5:25 - I can feel the frustration. Sometimes those overly-tight clips are quite annoying and lead to damaged body panels or paint. :) You did a nice job keeping the side skirt intact. Cheers!
Confused u didn’t actually remove the side skirt from the rocker panel I’m trying to remove that piece can u make a video on that not how to remove it from the whole car actually separate those two pieces
Thank you so much this is very helpful but I have a question my Mustang is 3.7 basic and my rocker panel is lose and I found the clips are broken so where can I Buy those clips all of them thank you .
Here’s the link for some I used off Amazon Rexka 30pcs Rocker Molding Retainer Clip Screw Compatible with Ford W716352-S300 Edge Escape F-150 Mustang Lincoln Continental MKX W716352S300 www.amazon.com/dp/B07CJQMSSL/ref=cm_sw_r_cp_api_glt_fabc_CGA4S9GDR7ZEMXX2S640?_encoding=UTF8&psc=1
You have the only side skirt install video that I have found that includes the additional step of removing the rocker panel. Can you please tell me the benefit of removing the rocker panel?
@@zacharylopez4750 i was typing side skirts instead of rocker panels so if thats what your looking for try searching for rocker panels instead hope that helps!
I have a question about wrapping that plastic splitter. How to guarantee adhesion to the plastic? Is there a specific adhesion promoter or cleaner for better adhesion of vinyl wraps on the plastic that you recommend?
@@rickmassey1272 I didn’t wrap the splitter but I think it would hold okay. The new plastic is much better than old plastic. If it didn’t hold well I wouldn’t mind using some 3m primer on the back side. Only reason I didn’t wrap them is because I ran out of time.
That’s way to much crap to go through. Looked like you broke only one of the clips that hold the rocker on. I know I would have had at least three or four broken.
![Mustang ORIGINAL Side Skirt Installation [05-09]](http://i.ytimg.com/vi/FzkakiLF-ww/mqdefault.jpg)
You’re a lifesaver man; bent my rocker panel out of place after I nicked a curb. Saved me a few hundred in mechanic labor fees. Appreciate ya!
Glad I could help.
Do you know if you can just remove the side skirt and put a different new one but keep in the same rocker panel?
I found out tonight it’s actually a lot easier to remove. Just avoid someone coming at you head on and run over a curb….
Ahhahahah this is the reason I came on here too see if anyone used this method and of course
As a owner of a S550 GT.. I'm definitely subscribing to your channel.😎👍🏾
Thanks for subscribing.
Actually a good topic to show in a video !
Determined Veteran thank you
5:25 - I can feel the frustration. Sometimes those overly-tight clips are quite annoying and lead to damaged body panels or paint. :) You did a nice job keeping the side skirt intact. Cheers!
What is that whole white piece called that the rocker panel attaches to? Mine is cracked and I need to replace it
Confused u didn’t actually remove the side skirt from the rocker panel I’m trying to remove that piece can u make a video on that not how to remove it from the whole car actually separate those two pieces
did you ever find oit
Thank you so much this is very helpful but I have a question my Mustang is 3.7 basic and my rocker panel is lose and I found the clips are broken so where can I Buy those clips all of them thank you .
I got all of them on Amazon. Do I show the box in the video. I can’t remember
unfortunately it's not showing , can you please give me the link from Amazon 😀
Rexka 30pcs Rocker Molding... www.amazon.com/dp/B07CJQMSSL?ref=ppx_pop_mob_ap_share
GOOACC 240PCS Bumper Retainer... www.amazon.com/dp/B07L6FJGR4?ref=ppx_pop_mob_ap_share
Yooooou are the best ❤️❤️❤️ thank you so much
When will you do your Mexico racing video lol
Determined Veteran hopefully next week. I’ve got a few cars lined up.
@1:00 i lost the push pins or what ever they are called and i cant find them anyone know where to get some
Here’s the link for some I used off Amazon Rexka 30pcs Rocker Molding Retainer Clip Screw Compatible with Ford W716352-S300 Edge Escape F-150 Mustang Lincoln Continental MKX W716352S300 www.amazon.com/dp/B07CJQMSSL/ref=cm_sw_r_cp_api_glt_fabc_CGA4S9GDR7ZEMXX2S640?_encoding=UTF8&psc=1
You have the only side skirt install video that I have found that includes the additional step of removing the rocker panel. Can you please tell me the benefit of removing the rocker panel?
I removed the rocker panel to wrap the side skirt. They also make different rocker panels so people change those out too.
Like your vid. But you need to brighten and focus what you are filming thanks
You gave me an anxiety attack…… lol
What else can I use to take out those pins if I don’t have that tool your using
I’m not sure. You really need to use some type of panel removal tool.
4:30 mark appreciate if 🤘 i was like wth is holding it lol
You’re welcome
@@BringItMuscleCars subscribed 😁
@@moparky43 thank you
What kind of bolt did you use in place of that rivot?
Just a stainless steel one from lowes.
Anyone have a part number or somewhere i can order the oem side skirts? Not an extension the actually skirt it’d be much appreciated!
No idea but you should be able to google it. The ford dealers all share a website to order parts from.
Did you find it?
@@zacharylopez4750 i was typing side skirts instead of rocker panels so if thats what your looking for try searching for rocker panels instead hope that helps!
Very helpful. Thanks!
Your welcome
I'm going to paint all my plastic parts color shifting paint.
Cool video...
Thanks man.
I have a question about wrapping that plastic splitter. How to guarantee adhesion to the plastic? Is there a specific adhesion promoter or cleaner for better adhesion of vinyl wraps on the plastic that you recommend?
@@rickmassey1272 I didn’t wrap the splitter but I think it would hold okay. The new plastic is much better than old plastic. If it didn’t hold well I wouldn’t mind using some 3m primer on the back side. Only reason I didn’t wrap them is because I ran out of time.
That’s way to much crap to go through. Looked like you broke only one of the clips that hold the rocker on. I know I would have had at least three or four broken.
Focus!