You can staple the vapor barrier on and they tape over the staples and joints.There is a reason to use screws instead of nails. You will learn , when you need to take something apart . Quit using nails. Screws will hold better.😅
Great job you two. My wife and I work together like you guys and we have fun together every day. If looks good to you that’s all that counts, we have a saying ( you’ll never see from the road). Keep up the great work and don’t forget to have fun too. Happy Mother’s day Kim and Thanks From Wisconsin
Need a bakers scaffold. One of those things you say why didn’t I buy this sooner. Also on the girts if you cut a couple boards to the length of the distance between the girts you and just put one at each end and sets the distance then move the spacer boards up to the next one. Saves time measuring and guarantees exact distance every time.
I was able to borrow a 2 set of "Baker" style scaffolding to install bracing and rat boards in my new shop, then found a 3 piece set with guard rails used on fb marketplace that was invaluable to install my 10' LP panel siding, especially on the 19'4" tall gable ends, along with trim, priming, caulking and painting. They allow one to cover more area with each placement than a ladder. Great choice on the vapor barrier! RR Buildings used and approved!
Happy Mother’s Day Kim. Great job you too. Y’all need some scaffolding instead of having to move those ladders around. Just my opinion. Love the channel. Cheers from South Louisiana ⚜️
get a roll scaffold About 2 section That make about 12 feet tall and add handrails be 18 feet tall It will help with Dry wall or plywood or you have two ladder same size get 2 in By 10 in 8 ft or 10 ft border the you scaffold add 2 in by 2 in board each side so can't fall off the step PS use step side of ladder
Now if moisture runs down from ceiling, it is going to sit on the the tape of the upper joint until it loosens the tape and runs down the outside of your vapor barrier.😢
I didn’t take them all off at once. I took enough for one width of the vapor barrier. Plus they say to install the vapor barrier just like you would roof tile, starting from the bottom and overlapping as you go up.
To BE QUITE ( D I R E C T ) There are a FEW Reasons ( PEOPLE ) Wil argue to and also ( NOT ) to do the insulation (VAPOR Barrier Equations. One which seems to hold WATER ? Two is they Create a PLACE for bugs, animals, and such to build homes in the long term. My KNOWLEDGE in this Half Century long quest looks more like this. WHAT YOU Choose is as important ( IF ) Not More so when the Numbers are run for YOU and YOURS alone - still. Explanation is this in a NUT Shell. Warmer locations are Less likely to see as Dramatic of changes in the Below freezing ranges. VENTIALATION is of the * Free Air * kind which has proven itself through the centuries of structures and buildings. * N O W * as in a CLIMATE of BOTH HOT and COLD meeting some where in the MIDDLE or so ? KNOW THIS. Doing NOTHING is a SURE FIRE way to Create problems where there was NONE in the beginning. HAet sources like fireplaces, wood stoves, propane and fuel oil all need both Fresh air and a Place to Get rid of exhaust gases that remain. CHIMENYS are what those then are called. WHEN COLD AIR meets warm ( CONDENSATION ) BUILDS and then FORMS. Like How * H O T * air rises. Then too in REVERSE ( COLD ) Air Drops down low doing what ( IN Total ) A Bubble or ( CIRCLE ) of events. Like a Ball rolling in a few basic directions. NO BARRIER means its all a Jumbled mess. With a BARRIER ( ITS ) what some call ( CONTROLLED ) Chaos. More or LESS. I say this today for ( I ) want you to do some basic CALCULATIONS. WHETHER you do it now or prefer to hold off on certain costs until later ? Like the insulation for Sound Deadening. WHO does it help and why ? THINK Long and Hard BEFORE YOU Reply. NOW Fast forward say a week, month, year, or decades into the future. Are YOU building this just to sell and move some where else ? or is it far more likely The END of TIME is what this product is designed to provide ? WHAT SOME WILL Do or Recommend for others ? is the exact OPPOSITE of what they will then JUSTIFY to HELP out the SOLUTION to a LIFE long problem