I, too, have some broken wires in my loom and I was wondering how the hell am I supposed to fix it with the loom in the original position when there's pretty much no space to work with. Thanks for showing that the loom can be pulled through the speaker hole, much appreciated.
Bro,i ve got the 12v reaching to the switch but no power to the window motor,i checked the fuse,its good ,,any idea on how to get that power to motor??
Hello, there is another video on my chanel where i take apart the switch itself, i think you may have the same problem as what i had there, there is carbon build up on the inside of the switch, very easy to take appart and clean
@@michaelshort2200 i checked that video too but from the driver side as well,it doesn't operate so both sides may not have carbon deposit ,right??,i only hear the clicking sound which is of relay,any idea on that bro.???Reply me bro,i really not being able the find where is the problem.
@@sandeepgc9668 then there has to be a broken wire on the harness, you will have to test the wires one by one and see wich one is the one that is off, it could also be that the neutral wire is down as it also pases through the switch to change the direction of the motors
@@michaelshort2200 allright,thank you bro for reaching out,i will tryna to see.i appreciate your replies. One more thing,can we check by applying the jumper in the switch to see if the power runs down to motor.
@@sandeepgc9668 you can try that, just make sure you dont blow out the fuses on it by connecting the live to the neutral, i try to help as much as i can, that is all i am trying to do
I am not sure wich one it is, you can try to test it from one side to the other at the lock side, those locks are a pain in the rear end, my passenger door lock itself broke, cannot find one around at all
Thanks, I'll have to take it apart and figure out which cable it will be. Luckily the rear lock works ok. I can't lower the front windows and only one rear window. It's scary.
@@petrpetr9334 sorry i couldn't be of more help, i unfortunately do not have the workshop manual for the car to see wich wire color goes to wich thing and i havent traced them out myself
In my case, i cant operate passenger window from driver side switch. I replaced full switch but didnt fix it. From passenger side I can operate passenger window. I should check wiring loom I think. Thanks!
Thank you my friend for video.Was helpful!
I, too, have some broken wires in my loom and I was wondering how the hell am I supposed to fix it with the loom in the original position when there's pretty much no space to work with. Thanks for showing that the loom can be pulled through the speaker hole, much appreciated.
It is a big pleasure, i am glad i could help
Bro,i ve got the 12v reaching to the switch but no power to the window motor,i checked the fuse,its good ,,any idea on how to get that power to motor??
Hello, there is another video on my chanel where i take apart the switch itself, i think you may have the same problem as what i had there, there is carbon build up on the inside of the switch, very easy to take appart and clean
@@michaelshort2200 i checked that video too but from the driver side as well,it doesn't operate so both sides may not have carbon deposit ,right??,i only hear the clicking sound which is of relay,any idea on that bro.???Reply me bro,i really not being able the find where is the problem.
@@sandeepgc9668 then there has to be a broken wire on the harness, you will have to test the wires one by one and see wich one is the one that is off, it could also be that the neutral wire is down as it also pases through the switch to change the direction of the motors
@@michaelshort2200 allright,thank you bro for reaching out,i will tryna to see.i appreciate your replies.
One more thing,can we check by applying the jumper in the switch to see if the power runs down to motor.
@@sandeepgc9668 you can try that, just make sure you dont blow out the fuses on it by connecting the live to the neutral, i try to help as much as i can, that is all i am trying to do
Hello, what color cable is the central door lock? I can't lock with the central
I am not sure wich one it is, you can try to test it from one side to the other at the lock side, those locks are a pain in the rear end, my passenger door lock itself broke, cannot find one around at all
Thanks, I'll have to take it apart and figure out which cable it will be. Luckily the rear lock works ok. I can't lower the front windows and only one rear window. It's scary.
@@petrpetr9334 sorry i couldn't be of more help, i unfortunately do not have the workshop manual for the car to see wich wire color goes to wich thing and i havent traced them out myself
Great video cheers, mine have just stopped working so I will have a look at this
Very helpful
Dziękuję from Poland.. :) 👍💪🤝
Thanks for this vid. I bought a fiat punto and this make me ready for common issues of the Fiat punto and other models.
They are amazing little cars, but do have a few little problems hahaha
Helped me a lot
In my case, i cant operate passenger window from driver side switch. I replaced full switch but didnt fix it. From passenger side I can operate passenger window. I should check wiring loom I think. Thanks!
I think you will find your problem in that wiring loom, it is a weak spot for these cars i have seen
Yeah, almost 1 year and i fixed it. It was the wiring loom, it was like yours, my left side all broken.@@michaelshort2200