Few bits if info I have learned are: Always wait a 1/2h or more after filling an empty heater. The wick needs time to saturate before its lit or the capillary flow if fuel can be blocked, like an airlock in a vehicle's fuel system. Make sure all the small holes in the flame spreader and the bottom if the chimney are clean if you want a blue flame. Aladdin's secret to a blue flame was in all those small holes. And close the chimney all the way as soon as its lit. It will burn really smokey with it open. If you light it and quickly close it you wont get much smoke smell. Hope you get it running nice. Cheers
Thank you Sandy , I will follow these steps , it is burning very nicely now with a new wick , I'm looking for a parts rig so I can have the original top , my home made job works but Its just temporary. Wow does it work nicely when set up rights!!!! Thank you Sandy. Merry Christmas 🎅
I'm using mine as we speak on my boat it's a great heater. Just a few things you need to remember. 1,you must have good ventilation or you WILL die. 2, use only c1 fuel it's refined parafin and will burn cleanly with no smell.
I will do a part 3 , I ordered a new Wick in the mean time as I'm not happy with the flame , it should be Blue. I also have it all apart and I will show you what I found ! , this will be beneficial for any Model 15 owners. I have figured out how to properly raise and lower the Wick, Do not force your wick adjuster, it will be detrimental. If your unit has been sitting dry for allong time I can help you !
Your welcome, interesting video for us all to watch though, Thanks for putting it up. I,m sure there are hundreds od those heaters around tucked away n sheds that will come out when the gas bills all go sky high over here soon. I recall my parents using one in the stairwell and wowee It got hot!! When the paraffin ran low tho it did nt half stink the house out though, and the windows always misted up on the front door too.
@@MrGreenBentley I run into one about once a year , they sit dry and the riser for the wick will seize inside the tank , people with force the wheel trying to raise the wick and strip it out , I find now the best thing is to fill the tank up and slosh the fuel around pre soaking the mechanism every few days resulting in helping break it free . This was my first time fooling with one and it was a challenge. The next few I helped folks with were a breeze . They are indeed very good Heaters 👍
Now that's a cool old stove for sure. I've never seen the Aladdin brand before. Probably be really hard to find a top for it. Just a thought that might work. You could probably find a vintage metal hubcap from a car. Maybe the old crome moon style cap to make a top.
@@BluegrassBushcraft I did , and it helped quite a bit , the problem now is the Wick will not come up high enough to get the blue flame , I cheated and pulled it up by hand as high as it should go and got the blue flame . Can't wait to get the new Wick!
Cool idd, I use a Haller Saffire. Same thing only the blue flame is viewed in a glas bulb. Both items do get arround 500 celcius but the cool part is, the are very economical. Full tank will give you 40 hours of nice warm heat. Wickes with fiberglass top costs 5 euro on aliexpress and free shipping. That wheel is the wick adjuster, wenn it is set perfectly the flame is blue not orange or yellow just perfect blue. Take good care The Netherlands 🔥🇳🇱
@@doinsngoins ua-cam.com/video/dv4X_BiCGc0/v-deo.html The other one is the Haller Saffire that is the one I have. Yhe Haller is Dutch made, the Aladdin is made in the UK
Hi, I know this comment is 2 years old at this point, but I wondered if you could please help find me the right size wick. I just got this heater last weekend as an impulse buy and it isn't looking nearly as good as this one or the one in the video you posted a link to. The problem is that the wick is stuck to the internal metal tube (dryrotted?), and even with trying to pry it lose with some very thin metal plates I can't get it to move without risking completely breaking the wick. I am also looking for a wick trimmer as well. I tried finding a wick for a decent price online, but all I can find are about 35 euros and with that out of my budget. Could you please help me find the right size wick, and if possible a wick trimmer as well? I am just getting into this hobby and would love to learn more, and any succes would be wonderfull. Thank you very much! All help is greatly appreciated.
