I have had my issues with my typhoon h over the years. I still love it and still fly it today. At least I will once I get it put back together from the last minor crash which was my fault.😅 Keith
hey i have cgo2 camera on a 350qx3 and i getting a beep the camera works but the gimbal does not. When your talking about the part that tells the gimbal where it is left to right what position should the shaved part if the pin be in?
I have a slightly different problem with my CGO3, the horizon is not level, gets worse when you yaw the drone. Ant suggestions on a repair. It seems a lot of people have this issue! Thanks!!
Very informative video. Thank you! I have a newer white CGO3 4k that died. Will black cameras like yours work on my 2016 Chroma? There are more of these for sale on Ebay.
Most of the CGO# are made by Yuneec. Yours was made by Yuneec and sold and branded by Blade. I have 2, CGO2 one from Blade and one from Yuneec both white. I also have a black CGO3 4K v1 (i call it V1 because the newer ones have a quick connect instead of a pigtail wire). The firmware are different but you should not have any problems. How did your CGO die?
Stupidity! I thought I was in Smart mode, but I bumped it off when I turned off the video. A friend distracted me, so I let go of the controller expecting it to hover. It kept flying into a tree!! Everything still works except for the gimbal.
Been there done that. I lunched one of mine off a bridge over water chasing a train. But all it was doing was going down. About a foot before it hits the water i found I was in return to home. Flipped the switch and got it back. That ended my flying for the day.
hi i have a problem with joystick won't control the cam but from the top knob right left and at the left side on the back of the St16 up and down works only joystick keep beeping when moving the joystick. any help please software up to date.
Eterio Cruz I do electronic repair and order my parts in bulk from a wholesaler. I have not successfully found this part of vailable one at a time. if he interested I can sell one to you. Let me know
HI, I NEED THAT SAME PART BAD. MY CAMERA IS DOING THE SAME BEEPS. COULD YOU PLEASE LET ME KNOW WHERE YOU BOUGHT YOUR SLIDER FROM? I,VE BEEN LOOKING ALL OVER THE INTERNET BUT HAVN'T HAD ANY LUCK. I REALLY WILL APPRECIATED.
I HAVE THE Q500 4K CGO3 AND MY GIMBAL IS TILTED WHEN I TURN ON MY DRONE. IT'S SUPPOSED LINE UP STRAIGHT WHEN U TURN IT ON. BUT MINE IS TILTED SO WHEN I RECORD A VIDEO, IT'S LOPSIDED WHEN I WATCH ON MY COMPUTER. HOW DO I FIX THIS.
My code is different. Actually I am hearing two codes. The first is 4 long, one short (#9 in Morse Code). The second code is 4 long, three short. Any help appreciated!! At first this was sporadic. Now it is constant and the camera is sending signal but tilted and it moves on each beep.
Four years later your video is still helping us die hard Q500 folks! I like them for their lifting capability. Great video! Thank you!
I have had my issues with my typhoon h over the years.
I still love it and still fly it today.
At least I will once I get it put back together from the last minor crash which was my fault.😅
Keith
This is the problem iam having with my CGO3 but where can we order the part??
Can we get the namr of the manufacture that carries the part? or a link? we would appreciate it. Same issue
Same here! Please help! adam.vangaalen@icloud.com
My problem is that the camera wont level up. Tilted slightly.
Please tell me if you would.
What is the arm called that's in the shape of a C ?
Is it a pivot arm or a yardarm ?
Thanks. Keith
My cgo3 beeps 2 long and then 3 fast, any idea?
hey i have cgo2 camera on a 350qx3 and i getting a beep the camera works but the gimbal does not. When your talking about the part that tells the gimbal where it is left to right what position should the shaved part if the pin be in?
I have a slightly different problem with my CGO3, the horizon is not level, gets worse when you yaw the drone. Ant suggestions on a repair. It seems a lot of people have this issue! Thanks!!
I can't tell in which direction the wires go from the harness to the board. Please help
Very informative video. Thank you! I have a newer white CGO3 4k that died. Will black cameras like yours work on my 2016 Chroma? There are more of these for sale on Ebay.
Most of the CGO# are made by Yuneec. Yours was made by Yuneec and sold and branded by Blade. I have 2, CGO2 one from Blade and one from Yuneec both white. I also have a black CGO3 4K v1 (i call it V1 because the newer ones have a quick connect instead of a pigtail wire). The firmware are different but you should not have any problems.
How did your CGO die?
Stupidity! I thought I was in Smart mode, but I bumped it off when I turned off the video. A friend distracted me, so I let go of the controller expecting it to hover. It kept flying into a tree!! Everything still works except for the gimbal.
Been there done that. I lunched one of mine off a bridge over water chasing a train. But all it was doing was going down. About a foot before it hits the water i found I was in return to home. Flipped the switch and got it back. That ended my flying for the day.
i looked at original encoder and it doesnt have any rotating part on it also can i purchase from you?
hi i have a problem with joystick won't control the cam but from the top knob right left and at the left side on the back of the St16 up and down works only joystick keep beeping when moving the joystick. any help please software up to date.
HB Photography: I haven't had a chance to play with the st16. check out Yunec-forum.com. it has a lot of users the may be able to help.
where can you buy one of those boards? have a link you can share
Eterio Cruz I do electronic repair and order my parts in bulk from a wholesaler. I have not successfully found this part of vailable one at a time. if he interested I can sell one to you. Let me know
Quad Copter sure what's the price on the board and will it work on the cgo2+?
Eterio Cruz 10.
You have paypal?
I sent you a Google+ message.
Hi, can I buy a sensor from you?
Hey, would You post more information about the part and where to get it?
HI, I NEED THAT SAME PART BAD. MY CAMERA IS DOING THE SAME BEEPS. COULD YOU PLEASE LET ME KNOW WHERE YOU BOUGHT YOUR SLIDER FROM? I,VE BEEN LOOKING ALL OVER THE INTERNET BUT HAVN'T HAD ANY LUCK. I REALLY WILL APPRECIATED.
I HAVE THE Q500 4K CGO3 AND MY GIMBAL IS TILTED WHEN I TURN ON MY DRONE. IT'S SUPPOSED LINE UP STRAIGHT WHEN U TURN IT ON. BUT MINE IS TILTED SO WHEN I RECORD A VIDEO, IT'S LOPSIDED WHEN I WATCH ON MY COMPUTER. HOW DO I FIX THIS.
Where can I get a part as well mine beeps too 20140909 please my email is holtstowing2007@gmail.com
do you fix gimbal
Debbie Williams : Yes i do. what is it not doing?
My code is different. Actually I am hearing two codes. The first is 4 long, one short (#9 in Morse Code). The second code is 4 long, three short. Any help appreciated!! At first this was sporadic. Now it is constant and the camera is sending signal but tilted and it moves on each beep.
yo i need that part
Brandon Canales : Do you need just the blue part? let me know.
Quad Copter just need to replace the yaw controller. u pulled out an extra one you had in this video.
Quad Copter" back up slide resistor "
what could it be if my camera wont move at all
My Q500 definitely needs a new circuit-board carrying this blue part. Can anybody tell me where to order this?
cgo3 axses borad parts