How to Re-calibrate Joysticks of Radiolink 12CH/10CH transmitter AT10II
Вставка
- Опубліковано 30 жов 2019
- 1.Plug in the proper battery first
2.Press “END” on the left and “Push” on the right and power on simultaneously
3.Enter the joysticks Calibration menu
4.Calibrate each channel one by one
5.CH1
a: CH1UP: Press “End” to empty the data value
b: Push Rudder joystick to the LEFT and the value will change to minimum
c: Press “MODE” to confirm and there will be [OK] shown on the screen
5.2 CH1CT
a: Press “End” to empty the data value
b: oggle the Rudder joystick at the center point
c: Press “MODE” to confirm and there will be [OK] shown on the screen
5.3 CH1DN
a: Press “End” to empty the data value
b: Push Rudder joystick to RIGHT
c: Press “MODE” to confirm and there will be [OK] shown on the screen
6.CH2:
6.1 CH2UP
a: Press “End” to empty the data
b: Push Rudder joystick to up top
c: Press “MODE” to confirm and there will be [OK] shown on the screen
6.2 CH2CT
a: Press “End” to empty the data
b: Toggle the Rudder joystick to middle position
c: Press “MODE” to confirm and there will be [OK] shown on the screen
6.3 CH2DN
a: Press “End” to empty the data
b: Push Rudder joystick to DOWNWARD
c: Press “MODE” to confirm and there will be [OK] shown on the screen
7.CH3:
7.1 CH3UP
a: Press “End” to empty the data
b: Push Throttle joystick to up top
c: Press “MODE” to confirm and there will be [OK] shown on the screen
7.2 CH3CT Centre
a: Press “End” to empty the data
b: Move the Throttle joystick to center point
c: Press “MODE” to confirm and there will be [OK] shown on the screen
7.3 CH3DN
a: Press “End” to empty the data
b: Push Throttle joystick to DOWNWARD
c: Press “MODE” to confirm and there will be [OK] shown on the screen
8.CH4:
8.1 CH4UP
a: Press “End” to empty the data
b: Push Throttle joystick to LEFT
c: Press “MODE” to confirm and there will be [OK] shown on the screen
8.2 CH4CT
a: Press “End” to empty the data
b: Toggle the Throttle joystick to center point
c: Press “MODE” to confirm and there will be [OK] shown on the screen
8.3 CH4DN
a: Press “End” to empty the data
b: Push Throttle joystick to RIGHT
c: Press “MODE” to confirm and there will be [OK] shown on the screen
9.When finish all channels calibration with joysticks, power-off and repower-on AT9S
Amazon US purchase link: amzn.to/2XFshyz
Aliexpress purchase link: www.aliexpress.com/item/32971...
#radiolink#AT10ii #radiolinkat10ii#dronecontroller#dronetransmitter#at10iitutorial - Розваги
Wonderful video, but how can you operate two rsd12 channel receivers on the radiolink at10ii 12-channel transmitter?????? I understand this radio has a 15 model memory! Your professional feedback is always appreciated. Thank you 😊
Hi, sir. Just make sure two receivers bind to AT10II successfully, And then you can operate 2 R12DS receivers at the same time.
Using proprietary communication technology of RadioLink, DSSS and FHSS hybrid spread spectrum, as a foundation, we have added the CRSF* protocol from the TBS. AT9S Pro is compatible with TBS Crossfire. Is it in thisRadiolink AT10 or not.
Hi, sir. AT10II is also compatible with TBS Crossfire. Here is the link for your reference: ua-cam.com/video/9h-B1YfdI50/v-deo.html If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Hi I am using a reversing throttle for a multifunction ship. How do I get the radio to recognize on start up that the throttle on Ch3 is off when the joystick is centred?
Are you using a two-way ESC? If yes, the throttle is always off when the joystick is centered.
Helpful for beginners 👍
And you have to speed up your skills 😎
And 1more thing
For every fpv drones RX needed separately
Example I have 3 fpv drones so for that 3 Receiver I should have ?
Thank you for your question. If I understand your question correctly, yes, 1 receiver for 1 drone if you don't want reinstall each time. Otherwise if you have only one receiver, you'll have to remove it and install each time flight a different drone.
@@Radiolink_official Thanks for your reply,
There are s bus, I bus, and so on can you make a video of it, that will be good,
And types of receivers are different for 3D helicopter
And fpv drones
For fpv drones I think small receiver will be..
@@peaksetgaming6062 Hi Thank you for your advices. Here is the table of all our available RX radiolink.com.cn/doce/receiver-comparison-table1.html
Is this a good budget radio for flying edf jets and 50cc planes? :)
Thank you for your interest in RadioLink AT10II. Sure it can. Its multiple functionality is suitable for various aircraft types.
can you do a video on how to factory reset it? i messed up some settings and im trying to fix them
Hi, Sir. Sorry to reply so late. Pls enter the basic menu-MODEL TYPE --RESET. But pls note the reset if for this type. If you want to reset all datas on AT10II, you need to reset every type.
Aiuto.. Come faccio a mettere il modello della automobile al posto che l elicottero?? Ho bisogno di configurarlo per un truck rc.. Grazie In anticipo
Hi Daneil Thank you for choosing RadioLink product. Please make sure the firmware version is V1.4.1 where you can check in the PARAMTER menu. If it isn't, please follow the steps and download from www.radiolink.com/at10ii_firmwares . Always make sure the USB cable used is of data transmission instead of charging function only. Feel free to send mail to after_service@radiolink.com.cn if there's more question.
Is it good for FPV flying?
YES! Besides radios, we also have different drones for pilots of various levels to enjoy FPV fun! radiolink.com.cn/doce/product-categorie-38.html
AT10II has 4 km range? :)
@@sarfarazulhaq4577 Yes! The receiver R12DS packed is with dual antenna which ensures its control range.
Using proprietary communication technology of RadioLink, DSSS and FHSS hybrid spread spectrum, as a foundation, we have added the CRSF* protocol from the TBS. AT9S Pro is compatible with TBS Crossfire. Is it in thisRadiolink AT10 or not.
Français.svp.merci😮