Do some research! By turning that knob it does raise & lower the wick! The wick has to be stuck. Once free, it will move up& down. That’s what gives u the blue flame. Right now the wick is too high, and not adjustable!! Found one exactly like yours (same model) at the local transfer station. New wick hasn’t arrived yet! My wick was stuck also!! Good luck!
Hello Walter, I am currently in the same situation with a stuck wick. I tried prying it lose, but to no avail. If possible I would like to use the same wick for some time while I locate a new one. Could you please advice me on how to do this? Thank you in advance.
Mate the knob winds the wick up down may not be connected or broke never put fuel on the wick like that unless ur burning it off fill it up leave 15 mins then light it wick couple ove mils up should read up on these if ya haven't got a clue like u
Ahhh back to the days when we actually made things here in England solid and reliable had my aladdin for years and still the best heater I have .
Thanks Peter , just found an original box for it randomly at a garage sale , great Heaters , thanks for stopping by please come back ! 😀
Few bits if info I have learned are: Always wait a 1/2h or more after filling an empty heater. The wick needs time to saturate before its lit or the capillary flow if fuel can be blocked, like an airlock in a vehicle's fuel system. Make sure all the small holes in the flame spreader and the bottom if the chimney are clean if you want a blue flame. Aladdin's secret to a blue flame was in all those small holes. And close the chimney all the way as soon as its lit. It will burn really smokey with it open. If you light it and quickly close it you wont get much smoke smell. Hope you get it running nice. Cheers
Thank you Sandy , I will follow these steps , it is burning very nicely now with a new wick , I'm looking for a parts rig so I can have the original top , my home made job works but Its just temporary. Wow does it work nicely when set up rights!!!! Thank you Sandy. Merry Christmas 🎅
Boy that is a cool heater Steve 🤩
Have a great Saturday finding treasures 😉❤️🔥🙏🏻🤟🏻
Thanks Donna!!!!! 😊
I need to get my butt over there and see what you are up to !!!!!!
I'm using mine as we speak on my boat it's a great heater. Just a few things you need to remember. 1,you must have good ventilation or you WILL die. 2, use only c1 fuel it's refined parafin and will burn cleanly with no smell.
Thank you for the feedback! I will remember these things ! Thank you for sharing!!!!
Nice! I'm looking to buy one in Canada - nostalgia of my grandparent's cottage
Can't go wrong they work very well ? Goo luck!
I will do a part 3 , I ordered a new Wick in the mean time as I'm not happy with the flame , it should be Blue. I also have it all apart and I will show you what I found ! , this will be beneficial for any Model 15 owners. I have figured out how to properly raise and lower the Wick, Do not force your wick adjuster, it will be detrimental. If your unit has been sitting dry for allong time I can help you !
you lit the wick with no cap screwed onto the filler tube, NAUGHTY NAUGHTY !!
I certainly did , that was foolish, thanks for pointing that out
Your welcome, interesting video for us all to watch though, Thanks for putting it up. I,m sure there are hundreds od those heaters around tucked away n sheds that will come out when the gas bills all go sky high over here soon. I recall my parents using one in the stairwell and wowee It got hot!! When the paraffin ran low tho it did nt half stink the house out though, and the windows always misted up on the front door too.
@@MrGreenBentley I run into one about once a year , they sit dry and the riser for the wick will seize inside the tank , people with force the wheel trying to raise the wick and strip it out , I find now the best thing is to fill the tank up and slosh the fuel around pre soaking the mechanism every few days resulting in helping break it free . This was my first time fooling with one and it was a challenge. The next few I helped folks with were a breeze . They are indeed very good Heaters 👍
Now that's a cool old stove for sure.
I've never seen the Aladdin brand before. Probably be really hard to find a top for it.
Just a thought that might work.
You could probably find a vintage metal hubcap from a car. Maybe the old crome moon style cap to make a top.
Yeah... that's what I was thinking, my home made job will due for now , when that wick comes in it will burn blue and cleaner.
