so i just bought the leopard frame and other parts to build one... did i just make a mistake lol, hopefully mine will preform better pretty sure i have better motors camera ect. but it makes me think.....
Hello I bought one of these furibees it has the kakute f4 v1 board non-aio. my fc shorted out from a crash so i ordered another one when I installed it, It began to spark off the positive connection that you solder to the fc when I pluged in the battery. I checked the soldering connections and everything was clean and not touching each other so I assumed the fc was bad. I recently received another one. hooked it all up plugged in the battery and it was fine however when i put it on beataflight and did a motor check this new board began to spark in the same place, What should I be checking or looking for?
for a 3 inch build, whats better? a 850mah 25-50c (nanotech, 10$), 850mah 45-90c (nanotech, 15$), or 650mah 70-140c (Chinahobbyline 14$). Im conflicted because i usually use cnhl batteries, so i want the 650, but the 850 will give longer flights
mine came unable to connect to betaflight, had to reinstall firmware which lost all stock settings and the LED strip has one led out. Bad quality control.
I'm looking to buy my first fpv drone. And I would appreciate some advice. My requirements/what I need. 1. I need to use the Drone with a GoPro camera attached following 600+hp sandrails in Pismo and Glamis sand dunes at high speeds. I've noticed some GoPro footage is plagued with interference. How is that remedied 2. The environment is Harsh, I need something robust and crash-tested. Dust sand and water resistant 3. I need something simple that can be worked on easily, and has a straightforward utilitarian design 4. I'm considering a pre-built design. Would you recommend building from scratch or buying a rtf fpv? 5. What ready to fly or nearly Ready To Fly quadcopters fit my needs the best? Thank you very much. I think this would make an awesome video topic
That little shout out, should have been a huge Thank you to Dquad for innovating Frame design outside QAV BUS styled racing quads, to the point that there are now 3 fully fledged knockoffs vying for your dollar. you really should talk to Dquad to arrange a proper longevity comparison (crash test). A true Obsession is worth every penny.
Turnigy radio I got one but how do I know what drones I can use it with know about the English French thing but how do I know which one speaks English in which one speaks French
What about FuriBee Darkmax? Would be great know.The only thing I don't like about X215 is how it looks. I would love to have it in F200 or Darkmax frame.
I'm relatively new to the hobby. I've been flying a Vusion 250 and will want to upgrade soon. Would you recommend this as a good next step up for someone wanting to get more serious? One feature I like bout my Vusion is the built in DVR on the drone so I don't have to use a Go Pro. Doesn't look like this one has something like that, any recommendations on one that is just as good that perhaps has it's own built in DVR like the Vusion? I know I can use my Aomway DVR, but i'd rather get the actual video feed for quality purposes.
G'day, Stu. Quick question from someone relatively new to the hobby. What battery would you recommend starting off with on this quad? Have hundreds of hours logged in a sim, and finally pulling the trigger on this one now that daylight savings has come around.
Hi, i am new in this hobby and i got the Furbee x215 Pro, i need help in binding it with Walkera Devo 7e Deviation software, please help i dont know what to do i cant figure it out.
Hey Stu, have you considered making and keeping up to date a "recommended products" list? I've seen other communities do this (such as the audio community) and it's really helpful for people who want to get into the hobby or progress in the hobby and want help deciding on what to buy
Hey Stu. I just got my Furibee X215 delivered today and I also have the Taranis Q X7. I'm new at this besides my Mavic Pro, I was wondering what the process is to get this thing up and flying? Please help me because I do not want to fry anything.
Hey I have a question so I'm not a total newbie at this hobby I have two quads and I'm trying to get friends into it I got into this hobby because I had a summer job and I was able to pay for it. all of my friends say it's too expensive how can I even get them to listen to me if they don't want to spend the money
Hi Stu im fresh into the fpv racing scene and want to get my first quad and gear coul you please give me a couple recomendations? right now im stck between the furibee x215 and darkmax. any others i should consider also if im pretty sure the turnigy evo is the radio for me what do i need to do to the x215 in order to use the that radio? as for gogles im still stuck any ideas?