OTHERS would rather not DEAL with PAY FOR or be Tasked with over and over and over again and again and again still going forward. DO THIS ( EXACTLY ) as I say * T O D A Y * Write it down. The Costs with , the costs without. For the products to be used only. NOT what Heating and Air conditions and other such LONG term projections could be showing. CONTROLLED Environments such as Heat Regulated spaces. Have LESS issues with HUMIDITY and also Never tend to see the rusting and corrosion that goes along with that Un-Controlled involvement. " In the END - It ALL Goes Back to the B E G I N N I N G " There is ALWAYS ( ENOUGH ) Time to do things over ( YET ) NEVER EVER Enough time to do things right the very first time ( WHY ) ??? MATH is the Answer ( BOTH ) forwards and backwards. Save a Penny to Spend Lots of BIG Bucks ) After the Fact Who WINS and then Also how much the costs ( INCREASES ) Overall still ? ? ? Its been said that ( 20/20 ) hindsight is the crystal ball of ( IF ) I only knew then what I clearly can see now - instead . No Amount of wishing or praying for a 50 / 50 BALANCE will ever reach the 100% Fantasy of getting what is supposedly ( DESERVED ) without putting in the EFFORTS to make it possible from the start of this J O U R N E Y ... YOUR Welcome in advance They Call me ( The VOICE of REASON ) That person looking over your shoulder. Asking questions and figuring out answers. NOT letting YOU do the wrong thing time and again wondering why it still is not working as expected ? ? ?
I'm a subscriber but you don't keep us informed. Why would I become a patron if you don't put anything out. I see you're numbers dropping I'm about to unsubsidized from your channel. No content to see why be a subscriber.
Hey thanks for the comment. Life happens and we've just not had the 30+ hours each week to devote to creating videos. I'm really not going to go into all the details but say again, life happens. The good news is that we do have one coming out tomorrow. Thanks for your support.
You can staple the vapor barrier on and they tape over the staples and joints.There is a reason to use screws instead of nails. You will learn , when you need to take something apart . Quit using nails. Screws will hold better.😅
Yes concrete and metal siding and roof creates lots of moisture.Vapor barrier should be a must.
Happy Mother's Day to Kim! You guys are fortunate in that you are also work partners, creating your dream together.
Hope everything is ok. Waiting patiently on your next video.
We’re good, just trying to decide if the effort to produce weekly vids is worth it. Thanks.
Great job you two. My wife and I work together like you guys and we have fun together every day. If looks good to you that’s all that counts, we have a saying ( you’ll never see from the road). Keep up the great work and don’t forget to have fun too. Happy Mother’s day Kim and Thanks From Wisconsin
well done...not quite the way I would have done it.....but effective none the less
Thanks. I asked ten different “in the know” people how best to do this and got 15 answers so 🤷🏻♂️😂
Need a bakers scaffold. One of those things you say why didn’t I buy this sooner.
Also on the girts if you cut a couple boards to the length of the distance between the girts you and just put one at each end and sets the distance then move the spacer boards up to the next one. Saves time measuring and guarantees exact distance every time.
I was thinking that exact thing yesterday. Thanks. 😀
I was able to borrow a 2 set of "Baker" style scaffolding to install bracing and rat boards in my new shop, then found a 3 piece set with guard rails used on fb marketplace that was invaluable to install my 10' LP panel siding, especially on the 19'4" tall gable ends, along with trim, priming, caulking and painting. They allow one to cover more area with each placement than a ladder.
Great choice on the vapor barrier!
RR Buildings used and approved!
Ahhh my two favorite Love Birds. First of all HAPPY MOTHERS DAY to the better half lol. Hope y’all have a great day.
A lot of work, you guys are getting it done. NICE
Happy Mother's Day, Kim with lots of love from Canada!😃
You can staple the vapor barrier on and they tape over the staples and joints.
