HotSpring Spas | Leak Detection and Service |
Вставка
- Опубліковано 18 гру 2017
- American Pool and Spa is a certified platinum dealer of Hotspring Spas; this means that they are
a full-service sales and repairs shop. They can service anything that they sell.
Ran some blue water through it, been digging through foam for days, one of the most difficult repairs I've ever done. Ended up having to replace an entire hose that was cracked would have just been digging it out inch by inch. Getting there, slowly but surely.
nice video--thanks. but why do hot springs tubs leak so much? do they not glue/clamp all their hoses? and why does watkins continue to use this hard foam garbage instead of a superior open foam alternative like Icynene?
nice video
What about a tub that is solid plastic- can I cut away sections in a last ditch effort to find leak? Or, will it be structurally unsound after cutting off sides? This whole tub thing has been nothing but a hassle, IMO. Considering zaw saw to cut it up and throw out in sections.
Like the video! Wondering when do you typically see leaks starting, years 7,8,9..etc? Are there some brands worse then other for leaking? Keep it up!
Recently I went shopping for tubs. Most all are huge chunks of foam! Wellis tubs arent all foamed up, instead the exterior panels have insulation on them, pull them and you can see all the hoses. Also has ABS floor pan and polymer frame (no wood). Leaning towards one of those.
problem is wellis ones dont insulate well and cost way more to run for that reason. They are easier to service that is true but insulation wise jothing beats the full foamed tub.
I know Limelight series spas have clamped jet plumbing. It's made in Mexico and the labor is cheap. The Highlife series is.made in California. Do they clamp their jet tubing as well? I have a 2019 Envoy. The airline hoses are clamped but I don't see any jets in view to see if they are clamped as well. Are highlife series tubs prone to leaks?
Hey, Can I ask you something? Is it ok or is it recommended to turn the hot tub breaker off when not in use? Thanks
How does the sides come off they just stapled on my exact one has a leak
How do you get the panels off?
How do you remove the cabinet?
Do you happen to know someone near Richmond, VA that does similar work?
Where do you service
How do you remove the sides?
HELP POOL guys - - I replace the top part of the pump - but it's leaking like crazy now ... can you look at this quick video and make a suggestion? Also i have 2 pumps on this hot tub. Can i just cap off the 2 water leads when i remove this pump and just run it with one pump for a while. I want to make sure the heater is working (use tub from craigslist) but can't get pass this problem ... :( - my video - @
how do you take the panels off near the filter on a grande
I wonder how much money is cost to repair something like this
I sure wish you guys were in far north California
Did you find someone to repair yours? I’m in northern calif and need repair as well.
I think the hot springs manufacturers need todo come up with a better way to insulate the hot tubs.
That hard dense foam is a joke . Its very hard to work with and work on .Alot of the brand new hot springs tubs will be leaking within the first year. When they spray the foam at 700 plus degrees, the plumbing weakens at the joints. There stupid for that.
Hot springs suck when it comes to leaks.yea let’s put closed cell foam in a hot tub.geniuses
What are the best brands?
@@willoggthth they all have there down sides.Masterspa would be my numbers one pic.Artisean spas,Sundance,jacuzzi,I’ve been service tech and I own my own hot tub company.Hot springs makes a good tub.But it if you ever get a leak it’s just nearly impossible to repair depending on we’re the leak is and they are expensive.
Leaks wouldn’t happen with open cell.closed cell reals havoc on glue joints
Hot Springs are ". "!
Do hotsprings leak a lot?
Yes, the worst
@Diane Hesse oof
Hot springs spas are the most over priced leaking lumps of junk on the market.
What are the best brands?