Hey Stew!!!! Talons come in 2 styles a short and tall. Which one??? Is for what? I have heard so many things my head hurts. And what parts are the best to go in making a BEAST!!! Then I want Grumpy Trev to rip it around, I really what know what he thinks after your done with it. Thanks Jack
Hi quad looks very good for the price. Just a quick question about your Aomway Commander Goggles V1 2D 3D what antennas are you using im looking to replace mine on my quad and will buy the Aomways as soon as they are back in stock I need rhcp type. I'm very new to fpv so don't no to much about the technical stuff yet. Hope you can help.
Stu should I buy the bfight210 furibee x215 or furibee gt215 They are all on cell right now for about the same price I am new getting into the hobby but do not have a problem with making adjustments or slight repairs
It's now $275 aussie $ I know when he talks he usually talks in US $ it's just confusing but still that's a huge leap from what it originally would of been and only 6 days later. Are there only a certain number sold that the code works for then jumps back up to full price?
Hi Stew and Grumpy, really nice reviews and stuff. I am learning alot from your videos, so thank you, and love your reviews. sI have a question... (bit of info) I am a newb, but I have been building tinys and soldering tinys for a while now, and want to step it up soon. I really love building quads, and flying them, but I was wondering, if I should build my own, wich will be my first ¨real¨ quad, or if I should get a ¨fly outa'di'box type¨ Like the Furibee, What do you think?
Stu, love your videos. So helpful to someone like myself getting into the hobby. I'm still on my first "starter" drone that my wife got me earlier this year.. a Vusion 250. And of course I outfitted myself with some AOMWAY Commanders and extra batteries. Been great. Now I'm ready to ask Santa for an upgrade.. you seem to think very highly of alot of recent drones, including this Furibee X215. Wondering what you would recommend as the best for someone like myself.. I don't need the fastest thing in the world. I want something that is fun to fly, as durable as possible (I crash alot), and isn't super expensive to own. Is this the one that makes the most sense? Appreciate your recommendations.
After watching your review on this I ordered it straight away as my 2nd drone ever! I do have one issue now that it has arrived , I am unable to bind it, when holding down the bind button I get a sold red and green light, do you know of a way to flash/ update the firmware on the receiver / bind thing without a teranis controller ?
Been watching your channel for awhile, learning FPV drones and waiting for something like this to come along before getting my first drone. Sounds like the performance finally outweighed the price! Thanks for the killer reviews
Quick question for the pros.. I purchased the x215 without a receiver.. I have a Devo 7 trans that I would like to use. Can anyone suggest a receiver that will work great for the x215 if I want to use the Devo 7?
I am new into this sport ,i want to buy it but i do not if for example if the Flysky FS-i6S 2.4G Transmitter is compatible with the FURIBEE X215 PRO? If no please suggest a budget Transmitter . thank you
Stu, Did you do any PID tunning on that or is it the stock tune that you where flying? If you changed the PIDs from stock could you please let us know what you used? Thank you for the great review. I pre-ordered one of these right when they first came out, I have been looking forward to getting your opinion on it. Hopefully I will get my quad this week!
What cheap transmitter (50 euros budget) and fvp googles (50 euros budget) can I use please? Leave a link (I thought of the Cyclops googles, are they compatible?) Thanks
Stu we appreciate you in the community... Actually your videos helped get me into the sport and I dont plan on going anywhere else for reviews... You are trusted my friend!..
I love how quickly Stu said that he'd pick the broken prop when he tossed jt on the ground! 😂
How does this compare to the $99 diy drone?
😂Can't believe this is over 6yrs ago 🤯 I still have mine 👍🎉 furibee X215
What cyclones are you using on that? The 5045, 5046 or 5050?
Is it a 5 inch drone? Seems a bit small... .
It went up to 180
chad henry and now down to 146
5045, 5046, or 5050 cyclones? I want to get some, but don't know which ones.
so i just bought the leopard frame and other parts to build one... did i just make a mistake lol, hopefully mine will preform better pretty sure i have better motors camera ect. but it makes me think.....