@@doinsngoins Did you try trimming the wick? On other kerosene heaters you could trim less than 1/4 inch off the top and get more life out of it.
@@BluegrassBushcraft
I did , and it helped quite a bit , the problem now is the Wick will not come up high enough to get the blue flame , I cheated and pulled it up by hand as high as it should go and got the blue flame . Can't wait to get the new Wick!
@@doinsngoins Someone must have already trimmed in the past.
@@BluegrassBushcraft Yes I cannot get the wick to come up high enough on its own in order to stay burning.
The flame has to be bleu! You have to higher or lower the wick a. Iff you not burn bleu than your wick will be gone very quick.
Ok thank you for the feedback
Cool idd, I use a Haller Saffire. Same thing only the blue flame is viewed in a glas bulb.
Both items do get arround 500 celcius but the cool part is, the are very economical. Full tank will give you 40 hours of nice warm heat.
Wickes with fiberglass top costs 5 euro on aliexpress and free shipping.
That wheel is the wick adjuster, wenn it is set perfectly the flame is blue not orange or yellow just perfect blue.
Take good care
The Netherlands 🔥🇳🇱
Do you have a video posted ? Love to see it ???
@@doinsngoins ua-cam.com/video/dv4X_BiCGc0/v-deo.html
The other one is the Haller Saffire that is the one I have. Yhe Haller is Dutch made, the Aladdin is made in the UK
@@doinsngoins
ua-cam.com/video/VKKqtdoFA48/v-deo.html
Hi, I know this comment is 2 years old at this point, but I wondered if you could please help find me the right size wick. I just got this heater last weekend as an impulse buy and it isn't looking nearly as good as this one or the one in the video you posted a link to.
The problem is that the wick is stuck to the internal metal tube (dryrotted?), and even with trying to pry it lose with some very thin metal plates I can't get it to move without risking completely breaking the wick. I am also looking for a wick trimmer as well.
I tried finding a wick for a decent price online, but all I can find are about 35 euros and with that out of my budget. Could you please help me find the right size wick, and if possible a wick trimmer as well? I am just getting into this hobby and would love to learn more, and any succes would be wonderfull. Thank you very much! All help is greatly appreciated.
Do some research! By turning that knob it does raise & lower the wick! The wick has to be stuck. Once free, it will move up& down. That’s what gives u the blue flame. Right now the wick is too high, and not adjustable!!
Found one exactly like yours (same model) at the local transfer station. New wick hasn’t arrived yet! My wick was stuck also!!
Good luck!
yes I figured it out , it was seized up inside , I got it free and it works great .
I also found an original top for mine as it was missing.
Great, i knew it would work! Glad u found a cover (top)!
Don’t give up!!!
@@walterlamb4756 Thanks Walter , I appreciate you stopping in !
Hello Walter,
I am currently in the same situation with a stuck wick. I tried prying it lose, but to no avail. If possible I would like to use the same wick for some time while I locate a new one. Could you please advice me on how to do this? Thank you in advance.
It's definitely supposed to have a top
Thank you , I fabricated on in the meantime, works better but probably nowhere as 👍 good
❤
Thank you
Hello, which model is this heater: Aladdin Blue Flame Heater H 2201.
which wick do I need for this?
That is correct 👌
P15 Is the one I used
Mate the knob winds the wick up down may not be connected or broke never put fuel on the wick like that unless ur burning it off fill it up leave 15 mins then light it wick couple ove mils up should read up on these if ya haven't got a clue like u
OK well thank you for that inspirational comment much appreciated, and you take care of yourself OK,
I grow up using one of these it needs a new Wick probably if you ever wanna sell it comment back at me and we will go from there
Yes thank you, I'm not an expert, I did post a second video after getting a new Wick , it works beautifully 👌
What the heck is up with your hair man?!
You dont like my hair ? thats it haaaHaaa , sorry my hair offended you , have a great evening!