Autel IM608 & APB130 Read VW MQB NEC35XX Dashboard by Hogie Gilchrist

Video contribution by Mr. Hogie Gilchrist- one of customers from obdii365.com.
How to use Autel IM608 & APB130 adapter to read a VW polo 2016 dashboard. Retrieving the data from chip and calculating the IMMO data. This was a dashboard sourced from eBay so no ECU data available for sync calculations.

[@Mobilenckreader]

hi , you have immo data , gow to load immo data - make dealer key - key learning - all ok

[@JohnLucas-1000]

I tried to do the same on a VW Golf 2018 with an MQB NEC35xx via OBD unsuccessfully. My scenario was to add a key (proximity key). I've tried with Autel IM608 II and with VVDI2. I believe the cluster was secured and that's why I couldn't read it. May I need to do it the way you do, by removing the Instrument Cluster. Good job. Thanks for sharing.

[@LiuyangOBD365]

some 2015+ models have secured RH850 processor. better check processor and confirmed with us. If rh850 cluster, need vvdi key tool plus. they have a rh850 adapter for it. www.obdii365.com/wholesale/xhorse-xdnpr8gl-mqb-rh850v850-adapter.html

[@swarajjoye]

Hi where do you get 32 bytes CS synchronised data from please.
Thanks.

[@LiuyangOBD365]

see blog.obdii365.com/2023/03/19/where-to-get-xhorse-vag-mqb-akl-sync-data/

[@dashtyATG]

That's a great video, thank you.
The hardest part, I would say would be the pin lefting.
And Is it mqb48 ?

[@LiuyangOBD365]

yes, it is for MQB48 NEC35XX locked cluster

[@dashtyATG]

@@LiuyangOBD365 thank you sir

[@b.n.motors8489]

no need to lift the pin bro just cut the track in front of that pin and solder wire to pin

[@dashtyATG]

​@@b.n.motors8489thanks bro

[@Truthcanbeconfusing]

​@@b.n.motors8489cut path to chip leg then after key reading is done what do you do? Leave it like that? How do you put it back like the way it was?

[@user-tw6lq9oq6f]

Hello, does apb130 is really works with xp400 (not pro)? I thinking to sell my xp400 to buy after it xp400pro, which according with official descrion works with apb130.

[@LiuyangOBD365]

it works with xp400 as well.

[@rgrcarkeys2291]

@@LiuyangOBD365ok that good then

[@aurimasgo6581]

Hi,where find connection diagrams?

[@LiuyangOBD365]

it's in autel tablet

[@ukaszsmagora250]

can you share it?@@LiuyangOBD365

[@taupe7144]

Does it work for Johnson Control Dashboard ?

[@LiuyangOBD365]

yes, JC and VDO NEC35XX locked

[@ukaszsmagora250]

does it work with autel im508 and xp400 ?
@@LiuyangOBD365

[@mohammedalbasher8738]

Hey, you
How do I get the sync file 32

[@LiuyangOBD365]

here is the clue blog.obdii365.com/2023/03/19/where-to-get-xhorse-vag-mqb-akl-sync-data/

[@abee1310]

Como obtuviste el archivo de sincronia?

[@LiuyangOBD365]

see blog.obdii365.com/2023/03/19/where-to-get-xhorse-vag-mqb-akl-sync-data/

[@jonathancortes4103]

Hola amigo con que actualización de autel funciona

[@LiuyangOBD365]

free update, but need NEC35XX adapter www.obdii365.com/wholesale/autel-apb130-mqb-nec35xx-adapter.html