Is it compatible with a flysky receiver?
Do i need to take license for this kind of FPV drones
How about you dub in "183.99" every time you say 150.00....
I see the question was asked below with no reply. I am also curious, which Cyclone prop did you use, 5045, 5046, or 5050? Thanks!!!
Ordered mine a month ago still hasn't shipped
Are these good for aerial video and photography?
Does it require setup?
What gopro mount are you using on it?
How does Grumpy like the FAR View Triple Feed Patch LHCP and RHCP?
is the curved body to aid in crashes (slide off better) or aerodynamics?
Hello I bought one of these furibees it has the kakute f4 v1 board non-aio. my fc shorted out from a crash so i ordered another one when I installed it, It began to spark off the positive connection that you solder to the fc when I pluged in the battery. I checked the soldering connections and everything was clean and not touching each other so I assumed the fc was bad. I recently received another one. hooked it all up plugged in the battery and it was fine however when i put it on beataflight and did a motor check this new board began to spark in the same place, What should I be checking or looking for?
Looks good Stu. Does it burst into flames on 5S and 6S ?
for a 3 inch build, whats better? a 850mah 25-50c (nanotech, 10$), 850mah 45-90c (nanotech, 15$), or 650mah 70-140c (Chinahobbyline 14$). Im conflicted because i usually use cnhl batteries, so i want the 650, but the 850 will give longer flights
Would you expect the frame would accept a Runcam Split Mini ungrade?
Hi Stu what was the song at the end of the video? Thanks for this review do you like the frame ?
mine came unable to connect to betaflight, had to reinstall firmware which lost all stock settings and the LED strip has one led out. Bad quality control.
What cyclone props did you use? 5046?
Would u recommend this drone over the bfight 210?
I'm looking to buy my first fpv drone. And I would appreciate some advice.
My requirements/what I need.
1. I need to use the Drone with a GoPro camera attached following 600+hp sandrails in Pismo and Glamis sand dunes at high speeds. I've noticed some GoPro footage is plagued with interference. How is that remedied
2. The environment is Harsh, I need something robust and crash-tested. Dust sand and water resistant
3. I need something simple that can be worked on easily, and has a straightforward utilitarian design
4. I'm considering a pre-built design. Would you recommend building from scratch or buying a rtf fpv?
5. What ready to fly or nearly Ready To Fly quadcopters fit my needs the best?
Thank you very much. I think this would make an awesome video topic
So this one cant be flown with the turnigy evo?
What remote control are you using I am getting that drone and I don’t know what controllers to get the cheapest one that works well would be great
That little shout out, should have been a huge Thank you to Dquad for innovating Frame design outside QAV BUS styled racing quads, to the point that there are now 3 fully fledged knockoffs vying for your dollar. you really should talk to Dquad to arrange a proper longevity comparison (crash test). A true Obsession is worth every penny.
What batterys did you use for the test and what C rating?
Can you please tell me what cheap fpv goggles and radio to use
First hand user experiences confirm? V2 or V1 here?
what size battery 3s would you recommend for it.
Is it a 16:9 or 4:3 camera? Thanks
What are your thoughts on getting this or the bflight 210? Which is better for the money/a beginner?
Wizard x220s or furibee x215?
What size dal props were you flying with?
Exactly what props are you using on this?
Turnigy radio I got one but how do I know what drones I can use it with know about the English French thing but how do I know which one speaks English in which one speaks French
Hey where do I look for parts to replace stuff on the stack?
If i were to get this, would it bind to my DX8 Gen 2?
Stew...
You have me a bit confused now.
What would be the better buy for my first REAL FPV racer?
The Furibee x215 Pro or the Furibee Darkmax?
What's the high gain antenna on Grumpy Trev's Aomways in this video? Great Quad!
Im looking for a second drone. But looking to build it myself. Does this come ready to fly? Or in kit form?
