidents. I will by from other brands in the future. And it's sad, cuz I liked their cables and chargers.. even the powerbanks.
the conslusion section of the videos should be about whether u like it or not, is it using good components, would u personally buy it. Not stating the features and specs again.
Agree
Agree
yes
Yes please!
You can derive that conclusion yourself I would presume. Components are well insolated and stated in the video latest technology are supported.
That's the review world needs! Thanks a lot.
This is soooo nice compared to boring default marketing-filled keynotes.
That extra hand at 8:06 spook me.
😂
No wayyy you added 4K!! Thank you so much, you are the best!!!
Got this charger last Jan 2023. Still using it today, so far no issues.
The anker event was superb.
Please hook up your chargers to a Spectrum analyzer to measure harmonic distortion of current.
Thank you for the detailed teardown.. I bought one in Sept 2022 and it just stopped working. I am a bit disappointed as it was expensive >$100 and is clearly non serviceable.
Why oh why didn't they make this the same 140W spec to match the 737 Power Bank I don't know, especially since that power bank can also take 140W in, it would have been the perfect match.
I saw a picture in an ad showing a gan charger having electric boards assembled in a cube. I wanted to see if this is how they really assemble them.
The ad did not lie. They make cubes out of these chargers. I expected a single board and a lot of empty space.
Awesome work! Way more detailed than I was expecting :) Instant sub!
Thanks for the sub!
Engineering focused reviews? Yes please.
Can u make teardown video of 70w spigen
arc station pro
I wonder if you could do Anker's new 737 battery that can input and output at 140W.
Thanks for the advice.
We'll consider that.
I wish you would elaborate on how strong the suction was.
Thank you for the video but we would love to see real tests of the output watts. Some people on Amazon say it only delivers 88-89 watts only. It never reaches 120w. Is it true?
Coming soon!
I'd be curious how this compares to SlimQ's chargers. From my research they seem to be a worthy competitor to Anker's new products
why pps only to 11V ?
Gracias por el vídeo. Es muy interesante ver los cargadores por dentro.
Nice demonstration 👍🏼👏🏼👏🏼
How about car and motor cycle USB power supplies? Test those???
Good idea.
5:30 For such high end or pricy charger, to use a cheap electrolytic capacitor?
They had to cut costs somewhere and decided to do so with that
Hello, can you do a teardown of those cheap "GaN" branded chargers?
No USB PD 12 V? PPS up to just 11 V? Sucks.
can you also test the heating of chargers while charching the devices? it would be great😊
Yeah. That's a great idea!
We will pick up some chargers to review it.
@@ChargerLAB thank you :)
So is there a direct connection from a/c to the USB side or its it fully isolated? Or would I need a surge protector to protect the USB devices from surges and and spikes.
mine is eu version output but doesn't has a suction pad, is it OK? or I should go to retailer and ask for it?
all phones and devices should suit the usb pd standart.
Not higher than 100W. Power Delivery added stupid 48V charging... for Li-Pol accumulators... with no protection... They should either refuse from it and move to 20V/12A, or no way I'm using it.
Hi was wondering have you done a teardown of Alogic GaN chargers, just interesting to find out who makes the GaN chips in them and also the other components used.
We haven't.
Nice Video"s, your are the best
I like your video! bur rather than an "analysis" this might be just a video telling the part used inside the charger.
What happen to you WORXs Dremel ???
Do you have any plan to review the solar power stations? like anker 757, bluetti ac 200, ecoflow delta pro?
We did it: ua-cam.com/video/MtQgOqrg4-E/v-deo.html
And planning to do more.
no testing on power efficiency, output, idle power, PFC?
This is the teardown video.
power efficiency, output, idle power belong to charging review video.
That pink silicon has to be a heat dissipator right?
For heat dissipation and fixing.
Does this range come in the UK power version?
Sure does!
Can you recommend us best all in one charger?
new anker chargers
PSDA 3D 300W GaN 4-port charger. The company is small but check it out, it has 140w pd 3.1 and own OLED monitoring screen (for voltage and power output on every port)
please teardown some mcdodo chargers please
We're planning.
REALLY usefull channel ❤
Surprised no Apple 2.4A
Great video
Does anyone know if this can be used as a power bank as well?
This one can't, but you can check out these two hybrid chargers that are also from Anker:
ua-cam.com/video/4nK2sFw_Ukg/v-deo.html
ua-cam.com/video/0OyV6sh22zY/v-deo.html
excellent
Always love your content. at 5:54 when you pronounce 140mΩ as one hundred forty microFarad, actually the correct one is one hundred forty milli Ohms.
My bad.
So it doesn't support VOOC?
No. VOOC is the OPPO's private protocol.
@@ChargerLAB Well, they had VOOC-enabled chargers before, they only needed to use the correct charge controller ic, which is pin-compatible with one they used here. I once modified my baseus charger, that had sw3516, soldered sw3518 on its place and got VOOC support
@@remainsmemories626 just like most proprietary charging protocol. it's really hard to find their aftermarket counterparts. their phone does support PD but at meh power rate
Goodbye repairability
Too bad Anker reputation is destroyed by the Eufy incidents.
I will by from other brands in the future. And it's sad, cuz I liked their cables and chargers.. even the powerbanks.