RAM® No-Drill™ Vehicle Mount Installation
Вставка
- Опубліковано 21 сер 2024
- Designed for your specific vehicle, the RAM® No-Drill™ Vehicle Mount System attaches easily using existing seat bolts on the passenger side floor. RAM® Vehicle Bases are constructed from high quality steel and are available for a wide variety of vehicle makes, models and years.
RAM® No-Drill™ Laptop Mount for used in the video:
www.rammount.c...
RAM-VB-195-SW1 Compatible with:
Ford F-150 (2015-2020)
Ford F-250-F-550 (2017-2020)
Ford Escape (2013-2019)
Ford Expedition (2018-2019)
Ford Transit Connect (2014-2020)
Ford C-Max (2014-2018)
Ford Focus (2011-2018)
Ford F-150 Raptor (2015-2020)
Dodge Journey (2011-2020)
Jeep Compass (2013-2018)
Jeep Patriot (2015-2020)
For Laptop:
www.rammount.c...
For Tablets (Pair any Holder wit any Vehicle Specific Mount):
www.rammount.c...
Learn more about GDS® Technology™ here:
www.rammount.c... - Авто та транспорт
This is exactly the sort of thing I've been looking for
but doing so floody my brain
get the umbrellas
married in a hurricane
Now if would have a quick disconnect at the bottom so the passenger never knows it's there when they are.
what if the seat goes forward or backward? is it safe and can it work?
please someone help me
Wish they had more vehicle-specific mounts available. I have an HHR and the only option is to drill holes in the floor which I'm not willing to do. You guys could make a mount that slides in the middle to fit various seat bolt widths.
We do have a universal option that is similar to what you are describing. The feet slide along slotted holes so that you can adapt to different seat bolt widths. Here is a link to it if you're interested; I'd be very interested to know if this could work in the HHR. I could answer any follow up questions you might have to help confirm if this could work:
www.rammount.com/part/RAM-VB-196-SW1
Have these been tested to see what happens when the air bags deploy? Is it recommended that a passenger sit in the seat where a mount is installed?
Bought a cheap mount for now, but I will wait a bit and upgrade to this eventually. Does law enforcement use these?
Must buy
but what about european cars where driver side is on the right side of the vehicle????
Are there options for cars such as the Chevy Cruze that don't use seat bolts, but rather seat hooks to hold the seat in place?
Does this tend to work similarly on the rear bolts of the front seats? I’m hoping to set up something for 2nd row passengers.
This is awesome. You guys are truly top of the class in this stuff. What would be cool is adding additions to this same mount for other products. That way you can use one mount for an iPad and iPhone. I just bought a 2020 Toyota 4Runner TRD Pro and this is definitely on my list to buy. Does this one work for my vehicle?
Thanks! The RAM-VB-138-SW1 will work in the 2020 4Runner: www.rammount.com/part/RAM-VB-138-SW1
I'm looking for one of these for a 2022 transit 150. it's a municipality vehicle and I have a coworker with me, will this work? it looks to be really intrusive to a passenger...
is there thinner version of tray ? its quite bulky
actually i saw it at 1 min 32 seconds. what is that setup? or part called? secures screen and keyboard seperately?
These prices would cost me a 3/4 of pay check
I have a 2015 F150 without a center console. Will this mount still work in my truck and is it going to interfere with the passenger?
Hello, yes the RAM-VB-195-SW1 should still work as long as the original bucket seat bolts on the passenger side floor are still accessible. The base is designed to offset the pole as close to the center console as possible, so although it is on the passenger side, it is offset towards the center so that a passenger can still sit there, though depending on size of passenger it could be an inconvenience. We do offer quick release options to remove the pole without the base if needed.
Necesito uno de esos, dónde lo consigo ???
Will this work on a Vw passat 2005?
Do u guys have link
How on earth do I lower the desk. It’s way too high
The knob directly above the tele-pole should let you adjust the height, but if you have it as low as possible and is still too high, there are different lengths of upper & lower pole components that can be used to modify the system to change the height range.
Upper poles here:
www.rammount.com/search?query=RAM-VP-TTM
Lower poles here:
www.rammount.com/search?query=RAM-VP-TBF
Would this be intrusive for passengers in the front seat?
Typically it is not but it could depend on the vehicle. One common obstacle with these mounts is it could limit the seat's ability to adjust forward and back, but otherwise the pole remains offset to be close against the center console, so as not interfere with available leg space for the passenger.
Looks pretty intrusive to me... I would think they could definitely improve on that design
@@RAMMount I was just watching this video and thinking the same thing; the passengers left leg would get banged up on this example install. I've been looking at these for years and I'm about ready to get one. Would you guys be willing to add a custom offset to the base pole as far down as possible if I could get you measurements or a specific vehicle you guys might have laying around? For a fee of course. I know it can be done. I'd rather have it done by you guys though.
sorry this doesn't tell me chit