What about FuriBee Darkmax? Would be great know.The only thing I don't like about X215 is how it looks. I would love to have it in F200 or Darkmax frame.
What should i buy Stu, Bfight or Furibee ????
I'm relatively new to the hobby. I've been flying a Vusion 250 and will want to upgrade soon. Would you recommend this as a good next step up for someone wanting to get more serious? One feature I like bout my Vusion is the built in DVR on the drone so I don't have to use a Go Pro. Doesn't look like this one has something like that, any recommendations on one that is just as good that perhaps has it's own built in DVR like the Vusion? I know I can use my Aomway DVR, but i'd rather get the actual video feed for quality purposes.
Can you point us to a couple of compatible controller to fly this drone ?
G'day, Stu. Quick question from someone relatively new to the hobby. What battery would you recommend starting off with on this quad? Have hundreds of hours logged in a sim, and finally pulling the trigger on this one now that daylight savings has come around.
whats the best battery to get max performance out of this beast?
Is it flying out of box - i mean without changing something in Betaflight Configurator. Did you used stock props? What about flight time?
Hi, i am new in this hobby and i got the Furbee x215 Pro, i need help in binding it with Walkera Devo 7e Deviation software, please help i dont know what to do i cant figure it out.
Hi, Can you make a video from the betaflight setup for this quadcopter
Hey Stu, have you considered making and keeping up to date a "recommended products" list? I've seen other communities do this (such as the audio community) and it's really helpful for people who want to get into the hobby or progress in the hobby and want help deciding on what to buy
How long did it take for it to come
What battery should I use for this drone?
What was your cam for the footage, stock?
What spektrum rx would reccomend for this? Thanks
Does the factory config have angle mode tuned?
Better than the bfight 210?
Just ordered one what props do you recommend and batts Stue?? Thanks in advance
Are these new ones the CYCLONE T5040C Props?
So at $210, the current price, is it still a good deal?
I want to grab this , i Have a dx6i , can I use this with my dx6i?
Hey Stu. I just got my Furibee X215 delivered today and I also have the Taranis Q X7. I'm new at this besides my Mavic Pro, I was wondering what the process is to get this thing up and flying? Please help me because I do not want to fry anything.
Hey stew! What version on BF are you running on this quad? Do you tune it with your PIDs and rates before you flew this? Thanks!
Hey I have a question so I'm not a total newbie at this hobby I have two quads and I'm trying to get friends into it I got into this hobby because I had a summer job and I was able to pay for it. all of my friends say it's too expensive how can I even get them to listen to me if they don't want to spend the money
Which transmitters can be linked to it please ?. Models I mean thanks
Are you talking US dollars?
Hi Stu im fresh into the fpv racing scene and want to get my first quad and gear coul you please give me a couple recomendations? right now im stck between the furibee x215 and darkmax. any others i should consider also if im pretty sure the turnigy evo is the radio for me what do i need to do to the x215 in order to use the that radio? as for gogles im still stuck any ideas?
Hey Stew!!!! Talons come in 2 styles a short and tall. Which one??? Is for what? I have heard so many things my head hurts. And what parts are the best to go in making a BEAST!!! Then I want Grumpy Trev to rip it around, I really what know what he thinks after your done with it. Thanks Jack
Stu, people have asked before and I see no reply. Which Cyclone props would you recommend with this quad?
Cheers
Hi!
Do you have a link to the props you're using?
Hey stew wutz up with everyone and their soft mounting motors
Yo Stu!!! What size cyclones and battery are you running on this FuriBee? Just bought one because of your review.
Hi quad looks very good for the price. Just a quick question about your Aomway Commander Goggles V1 2D 3D what antennas are you using im looking to replace mine on my quad and will buy the Aomways as soon as they are back in stock I need rhcp type. I'm very new to fpv so don't no to much about the technical stuff yet. Hope you can help.
Sorry mate i know ive said it before but you keep quoting in US dollars
This thing is over 200aud
Stu should I buy the bfight210 furibee x215 or furibee gt215 They are all on cell right now for about the same price I am new getting into the hobby but do not have a problem with making adjustments or slight repairs
What's the battery you're using?
