I like the comment about "why not just buy one?" When you have your toys (CNC Mill) you want to play with it. It is not about being cheap or better, it is more about making it and having it on somebody's bike or such just adds a bit. As machinists sometimes we just gotta make something..even if it does not serve a purpose sometime. I love making things on my Tormach, despite the fact that I can buy it from an engineering supplies cheaper. But who cares, i made it!
The problem with people who say “just buy it” is that they don’t realise that the people who create the things that they buy are people like you!! Someone’s got to create stuff and use their skills.
Hey everyone. Re: the seemingly high feed rates, keep in mind that parts of this video are sped up to keep you from succumbing to death via boredom. Re: other manufacturing methods like die casting etc., keep in mind this is a one-off part! This is the first and only set of these that have ever been (and maybe will ever be) made. CNC machining from billet is the only way to go for a prototype like this! Re: buying commercial pegs: these are MUCH bigger than a normal footpeg. They're designed to accommodate someone in a wide snow boot, not in a riding boot or shoe. Thanks for watching!
cncguru777 Spindle speed maxed at 4000 for most or all tools (surface speed still too low). The long tool is a Cormorant 390 (I think). Used a DOC of about 0.05" and a feed rate of 140ipm for all of the roughing stuff. Pretty standard rates for everything else. Chip load of 0.004" or so on the 1/2" tooling and 0.015" on the 1/4".
That was beautiful! I just bought a four axis router, I'll never be able to do work like that with it but I can't wait to become skilled enough to make my own beautiful parts.
Jon that is awesome I have never seen some thing like that I have always wondered when folks talk about CNC parts I had a understanding but I had never had an opportunity to see it happen Thanks and Thanks again ;O)
Nice job. I've been programming for 35 years and I'll tell you one thing I have found; You give the same job and equipment to 10 different programmers and they will all come up with a slightly different program. (And according to them, theirs will be 'The Best')
Looks great, the TM1 really is an awesomely capable machine for the money and since it can run on single phase power we could all run one in our own backyard shops. keep up the great work. Gerald
Sometimes that's the case when you're prototyping a part. This was the second set I'd ever done, and there were lots of changes between this set and the first, and just as many since this was finished. Thanks for watching.
I am far from the consummate authority on CNC milling, but I have to comment. With all due respects. In your early operations, you spend a lot of time milling a deck around that square pin, then you mill away the majority of that deck in the very next op. I call that precision scrap. As for that hurricane cyclonic slot milling, not only does that beat the balls off the machine, you actually travel 4 times farther to finalize your slot. I've seen a lot of guys programming with fusion 360 use that technique. It may work in some circumstances, but I'm not a fan. I like the pegs. Nice job. I'll be curious to hear how long they stay horizontal as the aluminum sees repeated use.
Wow this is really cool, I'm a 2nd year machinist running a fadal. I have a coworker who always talks up the haa's, cool too see one in action! Cool prototype!
Very nice work. The high speed toolpaths are sweet, looked like you were using trochoidal paths. I don't understand why people feel the need to bash on how you did something that they most likely couldn't do themselves. Keep up the good work brother!
looked great i am starting to go to school next month on how to use G Code for the Hass cnc milling machine. we started a class 2 months ago but stopped for the summer it only has 5 students in it and is being taught by a master cnc machinist programmer. future looks great!!
Very cool looking foot pegs! I'd be interested to see how long they last, they'd look awesome anodized! I would make one suggestion, you should kill the coolant and use an airblast for removing chips. The coatings that are on the tools are made so that when the tool is hot it activates, spaying it with coolant doesn't allow the coating to work properly and when a hot end mill or insert is sprayed with coolant, it causes micro fractures and will kill your tool life over time. I've been selling carbide tooling for a long time and I have few if any customers that mill any material with coolant. Here's tip If you run a tool too fast and it gets all galled up with aluminum, soak the tool overnight in toilet bowl cleaner, it will come out the next day as good as new ;) thanks for posting your work!
Hi. Right on both accounts. I've since substantially reduced the peck depth on the pre-drill, and reduced the feed and increased the stepover on the roughing to reduce servo loads. Thanks for watching!
Hi. That is a Renishaw probe. It is linked to the machine via an electronic eye, and it will feed position information into the machine via macro programs. The first macro that you saw was it finding the exact center of stock stock, and feeding the coordinate into the machine as the G54 home location. Thanks for watching.
Awesome to watch the CNC process in action, I love this kind of stuff. I'm currently in the planning stage of building a cnc mill for my garage, but I'm not sure if I want a gantry style or knee style machine. Any advice on pro's/con's of each style? Thanks :)
I recently saw a lecturer at my university drive a Renishaw probe at full rapids through a 30mm thick HDPE workpiece. The probe was totalled, but it was quite amusing.
welcome to the, "you should probably be asleep" side of youtube. Hope you have a safe journey.
I just get off a 12 hour shift CNC machining, did a bit of manual today too, and watch CNC machining on UA-cam? 🤷♂️🤦🏻♂️
I like the comment about "why not just buy one?"
