Truss in Revit Tutorial

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 53

  • @cadrat1962
    @cadrat1962 Рік тому +1

    Great tutorial.... One thing i discovered that wasnt covered was the roof pitch.........(top chord) Finally worked out that this adjusts when the profile height is adjusted .,. 🙂

  • @zahoorlone213
    @zahoorlone213 4 роки тому +4

    I learnt the Revit , credit goes to u. Thanks for sharing such beautiful videos....

  • @emiliano7175
    @emiliano7175 4 роки тому +28

    You don't need to extend the beams. The "cope" feature takes care of that. Also if you are not gonna do any other type of steel connection, you should set the distance of these cope connections to 0, so there's no gap in between.

    • @playerxmaya7937
      @playerxmaya7937 3 роки тому +2

      can you link how to do that "cope" and the set distance pls? thnks.

  • @areaplus447
    @areaplus447 2 роки тому

    we literally can not make it and graduate without your videos!

  • @TheEzquerro1
    @TheEzquerro1 3 роки тому

    Thank you so much for the tutorial. It is going to help a lot with my finishing project for my studies

  • @danielmitrofanov9877
    @danielmitrofanov9877 Місяць тому

    thanks! its very useful!

  • @아아-q3z
    @아아-q3z 3 роки тому

    thanks! your my best teacher

  • @viratmanchanda7516
    @viratmanchanda7516 3 роки тому

    Thank you for a wonderful tutorial

  • @brianshutts9531
    @brianshutts9531 4 роки тому +5

    Drop everything about unpinning and dragging the extend. Go up to the Steel Menu and there is a COPE option there that will create a connection between the two pieces. You have to select then CTRL select the 2nd item. Then hit ENTER. And if you change the height of the Truss the angle of the COPE will change too.

    • @brianshutts9531
      @brianshutts9531 4 роки тому

      It would have been nice for Autodesk to add the connection into the family.

    • @DD-eq2bl
      @DD-eq2bl 4 роки тому

      OMG ur reply saved me!!!

    • @MukhlishHamid
      @MukhlishHamid Рік тому

      But i cant select structural frame even i hit tab button

  • @jillmoyo6949
    @jillmoyo6949 Рік тому

    Thank you so much

  • @larry6510
    @larry6510 3 роки тому

    Thanks from Mex.

  • @meiravgoldhour109
    @meiravgoldhour109 3 роки тому

    Amazing! Thank you!!!

  • @christophermoody1448
    @christophermoody1448 Рік тому

    Nice!

  • @Virajelpitiya1111
    @Virajelpitiya1111 2 роки тому

    Thank you !

  • @wahidullahparwanayuqob3910
    @wahidullahparwanayuqob3910 4 роки тому

    It was really helpful.

  • @manu511
    @manu511 4 роки тому +1

    Love from India 😍

  • @dutchbantugan9737
    @dutchbantugan9737 4 роки тому

    Very informative

  • @carlheintz4170
    @carlheintz4170 2 роки тому

    Nice tutorial. Seems a lot easier though to make an extrusion and sort it out although that doesnt work for the flanges etc. That would take 1/5th of time and would probably serve equally well for most purposes.

  • @amirlatifi4631
    @amirlatifi4631 4 роки тому

    tanx for videos

  • @salumkidagho8375
    @salumkidagho8375 4 роки тому

    Very helpful

  • @hilmawanmrone6919
    @hilmawanmrone6919 5 місяців тому

    why my revit dont have thats family truss, where i can download it?

  • @DesignReady.
    @DesignReady. 4 роки тому +1

    This is first time i saw your face 😀

  • @mdasaduddin6127
    @mdasaduddin6127 4 роки тому

    Balkan👍

  • @fdeihcir
    @fdeihcir Рік тому

    Hi there. I have a question with regards to the connection between 3 web members and the bottom chord. how do i configure the distance between the three web members?

  • @CursedMale0
    @CursedMale0 Рік тому

    Is there a way to do something like a truss system and stub some of them to make a truss package in revit?

  • @tariqbatarseh6382
    @tariqbatarseh6382 Рік тому

    I am using revit 2023, when i press Tab to select a single beam nothing happens!