Happy Mothers day
Hope Kim had a Happy Mother’s Day🌷🌷
Thanks much for sharing and I hope you have a wonderful day.
Good Morning Sweet Couple!! ☕️💗🦋
Good morning!
So happy to see you guys back!😊
Happy Mother’s Day Kim, and the garage doors look great and the vapor barrier turned out good 👍
You guys are getting there! Little by little! Happy Mother’s Day Kim!
Staples won’t hurt the moisture barrier. You nailed the girts back on! Same thing. Remember I offered free construction help but you didn’t ask.
Great job! Can't wait to see the solar system making power!
GREAT JOB YOU TWO IM PROUD AND HAPPY FOR YOU BOTH GOD BLESS LOVE YOU ANNAMAY
I think you two are doing a great job!
Happy Late Mothers day. And the job that you two are doing looks great so far.
looks great
Happy Mother’s Day Kim. Great job you too. Y’all need some scaffolding instead of having to move those ladders around. Just my opinion. Love the channel. Cheers from South Louisiana ⚜️
So glad to see you back welcome great videos
Thanks so much!
Did you taste those berries on the ground, to make sure they were Elk. On camera looked like they could be Deer.😂😂.
😂. Too big for deer. Camera didn’t do it justice that’s why I put my hand down for reference. Still didn’t capture it. 🤷🏻♂️
Your upper joints of vapor barrier need to go behind the the lower joint so that moisture goes down to bottom of wall.
Thanks
I know it's to late but you should not use those nails on treated lumber ,ever. Coated screws.
Thanks for the tip. Never heard that before. I’ve only installed 3 of them so far with lots more to do.
Try turning the air pressure down on your compressor so your stapler doesnt push the stapler so hard
It’s a battery powered stapler but there’s probably a string somewhere. Thx
Hope you guys are ok.
We are, thanks!
get a roll scaffold About 2 section That make about 12 feet tall and add handrails be 18 feet tall It will help with Dry wall or plywood or you have two ladder same size get 2 in By 10 in 8 ft or 10 ft border the you scaffold add 2 in by 2 in board each side so can't fall off the step PS use step side of ladder
the right name is Elk Scat
😃
Hey norm, we are camped at Hill AFB in Ogden, Utah. We went to Lava hot springs resort yesterday. How far are you from Ogden, Utah?
Hey Bennie. We’re about 45 minutes north (when we’re in Utah that is)
@@MountainBeaches we are here now@ Hill Air Force base
@@MountainBeaches good morning Norm, how’s all the update’s going
Oh, I did not realize that you have two campers. An inside one and an outside one. lol
We are worried. Where are you? Hope all is well.
We’re good. Thanks.
Norm you should always assume that someday you will heat that area.
We have always planned to, that’s why we put the radiant floor heating pipe in.
will your washer/dryer be in the utility room?
Haven’t decided
Screws are your friend
👍
Now if moisture runs down from ceiling, it is going to sit on the the tape of the upper joint until it loosens the tape and runs down the outside of your vapor barrier.😢
Are y’all not going to be posting on UA-cam anymore?
New video coming in the morning :)
Siga has tape
Yes but I had a hard time finding any of their distributors that had it in stock. I have some now though. Thanks.
Have you ever thought about a hobby sawmill
Yes we have. Maybe at some point we’ll get one.
Are you guys ok? Are you guys done with video's
Yes we are ok, and we're deciding what the future holds for our channel. Thanks!
You should really Start at the top.then you don't have to take all the the 2x4 ' off at once.😢
I didn’t take them all off at once. I took enough for one width of the vapor barrier. Plus they say to install the vapor barrier just like you would roof tile, starting from the bottom and overlapping as you go up.
To BE QUITE ( D I R E C T )
There are a FEW Reasons ( PEOPLE ) Wil argue to and also ( NOT ) to do the insulation (VAPOR Barrier Equations.
One which seems to hold WATER ? Two is they Create a PLACE for bugs, animals, and such to build homes in the long term.