When you have your toys (CNC Mill) you want to play with it. It is not about being cheap or better, it is more about making it and having it on somebody's bike or such just adds a bit.
As machinists sometimes we just gotta make something..even if it does not serve a purpose sometime.
I love making things on my Tormach, despite the fact that I can buy it from an engineering supplies cheaper. But who cares, i made it!
You said it Sir! there's certain pleasure as an Inventor, designing and creating things that works and helps people or just for the fun it's awesome!
Totally agree!!
Need a tool, make a tool.
@@jonathanflores3748 .. Kiiikwkuv
The problem with people who say “just buy it” is that they don’t realise that the people who create the things that they buy are people like you!! Someone’s got to create stuff and use their skills.
that machine makes better beats that most dj's
It started to remind me of a NIN song.....
Beat me to it... By 5 years...
@@skwerldeath +9+
Hey everyone.
Re: the seemingly high feed rates, keep in mind that parts of this video are sped up to keep you from succumbing to death via boredom.
Re: other manufacturing methods like die casting etc., keep in mind this is a one-off part! This is the first and only set of these that have ever been (and maybe will ever be) made. CNC machining from billet is the only way to go for a prototype like this!
Re: buying commercial pegs: these are MUCH bigger than a normal footpeg. They're designed to accommodate someone in a wide snow boot, not in a riding boot or shoe.
Thanks for watching!
Proper info? Care to elaborate?
I am the maker, and I know plenty, including how non-optimized the toolpaths were.
Jon Proce
yaaaa sir....u r right
shafiahmad02@gmail.com
So what are the tools used, and the real feeds and speeds?
cncguru777 Spindle speed maxed at 4000 for most or all tools (surface speed still too low). The long tool is a Cormorant 390 (I think). Used a DOC of about 0.05" and a feed rate of 140ipm for all of the roughing stuff. Pretty standard rates for everything else. Chip load of 0.004" or so on the 1/2" tooling and 0.015" on the 1/4".
Dynamic tool paths are so scary! Yet so effective! Good work
I have watched a lot of videos but this has them all beat for being the most satisfying to watch. Its actually calming to watch. Wierd I know! Thanks
Shows a highly sophisticated modern machine...
Everyone in the comments: make a sick beat with it!
beautiful work of CNC. couldn't take my eyes of the whole process
Oh how I would love a pair of those for the custom I'm building. Outstanding work. Those are a true work of art.
That was beautiful! I just bought a four axis router, I'll never be able to do work like that with it but I can't wait to become skilled enough to make my own beautiful parts.
You're the king of taking small depths of cut.
I had a TM-1 when I first started. That thing was so cheap and it ran production everyday and never let me down. That's a nice prototype part.
THERE IS NOTHING MORE SATISFING THAN MAKEING YOUR OUN STUFF FULL STOP
Now this is pretty awesome. What a awesome set of programs
Really nice work mate . Quite therapeutic watching it
I kinda liked the stepped look on the underside befor the final smoothing process.
Pretty sweet piece of gear there. Thanks for sharin, always interesting to see machines do their jobs.
Jon that is awesome I have never seen some thing like that I have always wondered when folks talk about CNC parts I had a understanding but I had never had an opportunity to see it happen Thanks and Thanks again ;O)
Nice job. I've been programming for 35 years and I'll tell you one thing I have found; You give the same job and equipment to 10 different programmers and they will all come up with a slightly different program. (And according to them, theirs will be 'The Best')
At 9:00,I like the look of leaving the stairstep roughing cuts on the bottom.Light deburr and done.The final product is cool too.
Sound processing is very melodious
I don't know why but I could watch this machine working for hours...
Not if you use to work on them ... I hate them lol I just wanted to see the finished product
Ditto. If you run one, save for a new job or machine, it gets old. Especially on a 12 hour day running the same machine/style of parts all day.
Impressive. We have 18 Haas machines and love them all!
Those toolpaths are a thing of beauty...
Looks great, the TM1 really is an awesomely capable machine for the money and since it can run on single phase power we could all run one in our own backyard shops.
keep up the great work.
Gerald
Sometimes that's the case when you're prototyping a part. This was the second set I'd ever done, and there were lots of changes between this set and the first, and just as many since this was finished. Thanks for watching.
Nice touch with the cleanup on the burrs
I am far from the consummate authority on CNC milling, but I have to comment. With all due respects. In your early operations, you spend a lot of time milling a deck around that square pin, then you mill away the majority of that deck in the very next op. I call that precision scrap. As for that hurricane cyclonic slot milling, not only does that beat the balls off the machine, you actually travel 4 times farther to finalize your slot. I've seen a lot of guys programming with fusion 360 use that technique. It may work in some circumstances, but I'm not a fan. I like the pegs. Nice job. I'll be curious to hear how long they stay horizontal as the aluminum sees repeated use.
If your machine is't rigit or strong enough for a full slotting op, adaptive slotting is definitly the right way
Damn! that was crazy when you were clearing out those pockets! Gotta love profit milling
Wow this is really cool, I'm a 2nd year machinist running a fadal. I have a coworker who always talks up the haa's, cool too see one in action! Cool prototype!
