I didn't have the proper tools going into replacing my charge port for my iPhone 6S Plus; therefore, it took me around 4 hours for this and at 12:22, THAT is the piece I never put back in. I realized as soon as I was finished and was shutting the front of the phone down. I was so mentally exhausted, I just went ahead and called it a rap and thank goodness a month later, my phone is just fine and charging again. But still, me never putting that piece back in makes me wonder a lot.....
Wow, nice job describing everything. I walked right through it. The right screw holding the vibrating box didn't want to budge, but I was able to swing/wiggle the whole motor which free'd it. Stripping a screw would mean a TINY plier on the outside! I can't imagine. Thanks for the video! Kudos!
hello sir, i have an iphone 6 plus and my charging port are sometimes losing its purpose, and i want to replace it with my sisters iphone 6s charging port, can it be suitable for replacement the iphone 6s charging port to iphone 6plus?
Any idea on how to remove the screw that is flat into the bottom of the phone, left of the charge port (15:35) , that is stripped? Should i remove the battery and proceed?
dude that is the ONE SCREW that I can't get out and it's driving me crazy. It's been an hour and a half so far. I know this comment was from a year ago but same
Hey quick question. I saw your both dissaembly vids about 6s and 6s plus and it seems to me that the Taptic engine on the 6s is bigger that on the 6s plus. Would be interesting to know it there is any differences if you use the both phones, i mean maybe is the feeling of the taptic engine better on the 6s because its bigger than on the 6s plus? Thanks and nice videos!
It's been an hour and a half. I'm still trying to get the screw off at 15:34. The screwdriver they gave me is so small I cant get the right angle on it. I HAVE DENTED MY FUCKING BATTERY trying to get this shit off. There's like 50 screwdrivers in this house and NONE OF THEM WORK The way you just fucking get it off without ease is so annoying wtf why is mine fucking superglued in.... I seem to done all of that shit for nothing because of this one screw fucking kill me
It took you too much time to figure out about the antenna. It's the same in 6 plus. The flex is a complete piece with the jack, microphone and charging port. The real deal is the 7. It opens from the side, not from bottom for the screen removal
Broo im salty af, i was sleeping on my phone while i was sleeping and the charger got stuck in the charger hole and now i cant charge my phone, this is to difficult😖i mine as well by a new phone but i dont have money!!!
Okay man, You gotta disconnect the Battery before messing with anything else. At least at a note on the video so people don't start fucking their shit up. lol
4 extra screws leftover. Not to bad right? Well writing this comment from the phone so must work lmao. Thanks for the video 👍
I didn't have the proper tools going into replacing my charge port for my iPhone 6S Plus; therefore, it took me around 4 hours for this and at 12:22, THAT is the piece I never put back in.
I realized as soon as I was finished and was shutting the front of the phone down. I was so mentally exhausted, I just went ahead and called it a rap and thank goodness a month later, my phone is just fine and charging again.
But still, me never putting that piece back in makes me wonder a lot.....
Thanks. I'll be watching this 3,4 times before I attempt The Repair.
Is charging assemblies of all models of 6s plus (a1522,a1687)is same ??
when i was lifting up the charge port ribbon cable, the peice that it connects to came up as well. if there a way to fix this
Wow, nice job describing everything. I walked right through it. The right screw holding the vibrating box didn't want to budge, but I was able to swing/wiggle the whole motor which free'd it. Stripping a screw would mean a TINY plier on the outside! I can't imagine. Thanks for the video! Kudos!
so the charger ports handles what other then charging , it handles the 3.5 jack? and what else..do it handle talkin
Before removing the screen flexes take out your battery flex or you will destroy your screen
hello sir, i have an iphone 6 plus and my charging port are sometimes losing its purpose, and i want to replace it with my sisters iphone 6s charging port, can it be suitable for replacement the iphone 6s charging port to iphone 6plus?
earspeaker doesnt work when dialing a number yet speakerphone works after replacing charger port?
Any idea on how to remove the screw that is flat into the bottom of the phone, left of the charge port (15:35) , that is stripped? Should i remove the battery and proceed?
dude that is the ONE SCREW that I can't get out and it's driving me crazy. It's been an hour and a half so far. I know this comment was from a year ago but same
How much it cost to get a new charging port?
so there putting adhesive on around the screen ?
Hey quick question. I saw your both dissaembly vids about 6s and 6s plus and it seems to me that the Taptic engine on the 6s is bigger that on the 6s plus. Would be interesting to know it there is any differences if you use the both phones, i mean maybe is the feeling of the taptic engine better on the 6s because its bigger than on the 6s plus? Thanks and nice videos!
It took more than 5 minutes to open this shit. I usually takes 15/20 seconds to open it.😎
My screw stopped working halfway lmao, it just won't work on the screws anymore smh.
It took this man 6 and a half minutes to remove the damn screen god damn
Apple truely made it difficult to replace this simple part smh
found this very good I did mine fine all works took me 90 mins but that was just because I took my time
an hour and a half, you do not know math
Video starts at 6:25 You're welcome.
It's been an hour and a half. I'm still trying to get the screw off at 15:34. The screwdriver they gave me is so small I cant get the right angle on it. I HAVE DENTED MY FUCKING BATTERY trying to get this shit off. There's like 50 screwdrivers in this house and NONE OF THEM WORK
The way you just fucking get it off without ease is so annoying wtf why is mine fucking superglued in.... I seem to done all of that shit for nothing because of this one screw fucking kill me
update: It took 4 hours to get that screw out
A heat gun would have made this way easier PLUS YOU NEED TO DISCOUNT THE BATTERY FIRST! before removing the screen.
It took you too much time to figure out about the antenna. It's the same in 6 plus. The flex is a complete piece with the jack, microphone and charging port. The real deal is the 7. It opens from the side, not from bottom for the screen removal
I think it took him 5 mins to take the screen off when it only took me 10 seconds but Differently i aint gonna attempt this at all
It looks like... This is supposed to be a guide?
wheres part 2
+Doug Funny Reassembly: ua-cam.com/video/w7n3g5dvVKQ/v-deo.html
oops updated the description of this video...
This whole
Thing freaked me out... I won't will
Never take it apart. Lol
It took me longer to take mines off
Slowest Display Removal I've ever seen...
TheReneFD haha shhh don’t be rude
Broo im salty af, i was sleeping on my phone while i was sleeping and the charger got stuck in the charger hole and now i cant charge my phone, this is to difficult😖i mine as well by a new phone but i dont have money!!!
This is easy what you onna bout
alright settle down nathan
Okay man, You gotta disconnect the Battery before messing with anything else. At least at a note on the video so people don't start fucking their shit up. lol
This dude is a newb... use ifixit guides.. and never use metal tweezer to pry stuff u can short out a logic board.
Your instruction is confusing and not very helpful compare to others