My KNOWLEDGE in this Half Century long quest looks more like this.
WHAT YOU Choose is as important ( IF ) Not More so when the Numbers are run for YOU and YOURS alone - still.
Explanation is this in a NUT Shell. Warmer locations are Less likely to see as Dramatic of changes in the Below freezing ranges. VENTIALATION is of the * Free Air * kind which has proven itself through the centuries of structures and buildings.
* N O W * as in a CLIMATE of BOTH HOT and COLD meeting some where in the MIDDLE or so ?
KNOW THIS.
Doing NOTHING is a SURE FIRE way to Create problems where there was NONE in the beginning. HAet sources like fireplaces, wood stoves, propane and fuel oil all need both Fresh air and a Place to Get rid of exhaust gases that remain. CHIMENYS are what those then are called.
WHEN COLD AIR meets warm ( CONDENSATION ) BUILDS and then FORMS.
Like How * H O T * air rises. Then too in REVERSE ( COLD ) Air Drops down low doing what ( IN Total ) A Bubble or ( CIRCLE ) of events. Like a Ball rolling in a few basic directions. NO BARRIER means its all a Jumbled mess.
With a BARRIER ( ITS ) what some call ( CONTROLLED ) Chaos. More or LESS.
I say this today for ( I ) want you to do some basic CALCULATIONS.
WHETHER you do it now or prefer to hold off on certain costs until later ?
Like the insulation for Sound Deadening.
WHO does it help and why ?
THINK Long and Hard
BEFORE
YOU
Reply.
NOW Fast forward say a week, month, year, or decades into the future.
Are YOU building this just to sell and move some where else ?
or
is it far more likely
The END of TIME is what this product is designed to provide ?
WHAT SOME WILL Do or Recommend for others ?
is the exact OPPOSITE
of what they will then
JUSTIFY to HELP out the
SOLUTION to a LIFE long problem
OTHERS would rather not DEAL with
PAY FOR
or be Tasked with over and over and over again and again and again still going forward.
DO THIS ( EXACTLY ) as I say * T O D A Y *
Write it down. The Costs with , the costs without. For the products to be used only. NOT what Heating and Air conditions and other such LONG term projections could be showing. CONTROLLED Environments such as Heat Regulated spaces. Have LESS issues with HUMIDITY and also Never tend to see the rusting and corrosion that goes along with that Un-Controlled involvement.
" In the END - It ALL Goes Back to the B E G I N N I N G "
There is ALWAYS ( ENOUGH ) Time to do things over ( YET ) NEVER EVER Enough time to do things right the very first time ( WHY ) ???
MATH is the Answer ( BOTH ) forwards and backwards.
Save a Penny to Spend Lots of BIG Bucks ) After the Fact
Who WINS and then Also how much the costs ( INCREASES ) Overall still ? ? ?
Its been said that ( 20/20 ) hindsight is the crystal ball of ( IF ) I only knew then what I clearly can see now - instead .
No Amount of wishing or praying for a 50 / 50 BALANCE will ever reach the 100%
Fantasy of getting what is supposedly ( DESERVED ) without putting in the EFFORTS to make it possible from the start of this J O U R N E Y ...
YOUR Welcome in advance
They Call me ( The VOICE of REASON )
That person looking over your shoulder. Asking questions and figuring out answers.
NOT letting YOU do the wrong thing time and again
wondering why it still is not working as expected ? ? ?
I'm a subscriber but you don't keep us informed. Why would I become a patron if you don't put anything out. I see you're numbers dropping I'm about to unsubsidized from your channel. No content to see why be a subscriber.
Hey thanks for the comment. Life happens and we've just not had the 30+ hours each week to devote to creating videos. I'm really not going to go into all the details but say again, life happens. The good news is that we do have one coming out tomorrow. Thanks for your support.
use a crow bar for a that--- leverage!
Yep. Didn’t have one with me and didn’t want to drive all the way into town. Next time I’m there I’ll get one. I have 3 at home in Utah lol.