Fadal's and Haas machine are the hot dog meat of CNC machines. That being said, I sure would not mind having either one to play with in my garage.
This is so cool! Wish I could get one of these in my little backyard shop!
loved it, watched the whole thing from start to end :-)
Oh Yeah. Me too mat
I could watch all day/night long.
you sir are a bit of an artist. enjoyed watching the video :)
Very nice work. The high speed toolpaths are sweet, looked like you were using trochoidal paths. I don't understand why people feel the need to bash on how you did something that they most likely couldn't do themselves. Keep up the good work brother!
Not to mention that this is in a backyard shop! Thanks for your support.
Awesome craftsmanship
That is amazing! thanks for posting this!
My eyes bleed rainbows when I see such beauty!
Not sure why people are talking crap....amazing work! I think it turned out real nice.
Not the most efficient programming but I liked this video because it actually shows an identifiable part being machined. Very cool. Nice video.
Nice work, and thanks for the high quality video.
Nicely done!
Hellified good job, man!! Excellent vid and Thx for posting!
Great work, really like your channel!
Cool slotting moves. I've never used that motion.
two things i love: CNC and motorcycles
Pretty Cool ! the movie and the part ! awesome job man !
looked great i am starting to go to school next month on how to use G Code for the Hass cnc milling machine. we started a class 2 months ago but stopped for the summer it only has 5 students in it and is being taught by a master cnc machinist programmer. future looks great!!
Nice job! I used to run a TM1. I wish it really went as fast as your video lol.
My shins already hurt watching this.
best cnc video on utube!
Oh man, I feel like you could make a sick beat with the cutting sounds of the bit. Lmao
+Micah Montoya do it!
Great work, nice video!
Very cool looking foot pegs! I'd be interested to see how long they last, they'd look awesome anodized! I would make one suggestion, you should kill the coolant and use an airblast for removing chips. The coatings that are on the tools are made so that when the tool is hot it activates, spaying it with coolant doesn't allow the coating to work properly and when a hot end mill or insert is sprayed with coolant, it causes micro fractures and will kill your tool life over time. I've been selling carbide tooling for a long time and I have few if any customers that mill any material with coolant. Here's tip If you run a tool too fast and it gets all galled up with aluminum, soak the tool overnight in toilet bowl cleaner, it will come out the next day as good as new ;) thanks for posting your work!
These are actually pretty nice tips... Thanks!
讚一個,加工速度很快,參數設置合理。
Cool design, took me a little while to realize the feeds werent actually going that fast!
I especially liked that part about the aluminum
This will make a good 80s techno
Nice méga good job 👍
es increible lo q hace esa maquinita ..
Hi. Right on both accounts. I've since substantially reduced the peck depth on the pre-drill, and reduced the feed and increased the stepover on the roughing to reduce servo loads. Thanks for watching!
Great video, we need more ! :)
Very nice job.
It's very good job!
Fast pocket cuttin was cool . It must wreak havoc on the ball, and lead screw mechanisms
Handmade Lubrification that's cool !
This is very satisfying
That’s a brutal backscratcher
Good video, tempted to making something..
Muito legal ver essas máquinas de perfeição trabalhando.
I was going to say “why not use pressure die casting” but as a DIY project it’s amazing.
You could use the machine to make casting dies. ;)
I run a haas vf2 they can be a lot of fun!!
That's really cool. thanks for sharing!
Nice work.
These are impressive speeds as far as I can tell. One hell of a machine for backyard work, isn't it?
Hi. That is a Renishaw probe. It is linked to the machine via an electronic eye, and it will feed position information into the machine via macro programs. The first macro that you saw was it finding the exact center of stock stock, and feeding the coordinate into the machine as the G54 home location. Thanks for watching.
mad skills you have
Awesome, excellent design....................
why did you scrub the steps of the back side of the peg i quite liked the look of them like that ?
Nice Job Jonh
That's what was handy. As with life, sometimes you can be picky with your source of lubricant, you just need to get it done.
Excelente demostración.
☺🤗🤗🤗🤗🤗
oh man ive been looking for a CNC machinist the past 4 months to make some custom brackets and encasement for me wish u lived next door !!
Awesome to watch the CNC process in action, I love this kind of stuff. I'm currently in the planning stage of building a cnc mill for my garage, but I'm not sure if I want a gantry style or knee style machine. Any advice on pro's/con's of each style? Thanks :)
I recently saw a lecturer at my university drive a Renishaw probe at full rapids through a 30mm thick HDPE workpiece. The probe was totalled, but it was quite amusing.
love your work mate,
if i still hade my bike i would buy a set or two from you !!
regards
That's a nice peg... wish I had a mill. :)
I liked the stepped look on the bottom.
Wow that is so neat .
I like your soundtrack :)
Very nice work
Great content
I'd guess at least that long. Your video was at least x2 normal speed of motion. Great video, I enjoyed it a lot!
great video
Awesome part!
Bellísimo posapies 👏
GREAT VIDEO
Well done!!
Badass foot peg.