excellent video.....ive done this a couple times before on my 500s but a couple steps included here should make it simpler!! great clear and concise......love all the TRQ videos!
OK, I need to leave a comment about this video. Everything in this video is exactly correct dead on. I did the entire job of replacing the spark plugs and followed every step 1 at a time. I had to buy some clips for the fuel rail safety otherwise it went great. I did suck all the oil out of the spark plug holes with a vacuum on the end of a tube And I torqued my plugs to 20 foot pounds instead of 14. I just thought I’d help everybody out and thank the UA-camr for their to my project.
My manifold intake on my 2005ford five hundred has a hole melted in it want stay running what do you think would have been the cause thank you for any help
What is that line on the left side at 11:32? I removed that from mine and put came like a litre of pink/orange oil. Should I be worried? How do I refill that?
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you! Growing up, we had to buy/order a book for our make and model. Preciate you taking time to post this. Wish me luck...lol
Watching you ratchet the positive terminal back on with that longass extention made my hair raise.
Shorting a 12V will just spark. Voltage is too low to shock you.
Followed everything and I was able to do it myself in a few hours. EGR tube nut was the hardest part. Very good video, thank you.
Great content. But this is a terrible design by ford. Literally have to go through all this to change a spark plug! These engineers......
what an absurd amount of work to replace something that should be easily accessible
excellent video.....ive done this a couple times before on my 500s but a couple steps included here should make it simpler!! great clear and concise......love all the TRQ videos!
Very informative. Figuring out how to remove the connectors is half the battle sometimes. Thank you
OK, I need to leave a comment about this video. Everything in this video is exactly correct dead on. I did the entire job of replacing the spark plugs and followed every step 1 at a time. I had to buy some clips for the fuel rail safety otherwise it went great. I did suck all the oil out of the spark plug holes with a vacuum on the end of a tube And I torqued my plugs to 20 foot pounds instead of 14. I just thought I’d help everybody out and thank the UA-camr for their to my project.
What a great video! Thank you for this. I love how you explained every step. Subscribed!
You put out some great content, thank you.
Can you also use a front coil for a cylinder in the back?
is that a power steering line your loosing next to fuel pressure sensor? 11:30
Beware:
Had to heat the e g r nut... and a new o ring for the power steering.
thanks for the video.
Tks for your video, it was very helpful, i was able to do it
17:25 how did you get it back on I can’t 😅
The fasho is $400 to $500 job at shop but I charge $300 to $350 and thanks for the video step by step
My manifold intake on my 2005ford five hundred has a hole melted in it want stay running what do you think would have been the cause thank you for any help
What is that line on the left side at 11:32? I removed that from mine and put came like a litre of pink/orange oil. Should I be worried? How do I refill that?
Wanted to ask that I have a 2003 Chevy Silverado and my day lights are not working while I'm driving the truck once you know what is the problem
I did all of this and I have rattling noise when I accelerate and rough idling
Great video!
This is very helpful
Gracias mi amigo asunto concluido
Wanted to know what is the problem with my Chevy Silverado 2003 my day lights are not working while I'm driving the truck
Can not for the life of me get this egr off
What the line called that u disconnect with the 18 wrench
L I K E 👍🏿👍🏼 💯💥💯💥💯 👍🏼👍🏿 🤩🤩🤩🤩🤩
Gonna attempt Friday
Like the no short cuts
I did it now my car will not start it’s like it’s not getting fuel
It's a sel Ford 2005 v6
lets go ahead and remove the rear wheel next lets take out the rear tailight bulb lawd...
Good info, but setting a bad example... Using chrome sockets with an impact, you trying to get someone hurt?!
Just too much to remove to change spark plugs, too complicated, I'll rather take it to a mechanic 😮