  • @fabioantonuccio9102
    @fabioantonuccio9102 4 роки тому

    well done :)

  • @discostuart1981
    @discostuart1981 4 роки тому

    Where the cope function is i have "notch" ? any idea why this is plus IS this the function i should use for cutting a rafter end up to a ridge?

  • @akashmondal2082
    @akashmondal2082 2 роки тому

    Hey can you make a video on how to make a truss using AutoCAD software

  • @luismedina2729
    @luismedina2729 4 роки тому +1

    Doesn´t this mess up the analytical model?

  • @christllussner4167
    @christllussner4167 2 роки тому

    How can I select the individual beam?? Thank you, for all you video by the way !!

  • @vanslededesign3386
    @vanslededesign3386 4 роки тому +1

    Can you make a tutorial abou a house with hipped roof how to odo the wooden trusses????

  • @chemistchemist228
    @chemistchemist228 4 роки тому +2

    @Balkan Architect - at 10:10 -I am very curious - why are you doing manual extension? It feels like cheating while I am watching this tutorial - instead you should do beam extension with some weld function that properly extends missing piece to projected piece and adds angle and welds together with 2 or 3+ point contact weld. I don't think so that your manual extending approach are usable in real construction archi plans. Just imagine - how real bridge could look in real life with manual extension. Anyway - thank you about nice tutorial - you got good tutorials and I suggest for everyone to watch it. Kind Regards! Big LIKE from Me! :))

  • @carlheintz4170
    @carlheintz4170 2 роки тому

    Also, I wonder why they couldnt just automatically cope the items? It seems like nobody would like the original look

  • @markomarkomarko
    @markomarkomarko 4 роки тому +1

    Joj, mirroruj ispunu da ne budu štapovi dijagonala pritisnuti nego zategnuti.
    Za sve inžinjere i arhitekte - prve dijagonale iz centra kreću od donjeg pojasa na gore (:

    • @stolek6908
      @stolek6908 4 роки тому

      Ima se tu svašta dodati , pogotovo za dimenzije, dimenzionisanje, oblikovanje rešetke , ekonomičnosti materija, iskorištenosti čelika itd, u svakom slučaju postoje pravilnici za konstrukcije pa ko voli nek izvoli . Ali mora se priznati dečku da radi sasvim OK.

  • @pjetri24
    @pjetri24 4 роки тому +1

    Can you do a full video explaining the joints as well ?

    • @balkanarchitect
      @balkanarchitect  4 роки тому +1

      Hi I have a full course on steel connections, you can find it on Patreon, also it will be available soon on my new website 🙂

  • @winloveanosa6197
    @winloveanosa6197 4 роки тому

    Do you have free revit families for truss that you can share?

  • @carepointglobal1356
    @carepointglobal1356 4 роки тому

    Can you finish by adding connections and loads and send tlo robot structures for analysis

  • @tonyjohnson3569
    @tonyjohnson3569 3 роки тому

    I used this method to create a wooden truss. But during coping, the members would not join

  • @giovannicrepaldi6943
    @giovannicrepaldi6943 2 роки тому

    What are you doing? If you extend the beams it will look preetier but it wont work in any way, you will fuck up the analytical model, the mass, the volume... the WHOLE project will be unusable

  • @Belive_trust_wait
    @Belive_trust_wait 4 роки тому

    How downlode revit software i want link

  • @Vechniy_Kayf
    @Vechniy_Kayf 4 роки тому

    ..для чего изначально системные семейства ферм сделаны так криво ??

  • @MrDiki30
    @MrDiki30 4 роки тому +1

    Its good, but.. bim concept ruined

  • @darthhulka-burger3187
    @darthhulka-burger3187 3 роки тому

    VLAD can draw Truss faster weeth Crayon....and looks much bey-tterrr. ANd not een annoying way (Cope thees, cope that, extend thees, cope thees, extend that, cope that....so much for doing things the easy, automated vayy.
    Eeesss how you Amerikan-ski say? "Work weeth the hard, not the smart."
    Just use AutoCAD...much faster, much easier.