It's now $275 aussie $ I know when he talks he usually talks in US $ it's just confusing but still that's a huge leap from what it originally would of been and only 6 days later. Are there only a certain number sold that the code works for then jumps back up to full price?
Would this be on your top five under 200 bucks video
Could you update it maybe?
Hi Stew and Grumpy, really nice reviews and stuff. I am learning alot from your videos, so thank you, and love your reviews.
sI have a question... (bit of info) I am a newb, but I have been building tinys and soldering tinys for a while now, and want to step it up soon. I really love building quads, and flying them, but I was wondering, if I should build my own, wich will be my first ¨real¨ quad, or if I should get a ¨fly outa'di'box type¨ Like the Furibee,
What do you think?
Stu, love your videos. So helpful to someone like myself getting into the hobby. I'm still on my first "starter" drone that my wife got me earlier this year.. a Vusion 250. And of course I outfitted myself with some AOMWAY Commanders and extra batteries. Been great. Now I'm ready to ask Santa for an upgrade.. you seem to think very highly of alot of recent drones, including this Furibee X215. Wondering what you would recommend as the best for someone like myself.. I don't need the fastest thing in the world. I want something that is fun to fly, as durable as possible (I crash alot), and isn't super expensive to own. Is this the one that makes the most sense? Appreciate your recommendations.
would this be good with the turnigy evolotion
After watching your review on this I ordered it straight away as my 2nd drone ever!
I do have one issue now that it has arrived , I am unable to bind it, when holding down the bind button I get a sold red and green light, do you know of a way to flash/ update the firmware on the receiver / bind thing without a teranis controller ?
I want to purchase that drone.pls help me how ?that drone with packages?
Can it fly on a 5s lipo?
Been watching your channel for awhile, learning FPV drones and waiting for something like this to come along before getting my first drone. Sounds like the performance finally outweighed the price! Thanks for the killer reviews
Hey! Do you Think its possible to mount a gopro 4 on that frame? If possible what mount to use? Thanx for all your great videos.
Which drone is best ever tomorrow? And the day after? Just so I don't buy something silly :/
Trev converted to Amoway googles?
Quick question for the pros.. I purchased the x215 without a receiver.. I have a Devo 7 trans that I would like to use. Can anyone suggest a receiver that will work great for the x215 if I want to use the Devo 7?
I am new into this sport ,i want to buy it but i do not if for example if the Flysky FS-i6S 2.4G Transmitter is compatible with the FURIBEE X215 PRO?
If no please suggest a budget Transmitter .
thank you
Avraam Panayi Why wouldn't it? You can use PPM or IBUS.
Thanks a lot Brandon
Stu, Did you do any PID tunning on that or is it the stock tune that you where flying? If you changed the PIDs from stock could you please let us know what you used? Thank you for the great review. I pre-ordered one of these right when they first came out, I have been looking forward to getting your opinion on it. Hopefully I will get my quad this week!
Stock pids
is it 4s or 5s?
What cheap transmitter (50 euros budget) and fvp googles (50 euros budget) can I use please?
Leave a link
(I thought of the Cyclops googles, are they compatible?)
Thanks
Stu we appreciate you in the community... Actually your videos helped get me into the sport and I dont plan on going anywhere else for reviews... You are trusted my friend!..
Could you tell me your PIDS(BETA FLIGHT) settings?
what batteries should i buy with this quad? i have a flysky transmitter and receiver picked out but if you guys have any other suggestions! thanks!
What antenna is trev using? Not omni, the other one?
Its a patch designed by the same guy that design the pagoda antenna. You can swap it from RHCP to LHCP with a sma termination and swapping connections
Love the video!! Has grumpy trev made the switch to AOMWAY?
he has! he wanted to for ages. it just took forever to find the stock.
Just about to buy myself a set! how do the aomways hold up compared to the fatsharks dominator v3s. Have you had any issues with them?