Used to use these a lot, just one addition. On the small clamping pieces we used to add a small rebate about 3mm deep ( so if you were using 20mm thick timber your rebate would be 3 x 17 mm.) . This raises your clamps above the surface so it doesn't stick when the glue squeezes out.
Very cool and simple. My only concern would be that the clamp would get glued TO the panel with squeeze out glue. I guess you could cover the clamps in tape and just but the holes through the tape.
The amount of movement required to lock them in place means they are impractical for a lot of glue ups. Think about how you need to put clamps on both sides of the panel to avoid the board cupping. They would interfere with each other. I suggest that you change the movable block for a cam. That would allow you to take up most of the slack before pulling them apart to lock them in place. I think that should work. In fact, i think I'll try it myself.
Зажимные брусочки, которые крепятся на болтах ,надо бы сделать разной толщины.Для реек различной толщины так будет удобнее.Не будет выворачивать и прижимать будет по всей толщине. А так очень хорошая штука.
Parabéns pelo excelente trabalho. Obrigado por compartilhar.
Obrigado por assistir e deixar seu comentário 😉👍🙏
Brilliant idea! Thank you.
Geweldig. Laatst heb ik het zelf ook gemaakt en dit werkt zoveel makkelijker dan gewone lijmklemmen.
Brilliant!
Very good idea 🎉
Gostei 🎉🎉
Merci, c’est excellent ! 🙏👏👏
Fantastic idea! This simple and useful bar clamp is perfect for woodworking. Thanks for sharing such a clever tool!
Thanks for watching my friend 😉👍🙏
Genius!
Thanks 😉👍🙏
Wow that beats the ones that I have already done so so simple, thanks for the video mate big thumbs up 👍👍👍
Thanks for watching 😉🙏👍
Muy ingenioso!!!
Bravooooooo❤
Thanks 😉👍🙏
Very good thanks!.
Brilliant
Nice 👍
Olá esse ficou top maravilha parabéns
Goed banget 🎉🎉❤❤
Buena idea, muy útil. Te felicito 👏👏😉
Thanks 😉👍🙏
Used to use these a lot, just one addition. On the small clamping pieces we used to add a small rebate about 3mm deep ( so if you were using 20mm thick timber your rebate would be 3 x 17 mm.) . This raises your clamps above the surface so it doesn't stick when the glue squeezes out.
But then it wouldn't keep the board flat....
very nice
Thanks for watching 😉🙏👍
EXCELENTE
Obrigado por assistir e deixar seu comentário 😉👍🙏
Show de bola, Will! Excelente trabalho!!! 😃
Abraços e se mantenha seguro aí com sua família! 🖖😊
Valeu amigo! Obrigado por assistir e deixar seu comentário. Tenha uma excelente semana com sua família. Grande abraço 😉🙏👍
Ну ты волшебник, в натуре 😅
👌👌👌👌👌
😉🙏👍
Perfect.....
Thats cool have a great day
Thanks for watching my friend 😉👍🙏
Buena idea pero mejorable...
MM77 Approved 👍🏼 👍🏼
Thanks for watching my friend 😉👍🙏
1:42, Mate, that is cool, checking your square adjustment to be central. Very cool and extremely affective.
BUENÍSIMO GRACIAS
Thanks for watching my friend 😉👍🙏
Clever! But I would make them out of those metal bars with holes in them.
Életképtelen!
Super. Odmah ću napraviti 1 par stezaljki
Thanks for watching 😉🙏👍
Very cool and simple. My only concern would be that the clamp would get glued TO the panel with squeeze out glue. I guess you could cover the clamps in tape and just but the holes through the tape.
Or put a finish on the clamps that wood glue won’t adhere to.
Or you could use a finish on the clamps that glue will not adhere to.
👍
😉🙏
Прввiтанне паважаны
Уiл !
Блiскуча , зроблена ,
пахвальна бачыць .
Дзякуй !
The amount of movement required to lock them in place means they are impractical for a lot of glue ups.
Think about how you need to put clamps on both sides of the panel to avoid the board cupping. They would interfere with each other.
I suggest that you change the movable block for a cam. That would allow you to take up most of the slack before pulling them apart to lock them in place.
I think that should work. In fact, i think I'll try it myself.
Thanks for watching 😉🙏👍
Good point. You could also use wedges.
Зажимные брусочки, которые крепятся на болтах ,надо бы сделать разной толщины.Для реек различной толщины так будет удобнее.Не будет выворачивать и прижимать будет по всей толщине.
А так очень хорошая штука.
Gostaria de saber as medidas do grampos.
Qual madeira utilizou e onde comprou?
fala campeão;
10, nota dez
grato
Deus a direção.
Obrigado amigo! Deus abençoe. Obrigado por assistir e deixar seu comentário 😉👍🙏
Excellent to see that WoodPrix has new plans what helped me save some money and energy to make it.